KAMRY X6 Tank questions, .....es, whines

[WallyO]

OK got my X6 in today. How the "H E double hockey sticks" is this lower tank supposed to come apart???? I have a feeling it's pressed together. If that's the case this will be in the bottom of my box by the end of the day. I have marred and mangled this one up enough allready to make it look like it rolled down the highway and fell off a cliff.
Other bad news for me...The top cap is a different threading than the splitfire so a swap to there is a no go. Too bad. This top cap design looks like it would work awesome.
The heads are slightly different but it looks like they will work in the splitfire just from appearances.
What a shame. This unit is just about 1/4" shorter than a SplitFire and is a bit lighter.
If anyone figures out how to get the lower tank apart without destroying it, please let me know.

 

[badkolo]

you fill through one of the holes
you dont remove the tank, washing it is a little pain, but it performs well, it isnt ... user friendly as i would of liked. thats why we got a limited amount, but it does come for free in the kit and performance wise its good and easy to rebuild coil but the tank not being removeable makes rewicking through the.holes a little pain, i informed them and will see what they can do.

 

[WallyO]

you fill through one of the holes
you dont remove the tank, washing it is a little pain, but it performs well, it isnt ... user friendly as i would of liked. thats why we got a limited amount, but it does come for free in the kit and performance wise its good and easy to rebuild coil but the tank not being removeable makes rewicking through the.holes a little pain, i informed them and will see what they can do.

A little pain????? There is no way I can do a SplitFire without pulling the wicks down with tweezers from the bottom. Its really a piece of work that should have never made it off the sheet of paper.
Sorry. I hate criticizing, but this one truly deserves it. I'm and And double peeved that at least that cap can't be used on the SplitFire's.

 

[badkolo]

not at all wally
i agree and pointed it out as well when i played with it, initaly filled it and its winner as is, but then chanigng the wick and cleaning the tank, a little pain , so ill see what can be done

 

[rdsok]

... not to mention that constructive criticism leads to improvements in a product...

 

[zippersnapper]

it isnt ... user friendly

Gee, I certainly hope not...

 

[Teach]

Sad to hear this - got mine this morning and have been using it all day - definitly like the size and vape. Not being able to disassemble the tank is going to be a problem though.

 

[Adrena]

Sorry Wally someone had to, shame I was looking forward to this one...

 

[AG51]

Gee, I certainly hope not...

zippey

 

[VapingTurtle]

But Wally, the KTS is soooo SHINY, you should even notice the tank.

 

[WallyO]

But Wally, the KTS is soooo SHINY, you should even notice the tank.

I only bought the tank. But I did notice the top was shiny. But believe me, I won't notice it anymore. Outasight outa mind.

 

[badkolo]

wally i got you covered, your family so you know not to worry, i got extra x6 for ya and im talking to kamry as we speak, they have their own menthod for inserting the wick but i let them know what we want and what our customers expect in a tank, yes the x6 vapes very very well but we need it to disasemble, now the ktx , its incredible to me in every way, work well and all that jazz

 

[WallyO]

wally i got you covered, your family so you know not to worry, i got extra x6 for ya and im talking to kamry as we speak, they have their own menthod for inserting the wick but i let them know what we want and what our customers expect in a tank, yes the x6 vapes very very well but we need it to disasemble, now the ktx , its incredible to me in every way, work well and all that jazz

Bad, also please convey to them that I for one am done with filling with syringes. No excuse not to be able to fill anything straight from the bottle. No muss no fuss on the splitfires. Unscrew the top. pour it in, screw it back and you are good to go. Even the Vision Nano is awesome for this. this was an exceptional design thought. Unscrew the tip, drip down the post and you are done.

Also inform them that NR legs on their coils are a necessity with this one also. Mine had a nice bright appox 1/8" hot leg I noticed when doing a pre use dry burn. I disassembled to confirm, it is all resistance wire. Most everyone else is doing this now, I was kinda surprised to not see NR legs on this one.

Also let them know they need to get all this stuff right the first time. Because by the time they get a revised unit out someone else will have cloned it right. Besides the fact that vapers as a whole are getting fed up with some of these half hearted attempts coming out of some of these factories.

Thanks for listening.

 

[badkolo]

yes, i just copied it to them, they got the ktx Tmod right and basicly the x6 is included without much of a additional charge to us, so i wasnt going to make a stink initialy, but the tank was suppose to be removable on the main order of x6, its being handled and ill report back,

 

[AG51]

Thanks Bad I like the looks of that tank too

 

[WallyO]

yes, i just copied it to them, they got the ktx Tmod right and basicly the x6 is included without much of a additional charge to us, so i wasnt going to make a stink initialy, but the tank was suppose to be removable on the main order of x6, its being handled and ill report back,

Thanks Bad. I appreciate the fact that these thoughts and findings do indeed get to the manufacturer.
Keep on doin what you're doin'.

 

[orbach]

All this talk about wines and .....es really attracted my attention. Slow Sunday over here...

 

[AG51]

All this talk about wines and .....es really attracted my attention. Slow Sunday over here...

Pretty Slow Sundays at my light business too Orbachs

 

[orbach]

oh oh, i thinks monkey mama has somethings in mind...

Pretty Slow Sundays at my light business too Orbachs