in the first picture are the wick tails laying on the wick deck or are they coming up into the chimney? its hard to tell as something is broken with the first image.. thanks again for the post!
Kayfun lite plus black clone edition
- Thread starter bignrichie
- Start date
- th_trl_thread_readers 0
- Status
in the first picture are the wick tails laying on the wick deck or are they coming up into the chimney? its hard to tell as something is broken with the first image.. thanks again for the post!
They are laying on the deck. What I have found works the best is to position the tails where you want them and pinch both of them together with one hand and then slip the chimney over them and screw down. Ready-x is hard to bend really tight and makes it hard to tuck them on the deck after putting the chimney on. Just noticed I need to straighten that coil before I fill and use it again. I drained and cleaned tank to take photos and must have screwed up the coil while torching the wick. If it gives you any idea how well the wick cleans up the juice in that tank was "Custards Last Stand" from Nicoticket (Dark, Sweet, and Delicious!!!)
crap sorry man, didnt want to make you mess up your rig! thanks again! the vapingreek did a build where he had 2 strands stuck in the coil with a set of tails going up into the chimney and two going to the deck.. he used eko/silica combo here tho as he doesnt like xc..
No worries. Not a big deal. Probably needed to be refreshed anyway. Sweet juices can gunk up a coil but they taste great!! Besides I think sometimes I enjoy the tinkering on stuff almost as much as Vaping!!
so whats this "silver Edition" kayfun? I saw a few pages back that 101vape kayfunlite+ clone is the silver edition? Reason i asked is that im about to place my order on the hcigar clone and that their kayfun clones are silver edition. I was gonna get the black edition but people her are saying "shallow juice channels"
Wick is too short, leave the tails longer and pull them upward..screw chimney on and tuck them around the juice channels.
To the folks who's got the black edition clone, does anyone know if it sits flush with a provari?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
With a beauty ring yes it does. Adjustable 510 connection
Sent from my Nexus 5 using Tapatalk
Sent from my Nexus 5 using Tapatalk
Is that the black edition clone? I read through this whole thread and there were a number of complaints about the juice channels being to shallow. It doesn't look the case though
Sent from my iPhone using Tapatalk
I have the tobeco clone latest edition which looks a lot like the black and silver edition. I had dry hits off and on.. I took it apart for cleaning and did a little vacuum test and found it would not hold a vacuum. I put a piece of Teflon tape around the airflow screw and no more dry hits. I use 100% vg so I need the all the help I could get... Hope this helps some!!
Last edited:
Isn't the silver editon the same thing? With just a eBay seller adding silver edition?
I plan on taking the airflow control screw all the way out... Guess that will cause a vacuum issue
Sent from my Nexus 5 using Tapatalk
I bought 2 of these black editions. One has nice deep juice channels and worked like a dream from the start. The other one had shallow channels that didn't connect. It gave nothing but dry hits until I took the dremel and fixed the juice channels. It seems to be the luck of the draw with these.
So is there any clone/version, from any vendor, that always has the correct, non-shallow juice channels? My "black edition" has shallow channels. My stainless steel KFL plus from fasttech has shallow channels. The "Silver Edition" (which happens to have that matte gray finish, which I like but doesn't really compliment any of my mods, but whatever) has the "right" channels and works GREAT.
Thats a known problem with tobeco clones unfortunately. Hit or Miss.
Isnt the "Silver edition" tobeco as well?
i recently got the kfl black edition, i did all the whistle fix listed here. i even aligned the air hole in the center post. i am still getting the infamous whistle. anyone else got a different fix for this?
yes the EHpro has deeper channels just like the real one heres a link to the comparing thread by Spazmelda
http://www.e-cigarette-forum.com/fo...ms/515492-side-side-pics-kfl-ehpro-clone.html
Unfortunately, the most impt thing to me is the real adjustable 510 connection (I'm .... about my toppers sitting flush). Seems like the black edition is the only one with it
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Status
Similar threads
- Locked
