INNOKIN PLEXUS PRO & GO DEVICES REVIEWED BY BIGBOB2322

Bigbob2322

Vaping Master
ECF Veteran
Verified Member
  • Jul 27, 2014
    8,573
    23,546
    Schiller PK IL USA
    Hello folks and welcome back for today's review on 2 devices that are very similar but in the same token very different. I'm talking about the Plexus Pro and the Plexus Go devices from Innokin. Both of these devices are tube type vape devices with the Pro having adjustable wattage and adjustable airflow control with a rechargeable 1350mAh internal battery with a maximum power output of 25 watts. The Plexus Go on the other hand is a simpler device having fixed wattage by way of smart wattage in which the device senses the pod being used and sets the correct wattage for that pod. There is adjustable airflow as well with a rechargeable 1000mAh internal battery with a maximum wattage output of 20 watts. Both can be vaped using the button or auto draw, the button can be deactivated on both devices. Let's check out these 2 gems now.


    1765724219244.png



    COLOR CHOICES ( PLEXUS PRO )


    1765724375579.png



    COLOR CHOICES ( PLEXUS GO )


    1765724425309.png



    IN THE BOX
    ( PLEXUS PRO )


    * Innokin Plexus Pro Device


    * Plexus 0.6ohm Dual Mesh Cartridge 2ml

    * Plexus 0.8ohm Mesh Cartridge 2ml

    * Quick Guide


    IN THE BOX
    ( PLEXUS GO )


    * Innokin Plexus GO Device


    * Plexus Cartridge (2ml/0.8ohm Mesh)

    * Quick Guide


    PLEXUS PRO SPECIFICATIONS AND PARAMETERS



    Specifications​


    Plexus Pro Parameters:




    PLEXUS GO SPECIFICATIONS AND PARAMETERS


    Specifications​


    Plexus Go Parameters:





    PLEXUS PRO FEATURES


    1765726843231.png


    1765727103291.png

    1765727123373.png

    1765727179093.png



    • Dimensions: Sleek and Portable


    • 360°Transparent Pod Cartridge: 2ml E-juice Capacity


    • Rechargeable Internal 1350mAh Battery


    • Top Slide Filling Design


    • 0.87-inch Color Display Screen: Battery Life, Output, Resistance and Puff Count


    • For Tight MTL / Light RDL


    • Resistance Options: 0.6ohm Dual Mesh Coils (20-25W) / 0.8ohm Mesh Coil (13-16W) / 1.2ohm (Best for MTL)


    • Compatible with Innokin Plexus Replacement Pod Cartridge


    • Type-C Fast Recharging


    • 0.01s Fast Draw Inhalation


    PLEXUS GO FEATURES


    1765726882962.png


    1765727222085.png



    • Dimensions: Sleek and Portable


    • 360°Transparent Pod Cartridge: 2ml E-juice Capacity


    • Rechargeable Internal 1000mAh Battery


    • Top Slide Filling Design


    • 20W Max Output For Vaping


    • For MTL - RDL


    • Resistance Options: 0.8ohm Mesh Coil (13-16W)


    • Compatible with Innokin 0.8ohm and 1.2ohm Plexus Replacement Pod Cartridge


    • USB-C Fast Charging


    • 0.01s Auto-draw Inhalation


    iTASTE POD



    1765727507396.png












    BrandInnokin
    Product NamePlexus Pro Kit
    Max Output25W max
    Battery1350mAh
    Display0.87" color screen
    Airflow ControlRear airflow control
    Frame304 Stainless Steel
    Included Cartridge1x 0.6Ω Dual Mesh, 1x 0.8Ω Mesh
    Refill SystemTop-sliding refill
    Capacity2ml
    ColorMidnight Black, Navy Blue, Shadow Grey, Pearlescent Cream, Pearlescent Rosaline, Iridescent Lavender
    Packing Size70*25*145mm (1pc)
    Carton Size39*35.5*28.5cm (130pcs, approx. 16.78kg)
    BrandInnokin
    Product NamePlexus Go Kit
    Battery Capacity1000mAh
    Max Output20W
    DisplayLED indicator
    AirflowSide airflow control
    Included CartridgePlexus 0.8Ω Cartridge
    Draw Activation0.01s auto-draw
    Pod Capacity2ml
    FillingTop filling
    ColorFrost Blue, Indigo Blue, Moonlight Silver, Midnight Black, Sakura Pink
     

