Ok, I'm confused again. I have a Smok Tech Pyrex Aro tank which reads 2.5 ohms. When I press both buttons, it's says 2.5 and then 4.1.
Should I set the U button to 4.1? Thanks so much.
-
holding both buttons:
-first display is, Coil Ω
-second display is, Charge Remaining in internal battery
- - -
>push and hold (top button) "P" for watts control
>push and hold (bottom button) "U" for volts control
-the first display will always be Puff Counter (0-999)
(which actually just counts how many times you push your Fire button)
-second number displayed is adjustable setting (v or w)
--it is EITHER volts OR watts, never both
--3 clks off / 3 clks on (puff counter resets to "0" each time)
- - -
so with your stated settings; 2.5 / 4.1
your coil ohms is 2.5Ω
your battery charge is 4.1volts (full)
suggest you hold top button and set WATTS to 8w
or, if you prefer, hold bottom button and set VOLTS to 4.4v
after ½ dozen puffs or so it's not burnt tasting, continue from there
if not you know the rule, 'start low and work up the scale'...
