Joyetech Evic VT 60 Watt

[hashtag]

What issues are you having with your dodgy unit?

Ohm's reading changes when locked, jumps into power mode randomly with rda's.

 

[Bikenstein]

It's amazing the inflection one gets with words when they exclude the next four words after "fantastically".

I didn't mean anything but glad you are amazed.

 

[foggybottom]

TThis is useful when I do something like filling a tank that I have been actively vaping. If I have the atomizer locked, I am able to avoid starting a new refinement process with a warm coil and in-theory, I should enjoy the same experience I had before draining the tank.

I believe the same thing is true even if you do not have the lock on, if you toggle left at the "same coil left" question on reinstalling the topper.

 

[Bikenstein]

This is a gigantic point of confusion. The Evic VT does not have a "Resistance Lock." The Evic VT does have an "Atomizer Lock." Many of us are confused because of cross-device differences which we are mistakenly perceiving as similarities.

The Evic VT does not ever try to lock a resistance. Rather, it constantly refines the base resistance regardless of whether or not an atomizer has been locked.

I believe my understanding is correct. That said, I would prefer a mod with an actual resistance lock. The Evic VT simply does not lock resistances. Coil temperatures are calculated based on the difference between current measured resistance and the base reference resistance. We do not control the base reference resistance.

Get an SX Mini M. Regardless of what the VT is doin it still seems to be able to hold a set temp. Interesting though. The DNA 40 from my understanding adjusts wattage to maintain temp while the SX uses pwm.

 

[cdrice15]

Did both register the same resistance. Maybe the sx was locked at ~.01, .02 higher than on the vt after vt refined it.

That would cause a difference in temp setting, no?

On the sx it registered at 0.074 and on the evic at 0.08

 

[damped]

On the sx it registered at 0.074 and on the evic at 0.08

But 0.075 or 0.076 on the VT is 0.08 on the screen, take that in mind also.

 

[BNEAT]

I didn't mean anything but glad you are amazed.

The amazing part is that his eVic "works 10 times better than the early DNA 40's"

 

[Bikenstein]

The amazing part is that his eVic "works 10 times better than the early DNA 40's"

I wasn't gonna comment on that but if it is 10 times better than my DNA 40 then I'll be thrilled!

 

[BNEAT]

I wasn't gonna comment on that but if it is 10 times better than my DNA 40 then I'll be thrilled!

I like the vape better, no doubt: The extra power makes for super fast heat-up. The TC doesn't seem better or worse than any other TC board, but the ease of use, battery longevity, size, and price makes this a hell of a bargain....well, when it works correctly.

To say it works "better" than my early DNA40 is laughable. I've had it for 7 months and it's worked absolutely flawlessly the entire time. It's outdated now, but still flawless.

 

[USMCotaku]

Not everyone's early dna40's were problem free
If he got a good evic and a glitchy DNA .........
Sent with one hand, the other is busy vaping.

 

[AnsonJames]

I like the vape better, no doubt: The extra power makes for super fast heat-up. The TC doesn't seem better or worse than any other TC board, but the ease of use, battery longevity, size, and price makes this a hell of a bargain....well, when it works correctly.

To say it works "better" than my early DNA40 is laughable. I've had it for 7 months and it's worked absolutely flawlessly the entire time. It's outdated now, but still flawless.

My first DNA 40 was an absolute pile of poo, so were my second and third...
The VT has it's foibles but it's still far better than the early DNA's - luck of the draw I guess!

Ohm's reading changes when locked, jumps into power mode randomly with RDA's.

So one of your Evic's doesn't have jumpy ohms lock but the other one is fine?
Sounds like I may have a faulty VT, thinking the 510 could be part of the problem.

 

[mc8]

Oh, it's definitely going back. Even though I'm sure mine is just a defect of some sort, I'm going to wait until there's a for-sure firm ware update. I'm hoping they update the Ti coefficient, too.

What resistance/material coil were you using when it dropped .01? (My ADV tank does the same thing in my DNA40 after a week or so of gunk build up)

It was a standard ni200 30awg build @ .12 in lemo 2. Ambient temperature changes of 15+'C every day, sandy beach, lots of wind, sun, laying around in backpack,..thats why i said abuse

Hope your new one will be as good as it can be

 

[hashtag]

My first DNA 40 was an absolute pile of poo, so were my second and third...
The VT has it's foibles but it's still far better than the early DNA's - luck of the draw I guess!



So one of your Evic's doesn't have jumpy ohms lock but the other one is fine?
Sounds like I may have a faulty VT, thinking the 510 could be part of the problem.

Yeah my yellow is solid but my white has various different problems, all the problems do seem to be related to the 510 or at least some kind of connection problem reading the atomizer.

 

[BNEAT]

My first DNA 40 was an absolute pile of poo, so were my second and third...
The VT has it's foibles but it's still far better than the early DNA's - luck of the draw I guess!

I may have conveniently forgotten, but besides the screen scramble issue, (which was a huge deal) what other problems did the early boards have?

 

[BNEAT]

It was a standard ni200 30awg build @ .12 in lemo 2. Ambient temperature changes of 15+'C every day, sandy beach, lots of wind, sun, laying around in backpack,..thats why i said abuse

Hope your new one will be as good as it can be

Yeah, I want mine to work like that!

 

[USMCotaku]

Deleted....I posted on wrong thread

 

[USMCotaku]

Oops, wrong thread... Stupid tapatalk
Sent with one hand, the other is busy vaping.

 

[Msand]

Just received vape mail! Subtank mini! I will let everyone know if i have connection issues. Right now, just trying out the kanthal coil so i will know how the Ni 200 compair.

Sent from my SPH-L720 using Tapatalk

 

[puddinman]

Ok so help me get something technical straight. My assumption was that the Evic "atomizer lock," or whatever was simply locking in the cold ohms reading into the equation it uses calibrate the ohms to temperature scale.

Is that not what is happening?

 

[puddinman]

Just received vape mail! Subtank mini! I will let everyone know if i have connection issues. Right now, just trying out the kanthal coil so i will know how the Ni 200 compair.

Sent from my SPH-L720 using Tapatalk

That is a nice looking setup!