iTaste MVP v2 Owners Group

[Agnes Black]

It was a hard choice between the steampunk one and the fleur de lis -- but both are super cuuuuute

 

[Agnes Black]

The fleur de LIS with the charms is such an awesome case <3

 

[InfernoOrangeSS]

Hmm.. did you store or let it get upside down for long? Ive had it happen if it was upside down for long but it was minimal & only happened when upside down..

That's possible. While I was holding it, I may have had it tilted to the side so it was in effect sideways in my hand. Not long, just in between Vapes.

 

[therussellv]

Quick question from a newbie to the MVP2...
I noticed tonight while vaping that I was getting a lot of flavor on my lips as I vaped. I didn't see where it could be leaking anywhere, but it seemed like some juice was on the mouthpiece on the outside. Is this just the MVP2 giving off superior flavor/taste to my EVOD, or should I be concerned?
Any help would be welcomed. (I use a 16B topper on mine. It came with the starter set. My juice is Want2Vape's Mystical Menthol.)

Could just be condensation, happens to me all the time. Builds up in my moustache too.

Last stinky October 15, 2013

 

[InfernoOrangeSS]

Could just be condensation, happens to me all the time. Builds up in my moustache too.

Last stinky October 15, 2013

I hadn't thought about that. It is cold out. At least enough to cause condensation. My EVOD would have droplets inside the mouthpiece. With the MVP2 making much more vapor, it's possible I am getting enough condensation to cause my problem. Thank you!

 

[DarkDays93]

Got my problems sorted. It was just a case of fiddling with the pin a little bit. It's now swapping between tanks seamlessly and no issues so far.

Love my purchase again.

Thanks for all the help

 

[VapieDan]

Got my problems sorted. It was just a case of fiddling with the pin a little bit. It's now swapping between tanks seamlessly and no issues so far.

Love my purchase again.

Thanks for all the help

Good job. Worked for me too!

 

[Heisenberg0914]

Got my problems sorted. It was just a case of fiddling with the pin a little bit. It's now swapping between tanks seamlessly and no issues so far.

Love my purchase again.

Thanks for all the help

What did you use to life up the pin ? I tried one of those eye glass mini flat head screw drivers and couldn't get it done.

 

[VapieDan]

I have the mini screwdriver set. A number of the individual bits are very tiny and long enough to get in there. Good for doing things like pushing wicks in RBAs as well.

 

[clnire]

I got a simple mini screwdriver set at a dollar store. Great for this kind of little fixes and for wrapping coils.

 

[Heisenberg0914]

The mini flat head I have is TINY ! I can get it down the side of the pin but I can't lift it because its up against the sidewall so its keeping me from getting under it.

 

[VapieDan]

The mini flat head I have is TINY ! I can get it down the side of the pin but I can't lift it because its up against the sidewall so its keeping me from getting under it.

You do have to use some pressure against the outside of the 510 connection. I just tried it and it works fine. Go around the pin like a clock a little at 12,3,6,9. Don't try to pull it up in one big pull.

 

[Dominique Hoogduin]

Been a week now w the mvp2. Its gotta be one of the coolest devices ive ever owned.. especially at the price I got it for (50 $ shipped).

Smoked analogs and vaped through the weekend. . On monday I said thats enough of the analogs.. so its been 100 percent vaping since then.

Amazing vapor production. . And the battery is top notch...the first time I had to charge it was monday.. & I attributed it to not using it as much.. but I have been using exclusively since monday & the yellow light JUST came on a little bit ago...

Thats half a day monday.. all day tues weds & today! Thats effing amazing. 3.5 days of heavy vaping (granted I vape at the lower end of most juices bc the throat hit is great & im blowing plumes of vapor).

Could not recommend this mod enough...

Thought the size/shape might be an issue.. but it fits so comfortably in my hand... although ive pondered if the power button might be more ergonomic on the side vs where it is.. but meh.. ima huge knitpicker & thats the best I can come up w/

do u thumb joint the button? found that the most ergonomic way to use it.. just grip it and use the thumb joint

 

[Dominique Hoogduin]

The mini flat head I have is TINY ! I can get it down the side of the pin but I can't lift it because its up against the sidewall so its keeping me from getting under it.

seems some tweezer work well too.. had to adjust it a bit after it stopped working with my new kanger evod's v2. Not much force needed also.

 

[clnire]

Per Knurlednut's info,I got some free 3M samples and wrapped my VV3s! I have jwraps for my 2 MVPs, but this sure was cheaper!

 

[VapieDan]

Per Knurlednut's info,I got some free 3M samples and wrapped my VV3s! I have jwraps for my 2 MVPs, but this sure was cheaper!

View attachment 312881

Where did you get samples?

 

[DarkDays93]

What did you use to life up the pin ? I tried one of those eye glass mini flat head screw drivers and couldn't get it done.

Heisenberg0914, I just used a pair of tweezers. I couldn't get both prongs in there to try and lift it so just used one of them to shuffle it up a little bit.

Let me know how you get on

 

[PaulBHC]

If anyone cares about my saga, my MVP won't charge. I wish it would through the 510 but it doesn't.

My local shop said that Innokin is real good at replacing defects and try contacting them. I went to the support page and in part it says

If you purchased your Innokin product from an Authorized Innokin Vendor within the last 3 months please contact them directly for information about the Authorized Innokin 3 month Warranty plan.

Something to think about as we all try to find the best price. Most online stores have a DOA return and maybe a 30 day. In addition to wondering if the unit is real, we should check the vendor to see if they are an authorized dealer.

I bought an ego-c twist yesterday as I ponder weather to buy another MVP. I've tossed $40 in a slot machine at times and always bought those $40 cartons of smokes that lasted a week. So why do I feel bad that this lasted a month?

 

[clnire]

Check post 4867 from KnurledNut for full instructions. www.3MArchitecturalMarkets.com you want the DI-NOC samples. They have like 500 patterns/colors. You can select up to 5 samples (not every pattern is available as a sample) . They sent them free. I said I was doing a small remodeling project for property I own (true, but "property" is my VV3s LOL). Made a pattern for my VV3s and so easy to do! I do leatherwork so my egos are all wrapped with leather but this was easy to work with, will protect them and looks great! And I can change them (not reuse) if I want. Can't beat free wraps!

 

[DarkDays93]

If anyone cares about my saga, my MVP won't charge. I wish it would through the 510 but it doesn't.

My local shop said that Innokin is real good at replacing defects and try contacting them. I went to the support page and in part it says

Something to think about as we all try to find the best price. Most online stores have a DOA return and maybe a 30 day. In addition to wondering if the unit is real, we should check the vendor to see if they are an authorized dealer.

I bought an ego-c twist yesterday as I ponder weather to buy another MVP. I've tossed $40 in a slot machine at times and always bought those $40 cartons of smokes that lasted a week. So why do I feel bad that this lasted a month?

What happens when you try and charge? Any lights or anything? No response?