iTaste MVP v2 Owners Group

[pufZeppelin]

Just got me and the wife the MPV2s yesterday and loving them. Have been vaping for a week now so still getting my feet wet on the ins and outs of it all lol.
Any suggestions on some good tanks to use on these have been using the i16s that came with it and having no issues with them but have read that a lot of juices can only be used in glass tanks. Yes im a complete newbie still. Not looking for some huge sized tanks probably nothing bigger than 2.5ml I think any suggestions would be great.
Thanks in advance

hello Cloud9Vaps, welcome to MVP wonderland
glad you made such a good choice...

 

[pufZeppelin]

just a refresher on some of the cases for the MVP

- Steampunk Custom iTaste MVP Distressed Leather by SillyNilly

Innokin iTaste Leather Holster- for less than $20, these are really nice, well made holster leather
- Innokin Leather Holster for VTR / MVP
- Innokin iTaste Leather Holster
- Innokin iTaste MVP and VTR Leather case
- Innokin iTaste MVP/VTR Leather Carrying Pouch - MyFreedomSmokes.com

wow, milestone Post #5000​

 

[papajeep]

As stated the aspire has its on beauty ring. The base is about an inch wide, probably at least an 1/8 -3/16 bigger than the pt2. It's about 3/4 of an inch shorter than my MVP. Just for comparison.

sent via smoke signals

 

[pufZeppelin]

As stated the aspire has its on beauty ring. The base is about an inch wide, probably at least an 1/8 -3/16 bigger than the pt2. It's about 3/4 of an inch shorter than my MVP. Just for comparison.

how about a picture of Nautilus , on MVP with the with its own beauty ring to compare...

 

[Garemlin]

just a refresher on some of the cases for the MVP

- Steampunk Custom iTaste MVP Distressed Leather by SillyNilly

Innokin iTaste Leather Holster- for less than $20, these are really nice, well made holster leather
- Innokin Leather Holster for VTR / MVP
- Innokin iTaste Leather Holster
- Innokin iTaste MVP and VTR Leather case
- Innokin iTaste MVP/VTR Leather Carrying Pouch - MyFreedomSmokes.com

I dig those leather cases. Wish there was a bigger selection. Just don't think I could see myself wearing that holster though.

And I'm really surprised no one has designed a basic neoprene slip on protective sleeve.

 

[pufZeppelin]

Just got me and the wife the MPV2s yesterday and loving them.
Have been vaping for a week now so still getting my feet wet on the ins and outs of it all lol.

Any suggestions on some good tanks to use on these

have been using the i16s that came with it and having no issues with them but
have read that a lot of juices can only be used in glass tanks.
Yes im a complete newbie still.
Not looking for some huge sized tanks probably nothing bigger than 2.5ml
I think any suggestions would be great.
Thanks in advance

myself I don't have any luck with the i16 or i30

on the other hand, I have great luck and very pleased with the vivi nova...
- Smoke Evolution | Vaporizers, Clearomizers, eLiquid and more!

also the EVODs and T3S work very nice, simple and cheap...

- Kanger Evod Rebuildable Clearomizer - Mt Baker Vapor - Electronic Cigarettes
- Kanger T3S Clearomizers - Mt Baker Vapor - Electronic Cigarettes
- Kanger MT3s

there are some juices that will chemical react with plastic and melt the tank
most call these juices "Tank Crackers" -- most or a lot of vendors will state this fact when purchasing...

search around MBV's site for way cheap juice and other good deals...
good luck

 

[papajeep]

how about a picture of Nautilus , on MVP with the with its own beauty ring to compare...

I'm out and about right now. I'll do that when I get back home.

sent via smoke signals

 

[clnire]

Innokin makes a MVP with replaceable battery, I think it is called the vtr. I would like to have a + & - button, like the itaste v3, so that you don't have to always round robin. Maybe an adjustable connector pin.

YES! That's pretty much it for me.

 

[pufZeppelin]

I dig those leather cases. Wish there was a bigger selection. Just don't think I could see myself wearing that holster though.

And I'm really surprised no one has designed a basic neoprene slip on protective sleeve.

