Kanger coil confusion

[dhdaniel]

hello Group, Not sure where to post this, so Here goes,

I've got several Kanger type coils and parts in my collection
I own 1 Protank and 1 Mini PT
I've bought a couple coils from local B & M,
so I'm really unsure what came from where
In this pic you can see 2 different coils, At first glance they appear the same,
But the one on the left has a smaller Inside & outside diameter, and also the outer ring on the bottom piece is smaller in diameter.

I'm kinda confused here. Does any of this even matter?
I can tell that larger has better air flow, naturally.

thanks for any info

Dave

 

[Ace90]

At first I thought maybe it could just be the ohms difference but I checked the coils I have for my Kanger (I have some 1.5 and some 2.2) the holes look the same size. So maybe it just a defect in the coil ? If it still vapes fine then I would assume it doesnt really matter but I cant 100% sure....

 

[DavidOck]

The smaller diameter one is for a T3S, but should work fine in your PT and mini. Should you get a T3S, the larger diameter ones will NOT work in it.

 

[Huckleberried]

I have both and build on both. I've used them in a Protank 2, mini Protank 2 and the Smok Aro 2 with no issues.

 

[BigCatDaddy]

hello Group, Not sure where to post this, so Here goes,

I've got several Kanger type coils and parts in my collection
I own 1 Protank and 1 Mini PT
I've bought a couple coils from local B & M,
so I'm really unsure what came from where
In this pic you can see 2 different coils, At first glance they appear the same,
But the one on the left has a smaller Inside & outside diameter, and also the outer ring on the bottom piece is smaller in diameter.

I'm kinda confused here. Does any of this even matter?
I can tell that larger has better air flow, naturally.

thanks for any info

Dave





View attachment 346401

The one with the bigger ring is the correct one for your tanks but as others have stated, both will work in them. You gotta watch those fools at the vape shops!!

 

[Killowatt]

The left one looke like my older evod heads, smaller hole. Pt heads are the newer large holes. Don't know about the other tanks.

Sent from my SCH-I535 using Tapatalk

 

[Huckleberried]

Oh yeah. Forgot the Evod. I've used it in those, too.

 

[DavidOck]

BTW, if you prefer the air flow from the one with the bigger ID chimney, they're interchangeable.

 

[Flavored]

hello Group, Not sure where to post this, so Here goes,

I've got several Kanger type coils and parts in my collection
I own 1 Protank and 1 Mini PT
I've bought a couple coils from local B & M,
so I'm really unsure what came from where
In this pic you can see 2 different coils, At first glance they appear the same,
But the one on the left has a smaller Inside & outside diameter, and also the outer ring on the bottom piece is smaller in diameter.

I'm kinda confused here. Does any of this even matter?
I can tell that larger has better air flow, naturally.

thanks for any info

Dave





View attachment 346401

You should go here: http://www.e-cigarette-forum.com/fo...t-freebie-limited-supply-24.html#post13427830 . . . join CASAA (they're helping us keep our right to vape), PM me, and I'll send you a few coils that I've installed micro-coils in wicked with cotton or rayon. It'll change your vaping experience tremendously for the better.

 

[jstjoehere]

I have a t3s and an aerotank. Ive tried the t3s coils in the aerotank and it seemed to work ok but I read that if I want to use a single coil in my aerotank to use the protank 2 coils. They seem to work well and I rebuild them also.