Kayfun Lite Plus (CLONE), 4 juice channels.
- Thread starter skittles2978
- Start date
- th_trl_thread_readers 0
- Status
I didn't look at the picture or read enough of the thread lol. Looking at the picture... Yeah, don't want that. Twisted 40 had one that looked identical to the original, just with the 4 channels and said it was great. That's the one I'm after
I bought the Russian 91. It was pricey, but the guys (Rip, Todd, Grimm) were right its a great piece and I love it
Agreed, really tempted to get the limited polished Russian 91% they have up right now
4 channels??? seems excessive when 2 work just fine... only thing that needs more than 4 channels is my TV....
An Update on this thread
My apologizes to Onlinevapes (Ebay), they realized they had a few bad ones in their shipment, and they made it right with me, and in doing so, i bought another from them, got it today and its great, If i had a use for more i would buy from them, and i again im sorry for the bashing statement i made, i just thought i was dealing with another shady one from Ebay, but as i said these guys stand behind their products, If your looking for a good kayfun lite, Go check them out on Ebay,
My apologizes to Onlinevapes (Ebay), they realized they had a few bad ones in their shipment, and they made it right with me, and in doing so, i bought another from them, got it today and its great, If i had a use for more i would buy from them, and i again im sorry for the bashing statement i made, i just thought i was dealing with another shady one from Ebay, but as i said these guys stand behind their products, If your looking for a good kayfun lite, Go check them out on Ebay,
are they really charging 150$ for them? the real deal is only like 100$ is there a typo in their ebay page??
I just got one of these 4 channel clones from ebay (sparks NV) I forget the sellers name. It comes in a Kayfun box and has the logos on the bottom but it's def not a real one. The air flow adjustment is on the side too.
I've been messing with it for a while tonight. I want to take it to work with me but right now I don't know for sure if it's going to not flood on me sitting in my pocket.
At first I did a micro/cotton build but the throat hit was too much for me. I don't use cotton very often and I think I had too much in the coil, or cotton is just not for me.
The build quality is pretty good, had spare orings and comes with a screw driver. I think I'd be happier with it if it was stated that it was not a real one.....but I kinda knew due to the price that it was a clone.
Right now I have two 2mm pieces of silica wrapped with 30ga kanthal at 1.3 ohms so I have a piece for each channel. so far no leaks or gurgles, but I have not had it on it's side for a long time yet either. The flavor is pretty good, better than a protank, not as good as a dipper, but closer to the dripper than the protank. I still prefer gennies to my drippers though even though the flavor is not quite as good, but they don't fit well with my job. I also have the airflow screew removed from the Kayfun clone and I wish it was a bit more airy, but it's not bad.
I've been messing with it for a while tonight. I want to take it to work with me but right now I don't know for sure if it's going to not flood on me sitting in my pocket.
At first I did a micro/cotton build but the throat hit was too much for me. I don't use cotton very often and I think I had too much in the coil, or cotton is just not for me.
The build quality is pretty good, had spare orings and comes with a screw driver. I think I'd be happier with it if it was stated that it was not a real one.....but I kinda knew due to the price that it was a clone.
Right now I have two 2mm pieces of silica wrapped with 30ga kanthal at 1.3 ohms so I have a piece for each channel. so far no leaks or gurgles, but I have not had it on it's side for a long time yet either. The flavor is pretty good, better than a protank, not as good as a dipper, but closer to the dripper than the protank. I still prefer gennies to my drippers though even though the flavor is not quite as good, but they don't fit well with my job. I also have the airflow screew removed from the Kayfun clone and I wish it was a bit more airy, but it's not bad.
Okay they changed it lol. No clue why it was showing 150$!
Look at this on eBay:
Kayfun Lite Clone RBA Rebuildable Atomizer Tank - HIGH QUALITY - FREE SHIPPING!
http://......./1cxKOOH
Look at this on eBay:
Kayfun Lite Clone RBA Rebuildable Atomizer Tank - HIGH QUALITY - FREE SHIPPING!
http://......./1cxKOOH
I ended up with one of the 4 channel clones, stripped the fill screw head the first night. (Screw made of brass and wouldn't come out...) Got a Russian 91 and love it. I'm going to use the kayfun clone as a dripper. For that it does pretty well!
