Kanger Protank mini 2 leaking?

[TiyahLove]

I just got my kanger protank mini 2 last week and I have had no problems with gurgling or clogging, but my e liquid is leaking out of the tank. It isn't leaking into my battery or anything it's leaking out of the part that's at the bottom of the tank where you screw the two pieces together (I forgot what it's called. Oops)
has anyone had the same experience? How do I fix it?

 

[BeRight]

This hasn't happend to me - my guess is that maybe the really small gasket/seal at the bottom of the threads of the bottom section is defective.

 

[karcirate]

I've been having the same issue. It's not a fast leak, so not a huge deal, but every half hour or so some juice will have oozed out between the base and the metal ring on the bottom of the glass. It seems to me the o-ring on the base could be a little thicker, but that might prevent it from screwing in properly.

 

[Razorback]

That sucks. Keep trying to re-screw it together and hopefully it will seal soon. Perhaps the seal is in a bind or missing?

 

[Cool-breeze]

Something a lot of ppl (myself included) don't realize at first is the mini pt2 comes apart at the top too. Next time it's close enough to empty I'd take it completely apart and clean it. I suspect it's the top part that's loose but many many times I've been frustrated with a tank leaking and a good cleaning/ couple hr soak resolved the issue. Good luck.

 

[kczar]

Since it has happened to me, I think maybe you lost an o ring. One of the little ones that they don't give you spares for. On line, buy a 5 pack of spare o rings. If you want to figure out if you are missing an o ring, go on line and watch a video on the protank 2 mini that shows all the parts and pieces.

 

[Lurch]

Also, make sure your coil is tight. For some reason my wife's coil gets loose whenever she opens it up to fill. It can cause a leak and missed hits...

 

[wraithxiv]

I second Cool-breeze and Lurch. My wife and I have a mini protank 3's. My wife had the issue with the top cap not being on tight enough and causing leakage, and I had the issue of my head not being tight enough causing leakage. If your leakage is near the base I would check and see if your head needs tightening, if so start checking for missing o-rings like kczar suggested. Another thing to keep in mind, while you are vaping, make sure you aren't covering an air hold with one of your fingers. This causes pressure to build up in the tank and will also cause the leakage back though the air holes.