Is it common knowledge to use PG e-liquid only with eGO-T's?

[mtobey]

Did I miss something...Was told by a vendor that eGo-T's are made to work with PG e-liquid only...is this common knowledge?
It's not stated in their description of the product or warranty information!

 

[Cap.]

I've never heard that Mtobey. My Ego based devices all worked fine with all kinds of e-juice.

Welcome to the forum!

~Cap.

 

[mtobey]

Thanks Cap Have had 4 eGo-T type B 4 atomizers fail on me anywhere from an hour to 24 hours...that's a lot of bucks!

 

[Fiamma]

I've never had an ego fail in that length of time. Course we don't know how you draw on it, you can't hit it like a cigarette, we don't know if you have enough juice in it, etc.

Chinese do test all their atties with PG only and they use that as primer in them on the shelf and during shipment. You need to blow it out before putting juice in, or just tough it out and vape thru it.

I use 50/50 juice, always have, vaped only on Ego for a year. Your experience suggests that something is amiss in your method.

 

[mooreted]

The tank system doesn't like thick juices much. Several people use it with 50/50 PG/VG with success.

 

[Iusedtoanalog]

Hi Mtoby. It seems rightful to use a high or all PG liquid liquid in an eGo-T atty. When I was using the "t" atomizers I always found that more often than not they worked better with thinner liquids. They worked better when you vape them nearly vertical. They worked better when you draw on them lightly. But they always had something about them that was not quite right for me.

Keep in mind that I devoted the better part of six months to those attys and all variants that where available at that time. I even re-upped when the "c" system was introduced only to find the same thing that I didnt appreciate about the "t" to be present with the "new and improved" version. Aside from the fact that you can replace the coil in the "c" there has been no great improvement with the tank system(in my opinion)

Since you have a good battery set and also enjoy a blend with some or alot of VG why not look into some good quality cartomizers like boge or smoktek and chalk it up to a learning excercise? I would recommend somehting around 2 ohms in a cartomizer, with a single coil. Some vendors will give you some manner of warranty coverage but it looks like that ship may have sailed already... Good Luck. Happy Vaping.

 

[PermanentWaves]

I started with an ego-c and can confirm 50/50 worked with no problems for me.

 

[mtobey]

Thanks all for your input! Found a tip about pulling the battery button up and got the atomizers working again. Will be mindful to use 50/50 mix.

 

[MattB101]

You can always add a couple of drops of distilled water to thin it out a little if what your vaping is too thick. I happen to like the "huge cloud" of vapor I get with 50/50.