Does any one know if a Janty 801 to 901 Adapter work on any 801 size product to any 901 size product? I mean not just Janty.
Janty 801 to 901 Adapter Question
- Thread starter Mary Kay
- Start date
- th_trl_thread_readers 0
-
- Tags
- altsmoke litecigusa
- Status
I do not own one but am pretty sure that all 801 and 901 connectors are the same no matter where you get them from so I would guess that the adapter would work. Also, Altsmoke.com sells adapters for 12.95. I bought a 510 to 801 adapter that works with everything I have.
Hi MaryKay. I'm sorry I can't answer your specific question, but I would love to know where I can order a Janty 801 to 901 adaptor in the USA. I'd like to use it for my JS, but the Janty USA site has been showing them as unavailable for ages. I asked Ethan when they expected to have some in stock. His reply was that he had no idea. I'm appreciative that he replied, but it was less than helpful to me in locating one. I sure would appreciate if you, or anyone who reads this, knows where I could find one. Hope someone is able to answer your question 
What I am trying to find out now is if the janty adapter is like the one pictured below..just a ring with threads on both ends or is it more like an extenter with threads on both ends.
I figured out since the janty takes an dse801 atomizer or a pipe atomizer then the threads will work on any 801 product. The other end will take a dse901 so that thread will work on any 901 product. Now all I need to know is the size.
Pictured is my mini pipes with a 801 to 901 adapter and a dse901 atomizer.
I figured out since the janty takes an dse801 atomizer or a pipe atomizer then the threads will work on any 801 product. The other end will take a dse901 so that thread will work on any 901 product. Now all I need to know is the size.
Pictured is my mini pipes with a 801 to 901 adapter and a dse901 atomizer.
Hi MaryKay. I'm sorry I can't answer your specific question, but I would love to know where I can order a Janty 801 to 901 adaptor in the USA. I'd like to use it for my JS, but the Janty USA site has been showing them as unavailable for ages. I asked Ethan when they expected to have some in stock. His reply was that he had no idea. I'm appreciative that he replied, but it was less than helpful to me in locating one. I sure would appreciate if you, or anyone who reads this, knows where I could find one. Hope someone is able to answer your question
They won't be Janty, but I believe Altsmoke is going to have them soon. (The 801 to 901 adapters). Check out his website.
Perhaps someone out there that owns one could put a dial caliper on one and give you the dimensions. Have you tried emailing janty? Maybe they could tell you.
The adapter I have is from Vaprlife VaprLife
they can also be found at Litecig LitecigUSA
and Truesmoker. ECIG - TrueSmoker: M401 Dragon
they can also be found at Litecig LitecigUSA
and Truesmoker. ECIG - TrueSmoker: M401 Dragon
Thanks for the info beckah54, I'll keep an eye on Altsmoke's site to see if their adapter is something that will work in a Janty Stick. Much appreciated
MaryKay, not sure if this will be helpful to you or not, but the Janty USA site has a pic of their Janty Stick 901 adaptor under Janty Stick Accessories. I'd supply the direct link, but my noob status here doesn't allow me to post URLs yet. lol
MaryKay, not sure if this will be helpful to you or not, but the Janty USA site has a pic of their Janty Stick 901 adaptor under Janty Stick Accessories. I'd supply the direct link, but my noob status here doesn't allow me to post URLs yet. lol
I saw that! But it shows a partial picture and I couldn't tell if it was a ring like in my picture or a longer extender type adapter.
The Janty 801 to 901 adapter looks like an 801 atomizer but is about 1/4 inch shorter.
It has an 801 connector on one end the other end is open. The connector for the 901 atty is deep inside the tube so that the 901 atty is totally inside the adapter when installed.
The end of the 901 atty is flush with the end of the tube. Hope that makes sense.
It has an 801 connector on one end the other end is open. The connector for the 901 atty is deep inside the tube so that the 901 atty is totally inside the adapter when installed.
The end of the 901 atty is flush with the end of the tube. Hope that makes sense.
Mine does..on my mini pipe and on my VP1. I don't have an 801 battery but I have been told it works just fine.
There are several links below that give you places to buy them. I also saw where Rob at Altsmokes will be offering them.
Vapor Country sells a 901 to cartomizer adapter also.
There are several links below that give you places to buy them. I also saw where Rob at Altsmokes will be offering them.
Vapor Country sells a 901 to cartomizer adapter also.
Thank you! That answers my question! The information was for another poster here on ECF..
- Status
Similar threads
