InnoVapor Order And Shipping concerns

[TheVapSter]

I ORDERD SATERDAY TOO AND IT WAS JUST TWO 510 SPARE PARTS KITS AND ALL MY ATTYS ARE DIED SO I AM IN A DO OR DIE STATE I AM ON THE EDGE OF GOING GET A PACK OF SMOKES IT BEEN 3 MONTHS I HOPE I CAN HANG ON!!!!! MARK SAID IT SHOULD GO OUT TOMORROW!! GLAD TO HEAR YALLS WENT OUT ORDER#860

 

[solonguniverse]

got my order today #671, only thing that sucks is i have a load of carts from my dietsmokes order with the original attys that dont really fit on the new ones. even the "new" carts from inno dont really fit as snug as they do in my other 510 attys. oh well, i know how to make them hold.

I know its probably annoying that adjustments need to be made as soon as you get your new atomizers, but I know one person said all it took was a slight squeeze with a pair of pliers and the atomizers worked perfectly with all his cartridges. Just start slow so you don't have to bend it back out.

 

[Burnie]

Received my order #698 yesterday. The new attys and carts do seem to work, but old carts just fall out. As I top most of the time this will work. If I had it to do over I would just order the regular attys. Don't really see a vapor increase in the new attys, and only time will tell how long they last.

Burnie

 

[Ryle]

Mine shipped Saturday and was hoping for it today before I went on my trip tomorrow morning. But now my trip is delayed until the mail comes. (3-3:30) If I wait for the mail and it still isn't there I'm gonna be very upset. I was supposed to get a tracking number and I have been checking it and no information. I told him right over the phone i want a tracking number and guess what? I called usps and they said it is just a confirmation number it isn't a tracking number. So I haven't got a clue where my package is now. Thanks Innovapor! You've done it again!

Mine was waiting on me when I got home from work yesterday.

 

[SantanzChild]

Processed through Sort Facility, July 27, 2009, 9:47 pm, BOISE, ID 83708
Electronic Shipping Info Received, July 21, 2009

what else can be said.

 

[Burnie]

Received my order #698 yesterday. The new attys and carts do seem to work, but old carts just fall out. As I top most of the time this will work. If I had it to do over I would just order the regular attys. Don't really see a vapor increase in the new attys, and only time will tell how long they last.

Burnie

UPDATE
After using all day, 3 batteries worth, I went back to another of my old 510 attys, I have lots , just as much vapor with the same liquid. Every time I top the new atty, it would still leak and I would need to wipe off the juice. Real PITB. I have an idea on tapering the end to work with my old carts, just need to find the right size cone to do it with. I am still going to find a use for them, but IMHO "I WOULD NOT ORDER THE NEW ATOMIZERS" again this is JMHO.

Burnie

 

[camidaddy]

UPDATE
After using all day, 3 batteries worth, I went back to another of my old 510 attys, I have lots , just as much vapor with the same liquid. Every time I top the new atty, it would still leak and I would need to wipe off the juice. Real PITB. I have an idea on tapering the end to work with my old carts, just need to find the right size cone to do it with. I am still going to find a use for them, but IMHO "I WOULD NOT ORDER THE NEW ATOMIZERS" again this is JMHO.

Burnie

I'm coming in at the end of this thread. When you say it leaks, where/how? My order from Inno was from 7/4 and received a week later. Mine leaks all the time and I thought I was using the old atomizer.

 

[solonguniverse]

I'm coming in at the end of this thread. When you say it leaks, where/how? My order from Inno was from 7/4 and received a week later. Mine leaks all the time and I thought I was using the old atomizer.

They all leak when you overfill them. I think most of the idea of leaking atomizers, however, comes from the new atomizers being about 0.12 mm larger than the old ones. Apparently old cartridges don't fit snugly and seal so they tend to leak. New atomizers are now being shipped with new cartridges that fit.

 

[IronEagle]

They all leak when you overfill them. I think most of the idea of leaking atomizers, however, comes from the new atomizers being about 0.12 mm larger than the old ones. Apparently old cartridges don't fit snugly and seal so they tend to leak. New atomizers are now being shipped with new cartridges that fit.

I was told today that the "new" carts are infact the very same ones we have been using all along. I guess the leaking issues happen when you use carts that have already been used on the old style atomizers. I do also believe overfilling doesnt help the matter any. Anyone have some brand new 510 carts care to confirm?

 

[solonguniverse]

I was told today that the "new" carts are infact the very same ones we have been using all along. I guess the leaking issues happen when you use carts that have already been used on the old style atomizers. I do also believe overfilling doesnt help the matter any. Anyone have some brand new 510 carts care to confirm?

I will in about 2 days.

 

[Burnie]

They all leak when you overfill them.

I am not overfilling them

New atomizers are now being shipped with new cartridges that fit.

NOT If you take ANY UNUSED cart it is the same fit, I tried. It is tighter than a used cart, but not like the older attys. And since I switched back to an older atty with an older cart, guess what, NO LEAKING.

