Just a beginner

[BuMzzzz]

Hi guys.. i have a PICO 75w starter kit the coil was rated at 0.35ohm for 0.3 ohm 0.65ohm on 0.5ohm coil heads is this normal.? The EC heads engraving says 0.3Ω or 0.5Ω only, is this just the round off.? Im using the eleaf EC heads 0.3 and 0.5 for the melo 3 mini tank.
Thanks guys and more power to ECF

 

[opticruby]

0.35ohm is a good close resistance, the 0.65ohm I would make sure the connections are clean and tight, if it really wants to stay at 0.65 I wouldnt worry too much.

Its common for coil ohms to be slightly off.

Also welcome to ECF.

 

[Zutankhamun]

Welcome

If it's off a little and stays the same I wouldn't worry.

If it is flicking around a lot do what opticruby says and make sure things are clean, well fitted and tight enough.

 

[BrotherBob]

Hi guys.. i have a PICO 75w starter kit the coil was rated at 0.35ohm for 0.3 ohm 0.65ohm on 0.5ohm coil heads is this normal.? The EC heads engraving says 0.3Ω or 0.5Ω only, is this just the round off.? Im using the eleaf EC heads 0.3 and 0.5 for the melo 3 mini tank.
Thanks guys and more power to ECF

Welcome and glad you joined. .3 and .5 are nominal ratings only, not meant to be exact. Hang in there.

 

[Sugar_and_Spice]

Hi guys.. i have a PICO 75w starter kit the coil was rated at 0.35ohm for 0.3 ohm 0.65ohm on 0.5ohm coil heads is this normal.? The EC heads engraving says 0.3Ω or 0.5Ω only, is this just the round off.? Im using the eleaf EC heads 0.3 and 0.5 for the melo 3 mini tank.
Thanks guys and more power to ECF

Ditto on what the others have posted. Eleaf also makes a coil for the melo you can coil and wick yourself. It is called Eleaf ECR heads. They come with coil inserted and with some wire and cotton and just follow directions. The coil is at 1.0 ohm but you can put other coils of different ohms if you like. Saves loads of cash redoing them yourself and its super simple.
Do a google search on how to build an ecr coil and then watch others while they teach you.