    Bigbob2322

    Vaping Master
    ECF Veteran
    Verified Member
  • Jul 27, 2014
    8,573
    23,546
    Schiller PK IL USA
    1765728940231.png



    1765729035475.png



    FIRST IMPRESSIONS


    Packaging of both devices are pretty standard with both devices resting in a foam cutout, the Plexus Go only comes with 1 0.8Ω pod while the Plexus Pro comes with a 0.8Ω and a 0.6Ω pod.

    Both devices are pretty lightweight with the Go being in a Matt Black color and the Pro being in the Iridescent Lavender color that really shines in good lighting conditions. Both devices were off and needed to be turned on with 5 quick presses of the fire button.

    Surprisingly both devices were fully charged when plugging then in to charge. Checking the strength of the pod magnets I found them to be strong, so strong it actually connects itself when the pod is very close to the device.

    The pods are top fill by way of a sliding top cap that has a arrow pointing which the way to slide the top cap, I wish it was white in color because in dark conditions it's hard to see it.


    20251213_073705.jpg

    20251213_074716.jpg

    20251213_074834.jpg

    20251213_075635.jpg

    20251213_120905.jpg

    20251213_101027.jpg

    20251213_101931.jpg
     

    Attachments

    • 20251213_121055.jpg
      20251213_121055.jpg
      700 KB · Views: 1

    Bigbob2322

    Vaping Master
    ECF Veteran
    Verified Member
  • Jul 27, 2014
    8,573
    23,546
    Schiller PK IL USA
    Airflow is fully adjustable on both devices by way of a slider control using 3 holes that can be reduced to tailor the vape, fully open is a RDL vape, completely closed down is a tight MTL vape. The USB-C charge port is in different spots for both devices, both can be charged in the upright position.


    20251213_093546.jpg

    20251213_093344.jpg



    Innokin ships these devices with a sticker covering the bottom of the pod to prevent a accidental firing so don't forget to fill the pods, let them sit for 5-10 minutes then remove the safety sticker. Both devices use 1 airflow intake nozzle making the airflow very smooth and quiet.


    20251213_091907.jpg



    The biggest difference between the two devices is a slight more battery capacity ( 350mAh ) and a display screen with adjustable wattage on the Pro and it's a hair taller than the Go. Both batteries last a good long time and depending on your style and frequency of vaping you should get a full day of life or need 1 recharge. The Pro shows you the battery strength along with a puff counter on a screen while the Go uses a LED ring around the fire button with 3 colors indicating battery strength.


    GREEN - 100-30%

    YELLOW - 30-10%

    RED - 10% And Under


    20251213_082154.jpg

    20251214_111551.jpg



    FINAL IMPRESSIONS


    My thoughts on both devices are this, each one has it's place. For the vaper that likes to play with wattage settings fine tuning their vape to their particular liking along with a visual showing their info on a screen then the Plexus Pro is for them. I haven't even said how great the flavor is on both of these pods, Innokin coils and pods have had good flavor in the past but they have really improved on their flavor production with these pods.

    I like the fact that on the Go everything is set for me except for airflow, it makes things simple for out and about trips. Both of these devices have the ability to lock/unlock the fire button with the simple quick 4 presses of the fire button. I prefer a device with a auto draw feature if it functions correctly and both devices do it nicely.

    It really doesn't matter to me which device I grab because there pretty much the same device. I also think that the Plexus Go would make a great choice for someone transitioning from cigarettes to vaping because it's so simple to use with great flavor as well. The top fill is a great bonus also.

    I highly recommend both the Plexus Pro and the Plexus Go and give them both a solid A rating. I would like to thank Alisa and Innokin for providing both Plexus devices for my review and I would also like to thank all of you that read my reviews.


    THANK YOU
    BIGBOB2322
     

    Users who are viewing this thread