hello I'm new to the forum and to gaping sort of. I have a question has anybody disassembled an itaste vv yet. I'm attempting a mod and need to know where a few of the wires solder to the board at. It was given to me after someone else disassembled it any help would be greatly appreciated .
Itaste vv help
- Thread starter Bigmater
- Start date
- th_trl_thread_readers 0
- Status
Siskysouth disassembled the one I gave her, shoot her a PM?
ETA: Can't really recommend doing that...do so at your own risk
ETA: Can't really recommend doing that...do so at your own risk
the trouble with those things is there is a live battery inside; so if you are going to dissassemble it, you need to make sure you can disconnect the battery itself , early and get it out of the way.
you don't want to accidentally short out the battery while poking around with metal tools.
the lithium batteries pack alot of energy for their size, and some types will go into chain reaction thermal runaway if shorted out directly.
you don't want to accidentally short out the battery while poking around with metal tools.
the lithium batteries pack alot of energy for their size, and some types will go into chain reaction thermal runaway if shorted out directly.
ok well it is already separated from the board with the display. They removed the battery and all the wires from the the display board. They are labeled with letters but I'm unsure about where the battery wires solder to and the center post wire.
Last edited:
thank you to the help and advice. I was able to repair the itaste vv . It works fine but I damaged the printed board that runs the lights on the button but if that's all that's wrong I will take it! I tested everything with my volt ohm meter and everything works! So if anybody needs help I am sure I can help!
Congrats on fixing everything! You attempted something I wouldn't even dream of, and you had success, that's awesome!
Yeah i took apart the one that issy gave me and was able to correct the problem it had which the wire that connected the center post was not connected all the way. it worked but now its still giving me problems. the ohms readings are super high. i have a silver one and issy gave me a black one. my silver one gives me normal ohms readings but the black one i can't figure out whats wrong with it. im about ready to go find someone with a electrical volt reader just to see where the problem is. Right now my silver one had a .... up last night. i don't know whats going on and it working again but being weird.
- Status
Similar threads
