Is this safe?
- Thread starter DeathFox
- Start date
- th_trl_thread_readers 0
- Status
Can't help you with the clone question... but that battery can easily handle a .5 ohm coil.
I'm not familiar with that clone but as long as it's NOT a hybrid you should be fine. The pin protrudes out of the Arctic enough so it's safe on a mech . Just don't put it on any mech with a hybrid cap.
here is a pic of it broke down, i just wanna make sure its safe http://cdn.shopify.com/s/files/1/03...4d6b-820a-6472e803a900_large.jpg?v=1397758324
My phone is junk and isn't letting me view the pic. Look and see if there is just a hole where the battery actually touches the tank then it's a hybrid. If it's made with a piece between the battery and the 510 on the tank then it will be safe with the Arctic. Does that make sense? I'm sorry I'm having a difficult time trying to figure out how to best explain it
as long as the clone works as it's de
It should be fine. Do plenty of research on Chi-You on youtube. Even though it's a decent mod, there could be some minor problems with it. A bit of Loctite might be needed to keep some of the pins from unscrewing on their own, or you'll be taking it off to re-tighten it. Just make sure you get the conductive version of it.
It should be fine. Do plenty of research on Chi-You on youtube. Even though it's a decent mod, there could be some minor problems with it. A bit of Loctite might be needed to keep some of the pins from unscrewing on their own, or you'll be taking it off to re-tighten it. Just make sure you get the conductive version of it.
Gets my seal of approval, you should be all good as long as you're not draining your battery too low or something silly.
I've got to learn how to post links and stuff. I'm just not good with technology at all
To easily embed an image just get the image's url (it'll end in .jpg or .png or something) and type [img] then paste the URL and close it off with [/img]. Easy!
- Status
Similar threads
