iTaste MVP v2 Owners Group

[Katya]

And in unrelated news--here we go!

CASAA: First Call to Action for FDA Proposed Regulations - Consumer Request for an Extension of Comment Period

 

[Maytwin]

Yaaay, my MVP2 arrived today ...... but I can't have it for another 12 days

 

[paulkok_my]

Yaaay, my MVP2 arrived today ...... but I can't have it for another 12 days

Why? Stuck in customs?

Sent from my GT-I9300 using Tapatalk

 

[Maytwin]

Why? Stuck in customs?

Sent from my GT-I9300 using Tapatalk

No, it's here in my house but it's a present for 12 days time

 

[paulkok_my]

No, it's here in my house but it's a present for 12 days time

Cool. So near and yet so far.

Sent from my GT-I9300 using Tapatalk

 

[Maytwin]

Cool. So near and yet so far.

Sent from my GT-I9300 using Tapatalk

Indeed - my husband who bought it for me is going to be away for a couple of days - will I be able to keep my hands off it ..... ?

 

[Stringplucker]

hey now, that's a darn cool looking wrap !
maybe one of these fancy doo-dadds would look good...

- $3.03 GS-H5LED Bottom Coil Clearomizer (3.0ml) - blue / 2.4ohm at FastTech - Worldwide Free Shipping

- $4.79 V2 Round Mouth Clearomizer (2.5mL) - 2.6-2.8ohm / replaceable coil head / blue at FastTech - Worldwide Free Shipping

Thanks! I'm not sure I like the LED style, but I may purchase one for fun. I wonder if they make it with red, white and blue lights that flash...that would be cool for the 4th of July celebrations.

 

[pufZeppelin]

Thanks! I'm not sure I like the LED style, but I may purchase one for fun.
I wonder if they make it with red, white and blue lights that flash...that would be cool for the 4th of July celebrations.

haha I "searched" for red, wht, blu and found nothing...


but on the serious, you have seen the nice EVOD, MT3S colors ?
they are very rich colors and would look great with your new wrap... !
(assuming you're into bcc single)

- Kanger MT3 Rebuildable Clearomizer - Purple
- Kanger MT3 Rebuildable Clearomizer - Blue
- $15.39 MT3S BCC Bottom Coil Clearomizers (5-Pack / 3.0mL) 5-pack - yellow / 2.2-2.6ohm at FastTech - Worldwide Free Shipping
- $15.39 MT3S BCC Bottom Coil Clearomizers (5-Pack / 3.0mL) 5-pack - red / 2.2-2.6ohm at FastTech - Worldwide Free Shipping

- $13.04 EVOD Electronic Cigarettes Round Mouth Atomizer (1.5mL) 7-pack - 2.6

 

[herb]

I heard someone mention in another thread that there was another mod that has been on the market and the only real difference is this mod is like a supercharged MVP . No , it's not a hana modz or Hana clone. Wish I could remember the name.

On another note , if Innokin comes out with an MVP III this forum will be split because the MVP III needs it's own forum , I hope we don't need to engage in a battle to the death using prehistoric weaponry to determine which MVP reigns supreme .

 

[herb]

...battery longevity {MVP & VV V3}


I try not to EVER let mine get to Yellow
and I try not to squeeze that last Full bit of charge into it
closer to yellow (or even Red, heaven forbid) longer it takes to charge...
- - -
from Battery University
Li-Ion does not need to be fully charged, nor is it desirable to do so...
in fact, it is better not to fully charge, because high voltage stresses the battery
every reduction of 0.10v% (charging) is said to double life cycle of battery
-charging the li-ion cell to 4.2v expect 300-500 discharge cycles
-charging the li-ion cell to 4.1v expect 600-1000 discharge cycles

so, charging the battery to 4.1v (not full 4.2v) will double the life of your battery ¿
- - -
if I can, I charge mine -- guess the range is around 3.8v-4.1v
I run mine like an old lawn mower and I am at 9 months ownership mark
and as far as I can tell, it looks and performs just as the day I got it...

Vape≈hard / Vape≈true

I was confused at first about this but I think I get it now , so the key is to put it on the charger and periodically check by pushing both buttons at once and when it say's 4.1v take it off and use it until it reaches around 3.8 which will give you the best longevity ?

