Kanager Pro glass bottom coil Tank coming after the holidays !!!!

[Harplayr]

My juices have stayed the same mostly, I have done the wick removal on most all my tanks similar to these, but I suppose because the juice can be different that one may want to do a test

Yup,
I vape some thin juices and some thicker juices. I try to keep the same juice with the same base as some work best with all the wicks installed and others vape best with a strand or so removed.

I wish it were an exact "one size fits all" solution, but if it exists...I haven't found it yet.

 

[Briar]

Yup,
I vape some thin juices and some thicker juices. I try to keep the same juice with the same base as some work best with all the wicks installed and others vape best with a strand or so removed.

I wish it were an exact "one size fits all" solution, but if it exists...I haven't found it yet.

Yeah... Maybe they should make a couple of variants of the same coil, for people like me who are pathologically lazy and busy. I find myself going back to my "bad old" habits of not cleaning the coils. I have, like, 25 of them waiting to be cleaned and I just keep buying the new ones, since they are cheap. With a half way clean-burning juice, a head lasts me a week with pretty heavy vaping. And I really don't want to be pulling wicks... I do it, but I don't want to.

I bet lots of people are like that out there. Variant heads, I say, variant heads!

Cheers,
Briar.

 

[keelalagirl55]

wheeee! Can't wait!

 

[killa44128]

Man O Man I cant wait to get one of these pro tanks in my hand! Gotvapes is problably one of the main venders I get all my toys from because of there customer service and there quick shipping! My last order i got in less than ten days! And my address is a overseas military address (APO AE) alot of other venders i order from takes almost a month

 

[jfountain2]

I was going to order the Vapeonly tank till I saw the Kanger Protank.... I pre-ordered the Protank last Friday..... can't wait for it to get here.

 

[badkolo]

shipping to us in a day or so

 

[rdsok]

I was going to order the Vapeonly tank till I saw the Kanger Protank.... I pre-ordered the Protank last Friday..... can't wait for it to get here.

GotVapes is expecting the Pro Tank in this month... but they do not have them available as a pre-order ( this is the GotVapes forum area btw and not a general forum area )

 

[Harplayr]

shipping to us in a day or so

Shipping to me the day it drops on your site

 

[kwcharlie]

you better be getting a bunch of these Bad Clown! This frog may kiss into something better than a new hat

 

[badkolo]

3000 ordered

 

[Cyric]

Was just searching around for a place to buy one of these, cant wait to get my hands on one!

 

[Debadoo]

I am excited to try this. But what do y'all think about what Phil said about dry burning being hard to do since you can't see the coil very well. That looks thinner than the ce3's but am I correct in assuming you have just the tube on the device and are looking down that metal shaft thingy to see something glow?

 

[jfountain2]

GotVapes is expecting the Pro Tank in this month... but they do not have them available as a pre-order ( this is the GotVapes forum area btw and not a general forum area )

My apologies for posting in the wrong thread. I'll leave y'all alone

 

[Darkstrike]

Just watched Paul's YouTube review of this and it looks like it's gonna be 510 threaded. Is this true? I thought you needed an adapter to use a Kanger on a provari. Or am I completely wrong lol!

 

[Harplayr]

I am excited to try this. But what do y'all think about what Phil said about dry burning being hard to do since you can't see the coil very well. That looks thinner than the ce3's but am I correct in assuming you have just the tube on the device and are looking down that metal shaft thingy to see something glow?

I don't agree with Phil on this.
He said the tube separates from the coil base to be able to remove one of the top wicks just like on a T3. If this is the case, just remove both top wicks and you can see the coil for dry burning just like you can on the T3

 

[Harplayr]

Just watched Paul's YouTube review of this and it looks like it's gonna be 510 threaded. Is this true? I thought you needed an adapter to use a Kanger on a provari. Or am I completely wrong lol!

Just guessing here but, unlike the T3 and EVOD this looks to be 510 and I expect it to work on 510 and ego threaded devices without needing adapters.

 

[Debadoo]

Thanks harp! Didn't seem like it would be that hard to do, but since I haven't seen any of these types yet, I wasn't sure. Just ordered an evod to tide me over. lol

 

[zippersnapper]

I don't agree with Phil on this.
He said the tube separates from the coil base to be able to remove one of the top wicks just like on a T3. If this is the case, just remove both top wicks and you can see the coil for dry burning just like you can on the T3

"I agree with you..rebuilding should be simple. I was hoping PB would see if any issues arose with using eVod heads on the ProTank, but he left that out..

 

[Harplayr]

"I agree with you..rebuilding should be simple. I was hoping PB would see if any issues arose with using eVod heads on the ProTank, but he left that out..

That's a good question. They "look" about the same, but the Pro did have a longer tube. It'd be great if you can just pop the appropriate tube on and use the same coil.

 

[zippersnapper]

That's a good question. They "look" about the same, but the Pro did have a longer tube. It'd be great if you can just pop the appropriate tube on and use the same coil.

It didnt even dawn on me to do that...Your right, I bet you can....