JAC Vapour Series-B DNA 75w

[DPLongo22]

but I also understand vape is harm reduction, not harm elimination.

"Like" x1000!

The JAC delivers. I still think in voltage and run at 4v, which on the radius and P3 shows 7.8watts. I guess I'm a tootle puffer!

You most certainly ARE! You're not in bad company either (but I'm biased).

 

[MikeE3]

A match made in vape heaven ... something new / something old. I pulled from storage a KFL-nano. I forgot how 'good' these are ... no wonder my wife has no desire to move beyond her collection of KFL-lites. When I match the vape of this w/ a TC build, then I'll be happy.

This one is using a 2.5mm id coil, 7 wraps of Kanthal for 1.7 Ωs, and vaping it at 12 watts.

 

[Pinggolfer]

Yes, I'm building on the K5. Works great. Subohming doesn't really mean anything in TC. It's no more cloud chasing than a standard 1+ ohm kanthal build. I'm set at 420 F at 20W. The wattage isn't that important. 20W gets it to temp plenty fast.

As I patiently wait for my mod are you setting temperature and watts or one or the other? The K5 is so easy to put a build on it. My K5 reads .066 and I'm using 21 watts with the Provari boost set at 3. I did go from 50/50 juice to 70/30 VG/PG.

 

[DPLongo22]

A match made in vape heaven ... something new / something old. I pulled from storage a KFL-nano. I forgot how 'good' these are ... no wonder my wife has no desire to move beyond her collection of KFL-lites. When I match the vape of this w/ a TC build, then I'll be happy.

This one is using a 2.5mm id coil, 7 wraps of Kanthal for 1.7 Ωs, and vaping it at 12 watts.

Love it, Mike - looks great.

I have that same tip.

 

[Bronze]

As I patiently wait for my mod are you setting temperature and watts or one or the other? The K5 is so easy to put a build on it. My K5 reads .066 and I'm using 21 watts with the Provari boost set at 3. I did go from 50/50 juice to 70/30 VG/PG.

Both. You set your temp and your watts. The instructions will show you how. The watts ramp up till you hit the set temp then it backs off to maintain the temp.

 

[Jumpin' In...]

A match made in vape heaven ... something new / something old. I pulled from storage a KFL-nano. I forgot how 'good' these are ... no wonder my wife has no desire to move beyond her collection of KFL-lites. When I match the vape of this w/ a TC build, then I'll be happy.

This one is using a 2.5mm id coil, 7 wraps of Kanthal for 1.7 Ωs, and vaping it at 12 watts.

That DOES look like a nice set-up!

Maybe I should look at a few KFL vids. Never owned one, but I vaguely recall that the draw is very tight (1.6 mm max?) and you can't work the build without draining the tank?

 

[MikeE3]

That DOES look like a nice set-up!

Maybe I should look at a few KFL vids. Never owned one, but I vaguely recall that the draw is very tight (1.6 mm max?) and you can't work the build without draining the tank?

I wouldn't call the original KFL's draw as very tight. It's an acceptable draw. I do more prefer a more open draw like the KF5's but I did have to get used to that ... in the beginning they felt like vaping through a milkskake straw. I gotten acceptable builds on the KFL-lite for use w/ TC vaping ... but it is limited due to the limited draw.

I can not get my wife to use anything other then KFL-Lites, so my challenge is getting 'em to work w/ TC. I now prefer the more open draw of the 2nd/3rd gen KFLs for Kanthal or TC builds. Particularly it seem's TC vaping likes more air going over the coil/wick to aid in cooling/temp protect.

If you can find a Kayfil tool ... they work well for disassembly of the KFL-Lite w/o draining the tank for re-wicking/coiling.

 

[Jumpin' In...]

I wouldn't call the original KFL's draw as very tight. It's an acceptable draw. I do more prefer a more open draw like the KF5's but I did have to get used to that ... in the beginning they felt like vaping through a milkskake straw. I gotten acceptable builds on the KFL-lite for use w/ TC vaping ... but it is limited due to the limited draw.

I can not get my wife to use anything other then KFL-Lites, so my challenge is getting 'em to work w/ TC. I now prefer the more open draw of the 2nd/3rd gen KFLs for Kanthal or TC builds. Particularly it seem's TC vaping likes more air going over the coil/wick to aid in cooling/temp protect.