 

[thebza451]

i finally got my kayfun 3.1 clone and my maraxus mod clone!



it looks killer (literally, it looks like a klingon war blade or something)...

but you kayfun believers are right... "welcome to flavor country" indeed!

i built my first coil with 28g kanthar a1 around a 3/32 drill bit... about 9 wraps. came out to 1.69 ohms... then i wicked with cotton...

BOOM. suddenly i'm hitting this thing, the flavor is intense, fat storm clouds are flying around the room.. amazing.

i am a KAYFUN beliver for sure! ordering a KFL+ clone today i think... just too awesome! makes my aerotank seem weak and tasteless in comparison!

 

[CountBoredom]

I was confused at first about this but I think I get it now , so the key is to put it on the charger and periodically check by pushing both buttons at once and when it say's 4.1v take it off and use it until it reaches around 3.8 which will give you the best longevity ?

Isn't it funny that we're trying to eek out the most use from a $40 device when we used to drop more than that a week on a carton of cigs? Just sayin'... (FWIW, I am enjoying the conversation about device longevity because I, too, want to keep my little box alive as long as I can.)

 

[herb]

Isn't it funny that we're trying to eek out the most use from a $40 device when we used to drop more than that a week on a carton of cigs? Just sayin'... (FWIW, I am enjoying the conversation about device longevity because I, too, want to keep my little box alive as long as I can.)

Anybody who has an MVP that is a year old or longer and it still works like the day they bought it makes me pay attention to what they have to say.

Vaping devices are a critical component to everyday living for most of us , I for one don't feel like dealing with one that's on life support where it can expire at any time .

I like to know the why's and how's of things and when I see an expired MVP in the obituaries (especially one that dies prematurely) I like to pay my respects and then read the autopsy results.

When gary said it also depends on luck and you may get a dud, well , myself and Mr. luck don't get along too well , I have lottery results to prove it lol.

 

[Stringplucker]

i finally got my kayfun 3.1 clone and my maraxus mod clone!

it looks killer (literally, it looks like a klingon war blade or something)...

but you kayfun believers are right... "welcome to flavor country" indeed!

i built my first coil with 28g kanthar a1 around a 3/32 drill bit... about 9 wraps. came out to 1.69 ohms... then i wicked with cotton...

BOOM. suddenly i'm hitting this thing, the flavor is intense, fat storm clouds are flying around the room.. amazing.

i am a KAYFUN beliver for sure! ordering a KFL+ clone today i think... just too awesome! makes my aerotank seem weak and tasteless in comparison!

I've been studying them, and am about ready to take the plunge on one. I've quit smoking using the clearos, but am on the search for something...just not sure what yet. Perhaps it's warmer, stronger flavors that the Kayfun is known for...I hope to find out soon.

 

[sushigirl]

- $4.79 V2 Round Mouth Clearomizer (2.5mL) - 2.6-2.8ohm / replaceable coil head / blue at FastTech - Worldwide Free Shipping

I am embarrassed to admit this...but I've been searching and searching for those (even searched FT). I bought a couple in a clearance bin for $2 when I first started vaping and really like them (they take a Kanger replacement head). I went back and bought all they had...3. I wanted to stock up, but haven't been able to find them. I like to keep the cheapos around because I usually have at least 6 flavors going at all times and don't mind using them with tank crackers and can give them to noobs. I refuse to pay $4.79 from FT, but at least I know what they're called now - thanks puf!!! Still can't find any cheaper though


ETA: have all you Kayfundians seen the 10ml Kayfun Lite?

 

[herb]

I am embarrassed to admit this...but I've been searching and searching for those (even searched FT). I bought a couple in a clearance bin for $2 when I first started vaping and really like them (they take a Kanger replacement head). I went back and bought all they had...3. I wanted to stock up, but haven't been able to find them. I like to keep the cheapos around because I usually have at least 6 flavors going at all times and don't mind using them with tank crackers and can give them to noobs. I refuse to pay $4.79 from FT, but at least I know what they're called now - thanks puf!!! Still can't find any cheaper though


ETA: have all you Kayfundians seen the 10ml Kayfun Lite? View attachment 334966

Oh wow, i don't know if i should thank you or curse you lol, i clicked on your link to Vapor Joe's and (so much for willpower , mine went right down the tubes) great deals and descriptions , i thank you, my wallet feels otherwise.

