KangerTech identification... real or fake?

[ynots]

I recently bid (eBay) on 10 EVOD tanks. After placing my bid I looked at a picture the seller provided and none of the tanks had any logo's. I have purchased Kanger products on 5 different occasions, ie: batteries, protanks, clearomizers etc... and all of the items came with a logo.

So the question is fake, or not fake, does KangerTech put their logo on all their items?

The seller advertised them as being a Kanger product, I do not want to pay top dollar for someone's cheap imitation's

Long at lingering, newbie at posting... sorry if this is the wrong section.

Tony

 

[Sthur]

The mt3 doesn't look like they have a logo on them. See link.

Kanger MT3 eGo B/C Clearomizer

Evod's don't either. Kanger EVOD eGO Bottom Coil Clearomizer

T3s do. Kanger T3s Rebuildable Clearomizer 2.5ohm

You should be good. If they work is all that matters happy vaping.

 

[Zoom]

If it looks wrong error on side of caution. I always worry about that fakes on eBay but some brick and nortor shops sell them too. I do my research and don't leave it to chance check his feedback may help. I think you get what you pay for I'd rather pay more and get the real thing. Just my feelings. Good luck and welcome.

 

[ynots]

I agree, the EVOD tanks I purchased on 3 different occasions had logo's on them. The items sre EVOD not MT3 if it makes a difference...?

 

[Vchick]

My evod tanks have evod bcc on them and the bases say Kanger Tech on them. hth!

 

[DrBeaker]

I love kanger products! I have a few some are branded some are not.

 

[Sthur]

Thanks ynots quick search didn't pop that up. Still looking for mt3 if any have logo.

 

[ynots]

Thanks everyone. I purchased 4 MT3 tanks that didn't have any logo's (haven't had a chance to try them). I was surprised to see the installed coils all had a shorter tube than the EVODs I have previously purchased. I haven't tried swapping the coils with my EVOD ones to see if they work. I just always like knowing what Im getting with my money

Tony

 

[meanckz]

Either way...once you get new coils for them make sure those are Kanger...if the quality of the tank is at least similar to Kanger tanks and adding a Kanger coils, I think you'll be fine

Kanger ProTank & Evod Coil Replacement **5 Pack - 2.2 ohms

 

[Jovinho]

I realise that the ohms varies everytime I put the tank on my eVic. is it because I have fake coils or?

 

[negroplz]

IIRC (if I remember correctly) legit Kanger EVODs have 3 air holes around the base. Clones have only 2 air holes.

 

[athousandyears]

I have 2 evods, both have 3 air holes but only one is branded. I bought them both from the same vendor at the same time. The only other difference is that one is black and one is red. Weird.

 

[jocat54]

My Evod has "Kangertech Evod" on it with 3 air holes, my evod clone has 2 air holes with no writing.

Almost threw both in the trash when I got them, they leaked badly and gurgled. Same with the replacement coils. I then did the micro coil with cotton wick (no flavor wick) and what a difference they are my adv now. They both work the same --original and the clone.

 

[ynots]

I think I'll just stick with purchasing kangertech branded coils. One thing that I have noticed on 3 different occasions when purchasing EVOD's (online) is the equipped coils are advertised as being 1.8 ohm and they had 2.5 ohm coils in them. Any recommendations on which ones to use for vaping with 3.8 volts? I didn't really want to buy a 5 pack of coils (1.8ohm) and find out I don't like the vape