iTaste VTR MOD - Spare batteries - iClear 16D + more

Status
Not open for further replies.

SDMagoo

Unregistered Supplier
ECF Veteran
May 6, 2011
197
14
New Zealand
www.nakedvapour.co.nz
Hi everyone,


This week we have a new advanced MOD for release.


For those new to vaping, advanced MODs allow the user to adjust and control the power going to the atomizing device, this allows very precise control of the vape - further customizing the vape to your own preferences.


An example of this would be in the morning you may want a tamer vape, and as the day progresses you may find your needs change and you want a bit more grunt!!


Another example maybe down to how a particular e-liquid/atomizer combination responds to different power levels - fine tuning to suit effectively.


Advanced MODs are for advanced users, there are more variables with these devices and more things to potentially go wrong - burnt heads for one! - hence we do not recommend these types of devices to first time users or those still with their training wheels still on as such - vapers considering moving up to an advanced MOD will be comfortable and knowledgeable with the gear they have used to date and will have done their own homework on advanced MODs beforehand.


Sources for homework:
KiwiVapers.Com
http://www.e-cigarette-forum.com


The MOD we are releasing this week requires an IMR type 18650 battery to operate and the correct type of charger to be able to recharge this type of battery also - most advanced vapers may already have this gear.


For those not quite ready for the hardcore advanced products - below we have our standard 900mAh eGo-C batteries (as found in our Naked Kits - EVOD batteries have now been discontinued in the kits) and also the eGo-C Twist battery which is a good way of trying out a simple stepped voltage battery if you are keen to explore a bit more than fixed voltage output types offer.


Remember the lower the resistance of the atomizing device you are using for a fixed given voltage - the faster it will vape - ie; 1.5ohm on an eGo-C type battery is much stronger than 2.0ohm.


Stock notes




iClear 16D units are now back in stock




Archive of previous weekly newsletters - Click here


Cheers and vape on!





eGo-C 900mAh Battery


The eGo-C 900 battery is a voltage regulated 3.7 volt eGo styled battery.


All eGo-C type batteries have the following features.



  • Short Circuit Protection: Prevents damages to the battery circuitry in cases of short circuits - battery will resume operation once condition is removed.
  • Atomizer Protection: 10 second cut off
  • Low Voltage Protection: Shuts the battery down once the voltage reaches approx 3.3volt

eGo-C 900mAh Battery


900mAh
3.7volt regulated!








eGo-C Twist 1300mAh Battery


Produced by a leading e-Cigarette manufacturer these eGo styled variable voltage battery are very similar to our Vision Spinner batteries, but at a lower price point.
The eGo-C Twist is slightly larger in diameter than regular eGo batteries but for good reason, size equals capacity, and at 1300mAh this battery will have some endurance.


Setting your output voltage is easy, simply turn the knurled dial on the bottom to the voltage you would like.


Voltage output is stepped at 0.5v increments.



  • 3.3v -suitable for devices in the 1.5 ~ 2.4ohm range
  • 3.8v - suitable for 1.8ohm ~ 2.8ohm
  • 4.3v - suitable for 2.4 ~ upwards
  • 4.8v - suitable for 2.8ohm and upwards



eGo-C Twist - 1300mAh





Spinner/Twist style Variable Voltage








iTaste VTR by Innokin


The iTaste VTR is similar in overall design and function to the iTaste MVP with a few exceptions.


This MOD requires an IMR type 18650 battery (unprotected - availabvle separately) instead of the built in battery as with the MVP.


It also has an adapter module that allows 2 connection positions - an upper 510-eGo type connection when the module is fitted (standard as with the MVP) so will accept most atomizing devices that are either 510 or eGo connection types.








iTaste VTR MOD




NEW by Innokin
18650 sized MOD











iClear Dual Coil Head - Replacement 5 PACK


Replacement dual coil heads for the Innokin iClear 16 and iClear 30 Dual Coil Clearomizers only
5 PACK


1.5ohm - IN STOCK - heads are typically suitable for eGo type output devices, 3.3-4.0v


2.0ohm - IN STOCK - heads are better suited at voltages over 3.7volt - EVOD - eGo-C & Biansi batteries - as supplied in the clearomizers in the Naked iClear 16 kits and Explorer kit


We have new generic iClear 16 heads - available from the drop down menu (unbranded heads - suspected to be Innokin, same head, same packaging, same outer box type) - same cost also hence no difference in price.


1.5ohm - Generic type - in stock
2.2ohm - Generic type - in stock


iClear 16 - Dual Coil Head - 5 PACK


5 Pack
Replacement Heads









Archive of previous weekly newsletters - Click here


Until next week, cheers from Rob, Lia and team at Naked Vapour.



Naked Vapour is New Zealand's e-Cigarette specialist.


www.nakedvapour.co.nz




For more help, support, news, reviews and opinions, please visit and register for FREE with our forum at www.kiwivapers.com

Copyright © 2014, Naked Vapour Ltd, All rights reserved.
 
Status
Not open for further replies.

Users who are viewing this thread