 

[gerrymi]

yes , jeez ! ECF got all wonker'd- what like 2-3 months ago - (maybe longer)
and it still has not recovered, then the last couple days it's been like trying to ride your bicycle in the sand on the beach...

Perhaps...if more of us became ECF "Supporting Members"...(I mean we're talking only $2 a month)...there would be less wonkiness, shut-down snafus, technical glitches, etc.???

http://www.e-cigarette-forum.com/forum/payments.php

you have seen the nice EVOD, MT3S colors ?
they are very rich colors and would look great with your new wrap... !
(assuming you're into bcc single)
- $15.39 MT3S BCC Bottom Coil Clearomizers (5-Pack / 3.0mL) 5-pack - yellow / 2.2-2.6ohm at FastTech - Worldwide Free Shipping
- $15.39 MT3S BCC Bottom Coil Clearomizers (5-Pack / 3.0mL) 5-pack - red / 2.2-2.6ohm at FastTech - Worldwide Free Shipping

Does the MT3S use the same heads as the T3S?

Does the "surrounding" metal on the MT3S make it safe to use with tank-cracking jooses?

I heard someone mention in another thread that there was another mod that has been on the market and the only real difference is this mod is like a supercharged MVP . No , it's not a Hana Modz or Hana clone. Wish I could remember the name.

This one?

$59.45 E-LVT Variable Voltage/Wattage APV Mod - 3-6V / 3-15W / power bank / LED flashlight / water resistant / anti-shock at FastTech - Worldwide Free Shipping

 

[pufZeppelin]

Does the MT3S use the same heads as the T3S?
Does the "surrounding" metal on the MT3S make it safe to use with tank-cracking jooses?

yes, the kanger MT3S / T3S heads are unique & the same
my experience, they fit in all kanger bcc (single) and therefore was the reason
it was all I bought, and have an ample supply... (for rebuilding)

mini T3S, EVOD, T3S, MT3S are all polycarbonate (plastic) tanks
don't believe the metal jacket has any benefit other than
weight and restricted view and that's why I prefer the mini T3S and big T3S

- Kanger mini T3S clearomizer

- Kanger T3S clearomizer

 

[Keirster]

i finally got my kayfun 3.1 clone and my maraxus mod clone!

View attachment 334945

it looks killer (literally, it looks like a klingon war blade or something)...

but you kayfun believers are right... "welcome to flavor country" indeed!

i built my first coil with 28g kanthar a1 around a 3/32 drill bit... about 9 wraps. came out to 1.69 ohms... then i wicked with cotton...

BOOM. suddenly i'm hitting this thing, the flavor is intense, fat storm clouds are flying around the room.. amazing.

i am a KAYFUN beliver for sure! ordering a KFL+ clone today i think... just too awesome! makes my aerotank seem weak and tasteless in comparison!

That is Very Sharp BZA! I have been looking at the Maraxus for a while. It is very futuristic looking.

The Kayfun is a gamechanger for sure. Outside of drippers, it is all I use. Tried my PT mini last night on my VV3 ( for a change of pace and stealth look ) was not happy with the flavor or vapor production, the Kayfun has ruined them for me.

I am getting more into mechs now and have a few things coming from FT. I may have to move that one up in my que

Still use my MVP every single day and prefer my Kayfun on it vs. a mech, I can dial in the flavor better to my liking YMMV.

Great look bro!

 

[pufZeppelin]

I am embarrassed to admit this...but I've been searching and searching for those (even searched FT).
I bought a couple in a clearance bin for $2 when I first started vaping and really like them (they take a Kanger replacement head). I went back and bought all they had...3. I wanted to stock up, but haven't been able to find them.
I like to keep the cheapos around because I usually have at least 6 flavors going at all times
and don't mind using them with tank crackers and can give them to noobs. I refuse to pay $4.79 from FT, but at least I know what they're called now - thanks puf!!!
Still can't find any cheaper though

I'm into "if cheap works" too ! !

when I seen these , oh so long ago, I wanted them but just
procrastinated for so long
- DV BCC Clearomizer
- Smoktech ARO, Nova, Tumbler, RBC
- RBC Clearomizers

I've since bought SMOK RBC & EBC and love them
cheap, functional - I'm using an RBC now with a cotton kanger bcc in it
you can find them around for 2.49 & 2.95...