Vapor Lady has these on site (for comparison)
- iTaste VTR Variable Voltage/Variable Wattage Starter Kit iClear30

I've seen MVP leather before, but must be out now (I don't see any at this time)

 

[papajeep]

As requested , comparison photos. I did notice that the aspire with the MVP ring had to be ran down further to tighten the ring to tank. In the photo its not tight & I don't want to push my center pin down.

sent via smoke signals

 

[pufZeppelin]

As requested , comparison photos.

I did notice that the aspire with the MVP ring had to be ran down further to tighten the ring to tank.

In the photo its not tight & I don't want to push my center pin down.

well because that's not the proper procedure
reguardless of popular belief the "Beauty Ring" is REALLY a SUPPORT ring...

yes it looks good and hides the threads and transitions the lines of the
tank to the mod, the true reason is to provide support of a large tank beyond the small 510 thread post...

-thread support ring on fully, then attach 510 topper (just snug)
-then thread the support ring back UP to make contact with tank, thus providing support...

the topper tank should always be tightened the same --
regardless of which ring used, or with NO ring being used...

I think this confusion is why so many people have trouble over tightening
a 510 threaded device leading to pushing the battery contact in too far...

 

[PaulBHC]

That makes way too much sense.

 

[papajeep]

well because that's not the proper procedure
reguardless of popular belief the "Beauty Ring" is REALLY a SUPPORT ring...

yes it looks good and hides the threads and transitions the lines of the
tank to the mod, the true reason is to provide support of a large tank beyond the small 510 thread post...

-thread support ring on fully, then attach 510 topper (just snug)
-then thread the support ring back UP to make contact with tank, thus providing support...

the topper tank should always be tightened the same --
regardless of which ring used, or with NO ring being used...

I think this confusion is why so many people have trouble over tightening
a 510 threaded device leading to pushing the battery contact in too far...

Understood, what I meant to say was once the tank was tight the ring had to come up higher than the MVP threads went to tighten to the tank. I hope that makes sense. ??

sent via smoke signals

 

[pufZeppelin]

As requested , comparison photos. I did notice that the aspire with the MVP ring had to be ran down further to tighten the ring to tank.

In the photo its not tight & I don't want to push my center pin down.

Understood, what I meant to say was once
the tank was tight the ring had to come up higher than the MVP threads went to tighten to the tank. I hope that makes sense. ??

ok, just when you said "don't want to push my center pin down" made me wonder...

- - - -

and thanks for the compare photos...

I do like the straight sided better than the tapered or flared with that big tank

 

[papajeep]

I was talking about the center pin on the MVP. If center pin is the

correct term. On the Nautilus it looks smooth where it usually has a hole for air flow because air flow is on the base of the Nautilus.

sent via smoke signals

 

[pufZeppelin]

yea makes no difference due to the fact the base is enclosed or sealed
because air flow is drawn from adj ports on side...

you should just screw Nautilus (or any 510 tank) just snug enuff to make
contact with battery post, then draw ring UP to it...

if that is not possible, then ring is to tall (improper fit)

 

[1wildman]

The russian 91 is a great tank. Much more consistent than the nautilus. Wish they had that unpolished stainless finish for the MVP to match the russian 91.


Sent from my iPad using Tapatalk

 

[CalamityJess]

Great, I just bought a leather case for an mvp yet I don't have one I want to cover up because they're Shine editions. Dammit.

 

[pufZeppelin]

The russian 91 is a great tank. Much more consistent than the nautilus. Wish they had that unpolished stainless finish for the MVP to match the russian 91.


Sent from my iPad using Tapatalk

that russian 91% has caught my fancy, might have to breakdown and get one...

the one called Rugged Steel isn't close ? did you ever compare ?

 

[1wildman]

The russian 91 is a quality clone of the kayfun. I hear the kayfun is the best. Other clones are hit or miss but why take a chance? It's a pretty big investment but the quality is top notch and it vapes great.

Edit - no direct expierce with other clones. Have heard ehpro and hCigar are ok.


Sent from my iPad using Tapatalk