Anyone have some brand new 510 carts care to confirm?

See above

The "New" carts are not "Designed" for this atty, they are just not compressed by the older atty, which is a hair smaller. I am going to compress the tip of the new atty's just so I can use them. IF you do not want problems, I would NOT order these new atty's. JMHO

By the way I have 5ea 510 kits, 10 full PV's + 20 extra atty's, my fav PV , so I feel I know how a 510 works. I ordered from Innovapor to test this NEW atty, NOT IMPRESSED

Burnie

 

[solonguniverse]

I am not overfilling them
NOT If you take ANY UNUSED cart it is the same fit, I tried. It is tighter than a used cart, but not like the older attys. And since I switched back to an older atty with an older cart, guess what, NO LEAKING.
See above

The "New" carts are not "Designed" for this atty, they are just not compressed by the older atty, which is a hair smaller. I am going to compress the tip of the new atty's just so I can use them. IF you do not want problems, I would NOT order these new atty's. JMHO

By the way I have 5ea 510 kits, 10 full PV's + 20 extra atty's, my fav PV , so I feel I know how a 510 works. I ordered from Innovapor to test this NEW atty, NOT IMPRESSED

Burnie

Then don't order the new ones again...easy. I don't have any yet, so I couldn't tell you one way or the other for sure. I'm not going to form an actual opinion without information. I'm just going on what I've read in the 60+ threads on the atomizers from HECK.

 

[Bigbob]

I am not overfilling them
NOT If you take ANY UNUSED cart it is the same fit, I tried. It is tighter than a used cart, but not like the older attys. And since I switched back to an older atty with an older cart, guess what, NO LEAKING.
See above

The "New" carts are not "Designed" for this atty, they are just not compressed by the older atty, which is a hair smaller. I am going to compress the tip of the new atty's just so I can use them. IF you do not want problems, I would NOT order these new atty's. JMHO

By the way I have 5ea 510 kits, 10 full PV's + 20 extra atty's, my fav PV , so I feel I know how a 510 works. I ordered from Innovapor to test this NEW atty, NOT IMPRESSED

Burnie

Burnie, where are your attys leaking from?

Also: there are 2 different styles of carts, I have both, on the old ones the top caps fit inside the atty, on the new ones there is a definite lip with a beveled edge.

just saying...

 

[IronEagle]

I am not overfilling them
NOT If you take ANY UNUSED cart it is the same fit, I tried. It is tighter than a used cart, but not like the older attys. And since I switched back to an older atty with an older cart, guess what, NO LEAKING.
See above

The "New" carts are not "Designed" for this atty, they are just not compressed by the older atty, which is a hair smaller. I am going to compress the tip of the new atty's just so I can use them. IF you do not want problems, I would NOT order these new atty's. JMHO

By the way I have 5ea 510 kits, 10 full PV's + 20 extra atty's, my fav PV , so I feel I know how a 510 works. I ordered from Innovapor to test this NEW atty, NOT IMPRESSED

Burnie

Burnie, I hope you didnt take what I posted to offense. Just explaining what I was told on the phone today. We all appreciate your knowlege on the subject. I actually called to switch my attys to the old style but alas my order FINALLY shipped after 13 days of waiting...figures dont it LOL!

Also anyone know what the double sort facility is all about? Stupid USPS =/


Detailed Results:

Processed through Sort Facility, July 28, 2009, 12:52 am, BOISE, ID 83708

Processed through Sort Facility, July 27, 2009, 9:48 pm, BOISE, ID 83708

Electronic Shipping Info Received, July 18, 2009

 

[bonez]

The orders are going out randomly. Mine was 606 no info, no receipt - double 501 kit.

 

[danehalls]

My name is Daniel Poponet and I bought this from you

Order Information - Order #856
QTY. PRODUCTS TOTAL
1 ea. 510 NO CHARGER KIT - Stock Up on 510 parts!
Atomizer Style - ALL BLACK NEW IMPROVED 30K BURN
Cartridge Flavor - Blank - None
Cartridge Strength - BLANK - NONE
3 ml ECOpure Flavor - GOLD - Regular Tobacco Flavor
3 ml ECOpure Strength - Medium (15mg/ml)
LED Color - LED BLUE
$40.00
1 ea. 510 Charger
510 USB Charger TYPE - USB SINGLE PIECE - FITS IN PELICAN CASE
$10.00
$50.00Sub-Total:
$5.00 Delivery Method (USPS Priority w/ Delivery Confirmation and Tracking):
-$5.00 Discount Coupon: ECR69 :
$50.00 Total:

all what I want is to know when is coming or if is coming? I live in uk.

 

[kellie]

Hi
my order number is 865 ordered on 7/24 just wondering when it will ship

 

[SantanzChild]

innovapor@gmail.com

You will have a much better chance of getting your questions or concerns answered.

 

[bonez]

No you won't I tried several times

 

[SantanzChild]

they always responded to me.