I'm really impressed with mine! I'm definitely getting another one, but I'm hoping to find out a couple of things:
1. Will there be replacement parts available? I refer especially to the little metal terminal post clips. I've already lost one (which I finally found two days later; it's amazing how far these little devils can bounce on a hard floor ... it would up back in a corner, five feet away from the drop zone!), and I expect, with my advanced case of fumblefingers, that I'll lose many more. Having these available in a 10-pack would be about right, but I'd buy them in pairs if necessary ...
2. Are additional soft silicone tank caps available? The two that came with my Eternity seem to be slightly different than the ones I once had with my original eGo-T Type A tanks.
3. When using the Eternity in tank mode, is it better to pop out / cut out the little center hole in the soft silicone cap before inserting the tank, or just insert the tank with the cap intact and let the spike punch its own hole?
4. The terminal posts and their little clips seem designed to work with 36 gauge wire; I have both 33 gauge and 36 gauge Kanthal A-1, and while the 36 gauge works perfectly, the 33 gauge won't quite allow the little metal retaining clips to seat all the way on the terminal posts. I can make the 33 gauge "work", but since the little clips don't fit all the way down on the posts, the coil is elevated above the center air hole post about 1mm ... I worry that this arrangement may not be secure and a hard knock might dislodge one of the post clips and short something out. Is this a real concern, or am I just being a weenie?
This is quite a lovely piece of gear, and one of the easiest RBAs around. Hope I can get answers to the above questions so I can order more with confidence!