these were $29 now $25 (sorta a stateside FT)
- Kayfun Mini V2.1 Rebuildable Atomizer Clone By IVOGO
the guy in the review is a good watch
iTaste MVP v2 Owners Group
- Thread starter KnurledNut
- Start date
- th_trl_thread_readers 0
- Status
these were $29 now $25 (sorta a stateside FT)
- Kayfun Mini V2.1 Rebuildable Atomizer Clone By IVOGO
the guy in the review is a good watch
hey, welcome to ECF and the awesome MVP club
heres a couple to look at (some as mentioned)
- Innokin iTaste MVP Di Cut Vinyl Skins
- S25
- Itazte MVP Vapor Skinz
vape≈Happy
A cool fire flower one.. Wrap 4 Innokin Itaste MVP 2 0 Energy Vapor Skin Decal Sticker Electronic F Blaze | eBay
Here's the link: https://www.fasttech.com/products/1692100
Also got the replaceable tank sections: https://www.fasttech.com/products/1644300
What is a circuit board space? where can I get them? And to use it? I've had issues with the mvp and a vamo 5 mukey that just won't connect with some of my tanks drives me nuts. on the vamo I can only use an iClear 30 or aspire nautilus. no other tank rda rba clearomizer and etc.. will connect always get a screen with check atomizer on the vamo. the mvp is not so bad only have it happen on a couple different aspire bcc tanks and a kanger mt3 or t3d I think it's called.well I sized my insulators up and they are identical
just dont push them in to far & and same with center pin
biggest deal for me is they Slip In waaaay easier
just the slang all the cool kids call them flavor wicks
I consider them storage and isolators and no secret
I just only use yarn twist it up and thread it into coil
then lay what I think will work over top so no shorts
(I've even let one side very long and just folded it back over and click chimney on)
lot of heavy thick wick for thin juices and a topper with good draw;
thick juice and/or tight draw, just enuff wick to protect
bonus material:
have one of those circuit board spacers in my MVP (2-3weeks)
what a big diff all my toppers that required a little xtra love to connect
no longer require any at all great idea - them those are...
Proudly Vaping Cherry, Gummy Bear, & Pina Colada. kids flavors my lily white .... mr senator.
- Dec 18, 2013
- 2,946
- 56,640
- 80
yes, very frustrating
but no more with these stupid simple things, and pretty cheep
- Circuit Board Spacer
Buy a few of them as I have lost a couple. They work like a charm, I have one in my MVP and my VV3. There is an o-ring fix for the pin on the MVP, but I am too chicken to attempt it.
If you see a post from Capt. Shay, look at his blog and he has one for the MVP pin fix, with multiple ways to do it, including the spacer.
Good luck and keep us posted.
Looks like I am not getting my kfl mini clone from Fasttech. Shows out of stock now. I started a ticket and got a reply this morning. They don't know when they will get more. I might cancel and spring for the higher priced one but not sure.
pardon the typos, on my phone
Bummer, I have the $31 one in the air right now as my first trip to Kayfundland. I think it is worth the extra $/
It was off for a while but now back on. Really hard to beat this deal and I don't even like the Vamo
Not a source for a butterfly but since it hasn't been posted in a while, check my blog for free DIY wrap materials and template.
Check my blog for the full set of options for correcting the MVP/VV contact pin problem that includes gary and others rcomendations, illistrations and video.
Welocome to all the new members to our ranks!
Here's your sign:
Looks like I am not getting my kfl mini clone from Fasttech. Shows out of stock now. I started a ticket and got a reply this morning. They don't know when they will get more. I might cancel and spring for the higher priced one but not sure.
pardon the typos, on my phone
what a bummer, i guess i just got lucky then yet i did order mine on the 8th so it's been a good wait so far, seem them at Angel Cigs USA Warehouse for 25 bucks.
Last edited:
Will do thanks.Bummer, I have the $31 one in the air right now as my first trip to Kayfundland. I think it is worth the extra $/
It was off for a while but now back on. Really hard to beat this deal and I don't even like the Vamo
Not a source for a butterfly but since it hasn't been posted in a while, check my blog for free DIY wrap materials and template.
Check my blog for the full set of options for correcting the MVP/VV contact pin problem that includes gary and others rcomendations, illistrations and video.
Welocome to all the new members to our ranks!
Here's your sign:
Proudly Vaping Cherry, Gummy Bear, & Pina Colada. kids flavors my lily white .... mr senator.
Yeah....uhmmm....(sheepishly raises hand)....uh guilty here. Did the O-ring fix on my MVP2 and my VV. Then tried it on my MVP1 and the pin started to stick so I pulled too hard and POP. I was able to break it down and re-solder the wire to the pin though......
So....now you can say you have heard of one case of it happening, but it was some dunbass that was being impatient and not taking his time.
@ Veriform... How did you get the top to slide out? Mine is stuck on the fire button...?
NM.. got it off... broke the red LED though
Damn, sorry. You have to push the firing button in and then it will slide out. That's on an MVP1. I've never broken down an MVP2.
The MVP 2 doesnt do that.. Not enough room. I figured after the fact that the bezel comes off from the outside Flip side is that its a helluva lot easier to put it back together
Dont need the red led anyways.. I think we all know when the batt is dead
Flip side is that its a helluva lot easier to put it back together Dont need the red led anyways.. I think we all know when the batt is dead
Has anyone heard of this My vv/vw 3 is cycling the button lights thru the on and off series of colors. Green yellow red green yellow red all the time. It works most of the time and if fully charge it Stops for a little while but as soon as you use it back the cycling. Also when pressing the button to use it the cycling stops and its its normal Colorado of green.
When I first read this I said "uh oh, sounds like he may have a bad unit" because it does happen every now and then with this or any electronic item but then I remembered how new an owner you are. Here is my diagnosis, you are inadvertently hitting the fire button a lot more than you think you are and you are throwing it in to the on/off cycle. The button is really buttery and it is extememly easy to do a momentary on/of just by rolling your finger around before or as you are vaping and the electronics count that as a button push and if it happens twice after you already pushed it to vape then it sees it as an on/off command.
Try making yourself very aware of hitting/depressing the button. I still turn mine on and off by accident some times after months of use. If it continues even after that, it might be time to contact your vendor. And just one more thing if you didn't know, there is large and knowledgeable thread dedicated just to the V3.
I have to say that I'm impressed with the MPV 2 so far. Got it Monday afternoon. 72 hours and 1050 puffs later on 1.8 ohm dual coils, it still has a 3.8 volt charge on it. The form factor and button were only awkward for the first day or so. And even with the big 3.5ml Aspire Vivi Nova Glassomizer it comfortably fits right in an old "Texas Hold-Ums" magnetic cell phone clip-on holster I had laying around, so I don't really see any downside yet.
Last edited:
aside from the slight giggle from the mental picture of myself vaping on a walkie talkie I'm liking the mvp
the battery life is awesome and consistent...haven't noticed any drop while vaping
if you can call it a down side,, I don't like that you can't actually just go up or down on the voltage, you have to cycle through it to get back to where you want to be and that it only goes up to 5v...but then again I hardly ever vape higher than that anyways so not a big issue.
the battery life is awesome and consistent...haven't noticed any drop while vaping
if you can call it a down side,, I don't like that you can't actually just go up or down on the voltage, you have to cycle through it to get back to where you want to be and that it only goes up to 5v...but then again I hardly ever vape higher than that anyways so not a big issue.
- Status
Similar threads
