Ithaka's telescopic mouthpiece, upper body and steel window preorder

[imeothanasis]

Preorders for Ithaca's telescopic mouthpiece will start on Sunday morning and they will stop at Saturday morning. I also put on this preorder the upper body of Ithaca because that way you can add upper bodies to your Ithaca to make it longer. You can add up to 2 upper bodies on Ithaca using this new mouthpiece.

Every upper body increase the capacity of Ithaca at exactly 2ml of liquid, so 2 upper bodies adds 4 ml of liquid.

With this new mouthpiece you can decrease the length of your Ithaca by removing the existing upper body.

If you dont want to add more capacity to your Ithaca, you can still buy only the telescopic mouthpiece because with this mouthpiece you will be able to fill your Ithaca only from its upper small cap, something that you cant do right now without a syrigne. Also buying only this new mouthpiece, you can adjust the length of it. That way the mouthpiece will suit to your needs.

If you deside to make your Ithaca shorter, you will need to my opinion the steel window, because the clear window will be ruined after some time by screwing on it the reffiling cap

The price for telescopic mouthpiece will be at 30 euros, every upper body is at 9 euros and steel window is at 12 euros

Thanks guys

 

[LongHaul]

Count me in.

But one question? Will the new mouth piece take a 510 drip tip. Cause in my line of work its hard to refil the Ody while I am driving and I am kinda scared of hitting a bump and knocking out a tooth with the steel mouth piece. Just a thought.


.

 

[Aal_]

Imeo, don't forget to put that on the official announcements thread so that people subscribed there know about it.

 

[jmarkus]

can you also add in a pre-order for a smooth air control ring, imeo? id love to buy that too.

 

[imeothanasis]

no Long, sorry buddy.

Count me in.

But one question? Will the new mouth piece take a 510 drip tip. Cause in my line of work its hard to refil the Ody while I am driving and I am kinda scared of hitting a bump and knocking out a tooth with the steel mouth piece. Just a thought.


.

 

[imeothanasis]

Thank you aal, I forgot it!!!

Imeo, don't forget to put that on the official announcements thread so that people subscribed there know about it.

 

[imeothanasis]

smoth with 2 cuts like the base of Ithaca has jmarkus?

can you also add in a pre-order for a smooth air control ring, imeo? id love to buy that too.

 

[jmarkus]

smoth with 2 cuts like the base of Ithaca has jmarkus?

i dont even think it needs any cuts since its turns so easy and smooth....i think it would look awesome just smooth.

 

[imeothanasis]

I think we have to discuss more about this markus. For example, if you have very dry or very sweaty or very moist fingers, you will not be able to turn it easy as I see it

 

[jmarkus]

I think we have to discuss more about this markus. For example, if you have very dry or very sweaty or very moist fingers, you will not be able to turn it easy as I see it

you dont have cuts on the big top cap, and that seems harder to turn then the air contol. just saying. i wouldnt be opposed to cuts, but i do love the idea of a really nice smooth ring. it would also tie the top big cap to the bottom air control ring in shiny smooth design goodness. i could even see doing away with the knurling on the BF since that already has cuts. having a knurl-free ithaka would be so slick.

imeo, youre a good man for even considering and talking about doing this...youre really are such an amazing creator that takes feedback directly from his users and actually thinks about it. truly one of the most interesting, exciting "consumer" experiences ive ever had. i put quotes around "consumer" because it doesnt feel like a purchase...more like an experience.

thanks for being you, imeo.

 

[Rene.one]

How long we have to wait till we have the parts in our hands?

 

[giuseppef4]

No update for 510 standard atty?

 

[imeothanasis]

Thank you for your nice words my friend Markus. You are right on what you said about reffiling cap etc. But I prefere to make 2 small cuts on the ring because not all people can turn it easy. But on the other hand the internal diameter of the chaznnel where the o-ring sits is 23mm and the external diameter of the ring is 24mm, so its almost impossible to make cuts on it. I have to think a little more about it. We can always make a preorder for those rings at any time because its only 1 piece and it can produced quickly

you dont have cuts on the big top cap, and that seems harder to turn then the air contol. just saying. i wouldnt be opposed to cuts, but i do love the idea of a really nice smooth ring. it would also tie the top big cap to the bottom air control ring in shiny smooth design goodness. i could even see doing away with the knurling on the BF since that already has cuts. having a knurl-free ithaka would be so slick.

imeo, youre a good man for even considering and talking about doing this...youre really are such an amazing creator that takes feedback directly from his users and actually thinks about it. truly one of the most interesting, exciting "consumer" experiences ive ever had. i put quotes around "consumer" because it doesnt feel like a purchase...more like an experience.

thanks for being you, imeo.

 

[imeothanasis]

Much less than Ithaca preorders Rene. Production will start in 4 days, I need 15 days to make them and another 15 days to shine and clean them, so in 1 month we will be ready

How long we have to wait till we have the parts in our hands?

 

[imeothanasis]

You mean the adapter for Ithaca to make it compatible with regular 510 atomizer gius? If you mean this, we can do it but I have to make the designs first and see how much more length we need on Ithaca for this. And maybe we can find a new design for the mouthpiece that will be needed to use a 510 atomizer on Ithaca. Except we make only the adapter and use a 510 atomizer without liquid control inside Ithaca

No update for 510 standard atty?

 

[giuseppef4]

Exactly like a Ody Upgrade kit for 510 standard atomizer. We had an adapter to insert 510 regular atomizer and new mouthpiece.

You mean the adapter for Ithaca to make it compatible with regular 510 atomizer gius? If you mean this, we can do it but I have to make the designs first and see how much more length we need on Ithaca for this. And maybe we can find a new design for the mouthpiece that will be needed to use a 510 atomizer on Ithaca. Except we make only the adapter and use a 510 atomizer without liquid control inside Ithaca

 

[imeothanasis]

lets first make things that I put on preorder right now and then we make a second preorder asap Gious. I need some time to think a little more about the designs of this construction

 

[allentu]

If we order these parts, can we save money on shipping by requesting that our new order be combined with our ithakas?

 

[Poppa D]

Imeo,
I remember the iAtty MP shape as being very comfortable to use, could you contour a telescopic MP to be like the iAtty's?

 

[imeothanasis]

New mouthpiece will be ready 1-1,5 month later than Ithaca allen. I dont think that you or anyone else wants to wait so long time

If we order these parts, can we save money on shipping by requesting that our new order be combined with our ithakas?