Has anyone seen a cell phone type "skin" or wrap ect for the MVP? Even a walkie talkie? Ive been using a plain XL SS carto lately on mine and i think it would look hilarious. Kinda stealthy too if the cell phone wrap looked real.
iTaste MVP v2 Owners Group
- Thread starter KnurledNut
- Start date
- th_trl_thread_readers 0
- Status
have not seen a 'cell phone' skin - but
you could ask, or send a picture of what you want
and $22 bucks, and these guys claim they will make you one...
- Custom Design Wrap
good luck
you could ask, or send a picture of what you want
and $22 bucks, and these guys claim they will make you one...
- Custom Design Wrap
good luck
don't you just hate when you are on 'passthru'
and you try and use the screen buttons, but after (1) push
they de-activate... or is that just mine
and you try and use the screen buttons, but after (1) push
they de-activate... or is that just mine
Checking in as a new owner.
Local b&m doing them for $59 with any juice purchase. Not bad, got the kit, and a 15ml bottle for about 75. I can live with that. A little higher than online, but like most others I prefer supporting local business when the prices don't inspire instant buyers remorse.
Anyway, loving it so far. This thread definitely helped to push me towards the MVP, so thank you to you all for the good advice, and recommendation.
Local b&m doing them for $59 with any juice purchase. Not bad, got the kit, and a 15ml bottle for about 75. I can live with that. A little higher than online, but like most others I prefer supporting local business when the prices don't inspire instant buyers remorse.
Anyway, loving it so far. This thread definitely helped to push me towards the MVP, so thank you to you all for the good advice, and recommendation.
Every juice and every device is a little different but... I have been running 50/50 through a 30 for a while now. I vape it around 4.3V on my V1. Run it at anything bellow that and it floods or flows poorly.
Of course, your millage may vary
don't you just hate when you are on 'passthru'
and you try and use the screen buttons, but after (1) push
they de-activate... or is that just mine
Apparently this happens with all the devices. Unfortunately
Cleaning the soldiers tonight...
eyes right PAaaaRADE REST !.......................................................................
NO!!!yeah, very nice
What, did it already bag its first deer ??
The deer was vaping with it......
Then that damn hunter came along....and......
"Oh, DEER!!!!"
KnurledNut
Sorry for the off topic but what are the 6 (green thru blue clearos) on the right side on the bottom picture? They looks kinda like a T3S but with a removable drip tip? They look a tiny bit like a Vapeonly miny but appear to be larger?
Thanks.
Sorry for the off topic but what are the 6 (green thru blue clearos) on the right side on the bottom picture? They looks kinda like a T3S but with a removable drip tip? They look a tiny bit like a Vapeonly miny but appear to be larger?
Thanks.
Last edited:
don't you just hate when you are on 'passthru'
and you try and use the screen buttons, but after (1) push
they de-activate... or is that just mine
I noticed that on mine yesterday, luckily I found just about everything tastes fine at 8.5W so I didn't worry about it.
^ so organized!
Doesn't everyone organize their stuff when cleaning it?
The new Tapatalk update blows... that is all now Free
Those are T4's from FT. These were the tanks that I first started with after my beginner iSmoka kit. Then I got some I-16's. Now I'm waiting on some Evod's. My cigarette addiction was replaced with a vape gear addiction. No worries though, it's still better.
Thank you
I found them with some searching. I actually like the T3S on my MVP better than most of the cheaper options. A removable drip tip though would be nice.
I really liked the iClear30 (although the draw is tight) that came with both my MVPs but i got two iClear16s to test and hated them. I even tried the i30 wick and it still is like trying to suck ice cream through a straw. Stock i16 wicks/coils had dry hits with 70PG/30VG, 60/40 and 50/50 no matter how low/high i set the MVPs. I even checked to make sure the white cone that covers the wicks is on correctly and not choking the wicks.
The iClear30 wicks are much better in the Iclear16 but it is still way too tight of a draw for me. I even tried them without being on the MVP and i got the same results. Occasionally i find the problem is in poor machining of the vent holes in the eGo collar and i open them up. Sometimes a 510-eGo adapter solves the problem too.
Ive got a small drill bit and plan on opening up the hole in the "white cone" that covers the wicks. IMO this is why the draw is so tight on the i16/i30 coils but i may be wrong. Ive got a spare from a dead coil to test my theory.
Thanks again for your response
I found them with some searching. I actually like the T3S on my MVP better than most of the cheaper options. A removable drip tip though would be nice.
I really liked the iClear30 (although the draw is tight) that came with both my MVPs but i got two iClear16s to test and hated them. I even tried the i30 wick and it still is like trying to suck ice cream through a straw. Stock i16 wicks/coils had dry hits with 70PG/30VG, 60/40 and 50/50 no matter how low/high i set the MVPs. I even checked to make sure the white cone that covers the wicks is on correctly and not choking the wicks.
The iClear30 wicks are much better in the Iclear16 but it is still way too tight of a draw for me. I even tried them without being on the MVP and i got the same results. Occasionally i find the problem is in poor machining of the vent holes in the eGo collar and i open them up. Sometimes a 510-eGo adapter solves the problem too.
Ive got a small drill bit and plan on opening up the hole in the "white cone" that covers the wicks. IMO this is why the draw is so tight on the i16/i30 coils but i may be wrong. Ive got a spare from a dead coil to test my theory.
Thanks again for your response
- Status
Similar threads
