• Need help from former MFS (MyFreedomSmokes) customers

    Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?

    View thread

JAC Vapour Series-B DNA 75w

Status
Not open for further replies.

DPLongo22

aka "The Sesquipedalian"
Supporting Member
ECF Veteran
Verified Member
Dec 17, 2011
32,353
169,357
Midworld
does everybody remember we used to use VOLTS
then a break-thru appeared and you could VARY the output of the VOLTS (variable volts (VV)

then we started with WATTS controlling our output (evolv has a U.S. Patent on Watts in a mod)
then yep, now able to adjust the Wattage output (VW)

then the ability to control the TEMP was introduced (evolv again)

so to recap, now we can;
•control the TEMP
•control the watts
•and put little pictures on our mod's display screen

-I can do without the little pictures
-I play with TC
-but I really like to play with my Watts adjustment

:thumb: :matrix: :thumbs:

I'm holding out for the coffee maker.
 

Bronze

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Aug 19, 2012
40,234
185,205
I think the hard part is going to be getting that danged booklet from the Jac unwound enough to read it. I reversed rolled it and will let it set that way while I go get my hamburger for lunch. :D
That JAC booklet makes for an excellent leaf spring for my truck.
 

DPLongo22

aka "The Sesquipedalian"
Supporting Member
ECF Veteran
Verified Member
Dec 17, 2011
32,353
169,357
Midworld
I think the hard part is going to be getting that danged booklet from the Jac unwound enough to read it. I reversed rolled it and will let it set that way while I go get my hamburger for lunch. :D

That JAC booklet makes for an excellent leaf spring for my truck.

:lol::lol:
 

DPLongo22

aka "The Sesquipedalian"
Supporting Member
ECF Veteran
Verified Member
Dec 17, 2011
32,353
169,357
Midworld
I want a calendar, calculator, and steam engine chart added to my DNA 75.

Built in Uber app (if they're still even around by then :facepalm: ).

OK then, Lyft. Whatever (y'get the picture).
 

Bronze

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Aug 19, 2012
40,234
185,205
I'm days behind: thank you to those who provided advice to my question about TC. I'm intrigued.
There is no reason to not try TC with a dripper, or is there?
Have at it. I started with a dripper and I got zero flavor. But it was an older titanium dripper so hard to project to other drippers. Should not be a problem though and doesn't hurt to try.
 

oplholik

ECF Guru
ECF Veteran
Verified Member
Mar 22, 2011
12,078
33,620
San Bernardino area, So. Cal.
Okee, so I got it s/u. My coil that tested on the Tab 521 at 1.6Ω, is now 1.23Ω on the Jac. I got it set at 15w, and 425F. It's pretty close to what I like I think. First thing I notice, I think, is that if I chain vape this, it doesn't get any hotter than the first time I hit it, ,it stays consistent. So far so good. :)
 

Bronze

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Aug 19, 2012
40,234
185,205
I'm days behind: thank you to those who provided advice to my question about TC. I'm intrigued.
There is no reason to not try TC with a dripper, or is there?

I would think that tc with a dripper would be the best application for tc. But I'm a nube at tc, so I really don't know.
TC is just another way to produce vapor. The atty type is irrelevant.
 

vapdivrr

Vaping Master
ECF Veteran
Verified Member
Jul 8, 2012
9,966
19,798
59
sarasota,fl
does everybody remember we used to use VOLTS
then a break-thru appeared and you could VARY the output of the VOLTS (variable volts (VV)

then we started with WATTS controlling our output (evolv has a U.S. Patent on Watts in a mod)
then yep, now able to adjust the Wattage output (VW)

then the ability to control the TEMP was introduced (evolv again)

so to recap, now we can;
•control the TEMP
•control the watts
•and put little pictures on our mod's display screen

-I can do without the little pictures
-I play with TC
-but I really like to play with my Watts adjustment

:thumb: :matrix: :thumbs:
I really liked vw when it came out because of the ohms thing...I was always building and trying different resistances and a vv device just kept the same voltage without recognition of said coil, so I constantly had to re adjust voltages, but it made you know ohms law really good

Sent from my SCH-I545 using Tapatalk
 

Bronze

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Aug 19, 2012
40,234
185,205
Okee, so I got it s/u. My coil that tested on the Tab 521 at 1.6Ω, is now 1.23Ω on the Jac. I got it set at 15w, and 425F. It's pretty close to what I like I think. First thing I notice, I think, is that if I chain vape this, it doesn't get any hotter than the first time I hit it, ,it stays consistent. So far so good. :)
Exactly! With TC there is a temperature ceiling you hit. With power mode there isn't (there actually is but it is beyond relevance). You can draw on TC longer than power mode without burning your frap off. In power mode we tend to compensate by letting off the fire button and refiring. Less of that with TC.
 

Bronze

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Aug 19, 2012
40,234
185,205
One of the reasons we cough our asses off from taking too big of a hit is because of temperature. If it gets too hot our lungs reject it by coughing. Yes, there are other factors...temp is just one. TC alleviates some of this.
 

oplholik

ECF Guru
ECF Veteran
Verified Member
Mar 22, 2011
12,078
33,620
San Bernardino area, So. Cal.
Exactly! With TC there is a temperature ceiling you hit. With power mode there isn't (there actually is but it is beyond relevance). You can draw on TC longer than power mode without burning your frap off. In power mode we tend to compensate by letting off the fire button and refiring. Less of that with TC.

So, some of the advantages become evident pretty quickly. :)
Should I lock in my watts, or just let it go?
 
Status
Not open for further replies.

Users who are viewing this thread