Janty eGo JETS - Tank System - How is it working for you?

[Ultra]

I have been using the Janty eGo JETS tank System for 4 weeks solid now, and am very impressed with this new system. I have found this e-cig system to be the best that I have tried yet, and have actually been able to completely quite all analog tobacco completely for the first time ever!

I thought that I would share my personal experiences, and others can share theirs.
Here are my thoughts on the tank:

Very consistent performance - from full tank to almost dry​

Ease of use - (Easy to refill, Large capacity e-liquid, No Leakage!)​

Excellent - Vapour Production - even from full PG-base E-Liquid​

Very Good - Flavour​

Good - Throat-hit - from 16mg strength E-Liquid (could be better, waiting to try LR)​

Very consistent performance - from full tank to almost dry​

I have tried using the same Cart-tank over and over (3 weeks solid) with no problems except that the top cap is starting to get a little loose. I am getting way more Vapor than ever before, and like the draw action of this new Atty/Cart. I have heard of some users complaining of leakage, and or lack of vapor, here are some tips that I have implemented myself:

Only re-fill Cart-Tank 90% full​

Re-fill Cart-Tank before it runs out of liquid​

Clean out Atty if taste or performance seem off (run under hot water, blow out both ends, tap on papertowel, dry with papertowel)​

When inserting new or re-filled Cart-Tank, I hold the Tank with the top cap upright, and insert the battery/atty upside down​

Just thought that I would put down some of my thoughts/experiences on this new system.
Please let us know what your thoughts are!

Regards,
Sean SonHing
Janty Canada
Janty - designer/ developer of the Dura (510), and eGo.
Janty - 6 month warranty
electronic-cigz.com

 

[character]

how do you refill the cartridge?

 

[Ultra]

To Refill empty Janty eGo-T Carts:

1. Hold your eGo-T vertically upside-down (mouthpiece pointing to floor, and batt pointing to ceiling)
2. Carefully slide the Cartridge straight out from the Atomizer
3. Remove the top cap of the Cartridge
4. Fill the empty eGo-T Cart no more than 90% full.
5. Put top cap back onto Cart
6. Slide the eGo-T Cart back into the Atomizer (in same position as when you removed it)
7. You are ready to vape!

 

[Kbut655]

I love my Janty Jets.
I have been vaping the same tank atomizer for almost 8 weeks and it is still good as new.
(once a week, I blow it out and clean all the connections.)

I have had no leakage probles whatsoever.

The taste is close to dripping but the portability is the big selling point.
2 fills a day,
a battery lasts 24hours (900mAh)
size is comfortable.
Less of a learning curve than other systems.
Well built and solid.

The best experience so far!!!

 

[Ultra]

We just got in the new Janty eGo JETS LR Atomizers and I have been using it for the past few days.
First day impression I was a bit disappointed, it had a very bad taste and only middling performance. I cleaned it out, and tried re-using it, and after a full day of breaking in this Atty is now working like a champ!!

In my opinion this LR Atty gives much more vapor, and throat-hit than the standard JETS Atty. The flavor is still excellent (almost as good as direct dripping), and the consistency/ease-of-use of the JETS system is incomparable to anything else on the market. The vapor is a bit warmer than the cool vapor of the standard JETS Atty, and you get more of that nice crackling sound/feel when taking big draws... much closer to a real ciggy!! Drawbacks - the LR Atty uses up a lot more e-liquid, I am re-filling almost twice as much as a standard Atty... but well worth it!!

The Janty eGo JETS system is the biggest advance that I have seen in an e-cig model to date. The Janty JETS LR has truly made me fall in love with my vaping all over again!!

 

[hbpersians]

Had some frustration in the beginning as I am a total noob to this whole vaping thing. LOVE IT! My only problem is that I ordered a ton of sample flavors and the tanks last so long (about 2 a day) that I over vape wanting to get to the next new flavor! Is there a way to quickly clean the atty so that the flavors don't mix when I change during the day? If I'm at work, I don't have a lot of time to dink with it.