If you can find a Kayfil tool ... they work well for disassembly of the KFL-Lite w/o draining the tank for re-wicking/coiling.

Well, please let us know how it performs for you in TC. Something to think about...(like I really need more tanks).

 

[oplholik]

That DOES look like a nice set-up!

Maybe I should look at a few KFL vids. Never owned one, but I vaguely recall that the draw is very tight (1.6 mm max?) and you can't work the build without draining the tank?

On my KFL shorties, if the chimney is tight enough in the tube, you can take the base out and work on the build, just as long as the chimney doesn't come loose in the tube.

 

[Pinggolfer]

Oh my package is really moving along. So far it's gone from Shenzhen to Shenzhen to Shenzhen. I'll never complain about USPS again.

Number: CX009397814CN
Package status: In transit
Destination country: United States
2017-07-21 20:41 CHINA, Acceptance, Your item was accepted at 8:41 pm on July 21, 2017 in CHINA.
Origin country: China
2017-07-22 12:53 Shenzhen, left Shenzhen to Shenzhen postal courier company (Hong Kong) business unit
2017-07-22 12:53 Shenzhen, left Shenzhen to Cuddalore (France)
2017-07-21 20:41 Shenzhen, xili town, Shenzhen express Marketing Department has been received (the embrace cast member name: Huang Yuming, Tel: 075526942652

If you can find a Kayfil tool ... they work well for disassembly of the KFL-Lite w/o draining the tank for re-wicking/coiling

I have a fix for filling the KFL. I'll post a picture tomorrow. I think I have 3 KFL'S lites which I seldom use much. They may end up in the classified ads.

 

[DPLongo22]

Both. You set your temp and your watts. The instructions will show you how. The watts ramp up till you hit the set temp then it backs off to maintain the temp.

So how would I get a consistent vape, or is that simply not part of the deal?

NOT saying I'm changing anything, more just wondering. I like to know what I'm getting when I push the button (which is what drew me to ProVape, so very long ago).

 

[Jumpin' In...]

So how would I get a consistent vape, or is that simply not part of the deal?

NOT saying I'm changing anything, more just wondering. I like to know what I'm getting when I push the button (which is what drew me to ProVape, so very long ago).

After the ramp up to the set temperature - which happens in a fraction of a second - your liquid should vaporize at a set temperature - or very close to it - until the fire button is released. Some TC chips do better than others at accomplishing this and the Evolve DNA chips are considered by many to be at the top of the hill. (Can't say that from personal experience yet...)

 

[Bronze]

So how would I get a consistent vape, or is that simply not part of the deal?

NOT saying I'm changing anything, more just wondering. I like to know what I'm getting when I push the button (which is what drew me to ProVape, so very long ago).

Look at your watts as the furnace and TC as your thermostat. The watts generate the heat the TC keeps it at the temperature you want. When you hit the fire button the furnace gives you a blast and as soon as it hits the set temp it kicks back to maintain that temp.

 

[dobroeutro]

Nice surprise for me today, 4 new Jacs arrived to join the party...

 

[DPLongo22]

Nice surprise for me today, 4 new Jacs arrived to join the party...

Wow! Congratulations & what's that make now, six? You're dancing into ProVape, Billet Box & Reo numbers.

I like it..

 

[dobroeutro]

Yep, 6 Jacs for us now. You need backups for your backups... lol. That makes 30 mods for us now. We should be good for awhile...

 

[DPLongo22]

Yep, 6 Jacs for us now. You need backups for your backups... lol. That makes 30 mods for us now. We should be good for awhile...

At least until the Labor Day sales.

 

[Jumpin' In...]

Yep, 6 Jacs for us now. You need backups for your backups... lol. That makes 30 mods for us now. We should be good for awhile...

Heh. Yep. Until the "next big thing".

 

[dobroeutro]

At least until the Labor Day sales.

Well, I have been eyeing that 24mm Wotofo Serpent SMM RTA. I guess we'll need a couple of mods for those to sit on...

 

[Pinggolfer]

(psssst... just so y'all know... temco 28 agw ss316L 25ft. $0.99... shipped same day... TEMCo Stainless Steel Wire 316L Non-Resistance AWG ga | eBay [sorry, gauges other than 28 are more $$$])

Great deal for a buck. Bought some.