Hi Everyone, a few of you were asking the sellers name, the place I got mine from was "kayfunvape14", the seller as it reads on my paypal statement is "samir el-chammas". I don't think he's been selling for very long under the kayfunvape14 name as there was only a 35 feedback score. Item came on the day it was supposed too, but I didn't not get any shipping notifications via email.
The clone works great though, just need to make sure you get wicking material over both channels. I'm on my 3rd build, this time going old school with 6mm of silica at the coil (3 2mm wicks) and only one piece going into the bottom of the deck. I like it like this. The cotton and I don't seem to get along, I need a coil to last 5 days so I can play with it on my days off and the cotton doesn't seem to want to go that long. Next I tried a micro with silica, but as expected the silica can't keep up like cotton so I was getting dry hits after a few back to back pulls. With the way it is now I don't get any dry hits and the deck is not too cramped up with wick.
It's no cloud machine but wasn't purchased as such, still the vapor production is more than a drilled out protank. The flavor is great even on silica. I mainly got it to have a non-leaking RTA for work and for that purpose it's been great.
The channels are deeper than the real one, or the single channel clones. I make my own juice at a 50/50 and it's wicking really well. To me the base looks like the Aqua, but with only a single air tube. I have not yet tried dual coils on it and don't think I will, too much trouble for me. If/when I get another one I"ll probably get one with the single channel to see the difference. If that one works great too (too many great reviews to think otherwise) then I"ll drill this one out and make a dual coil set up.
So far I like it better than the Terminator since I don't need to mess with NR wire, but I think the build quality on the Term is better. The threading on this one is not bad but not perfect either.
If your having leaking issues most likely it's not sealing properly at the top cap, or the channels don't have enough wick in them. The other issue could be that you have too much juice on the wicks when you put it together which is what I was dealing with. This one works off of pressure, when you take a hit the juice moves in until the pressure is equalized. If the wicks are too wet and the coil did not burn off enough juice then the juice can't go to the wicks, it goes out the air hold, or just gurgles. If you KNOW you are sealed up right then burn off some of the primer juice until the wicks are not as saturated and button it up, it should work great. Wicks can lay directly over the channels, just don't put wick in them.
If anyone needs any help just PM me, I"m not on everyday but I try to log in at least every few days. Gota give back to the community that gave me so much!! Just celebrated a year without cigs, never though that could happen!
The clone works great though, just need to make sure you get wicking material over both channels. I'm on my 3rd build, this time going old school with 6mm of silica at the coil (3 2mm wicks) and only one piece going into the bottom of the deck. I like it like this. The cotton and I don't seem to get along, I need a coil to last 5 days so I can play with it on my days off and the cotton doesn't seem to want to go that long. Next I tried a micro with silica, but as expected the silica can't keep up like cotton so I was getting dry hits after a few back to back pulls. With the way it is now I don't get any dry hits and the deck is not too cramped up with wick.
It's no cloud machine but wasn't purchased as such, still the vapor production is more than a drilled out protank. The flavor is great even on silica. I mainly got it to have a non-leaking RTA for work and for that purpose it's been great.
The channels are deeper than the real one, or the single channel clones. I make my own juice at a 50/50 and it's wicking really well. To me the base looks like the Aqua, but with only a single air tube. I have not yet tried dual coils on it and don't think I will, too much trouble for me. If/when I get another one I"ll probably get one with the single channel to see the difference. If that one works great too (too many great reviews to think otherwise) then I"ll drill this one out and make a dual coil set up.
So far I like it better than the Terminator since I don't need to mess with NR wire, but I think the build quality on the Term is better. The threading on this one is not bad but not perfect either.
If your having leaking issues most likely it's not sealing properly at the top cap, or the channels don't have enough wick in them. The other issue could be that you have too much juice on the wicks when you put it together which is what I was dealing with. This one works off of pressure, when you take a hit the juice moves in until the pressure is equalized. If the wicks are too wet and the coil did not burn off enough juice then the juice can't go to the wicks, it goes out the air hold, or just gurgles. If you KNOW you are sealed up right then burn off some of the primer juice until the wicks are not as saturated and button it up, it should work great. Wicks can lay directly over the channels, just don't put wick in them.
If anyone needs any help just PM me, I"m not on everyday but I try to log in at least every few days. Gota give back to the community that gave me so much!! Just celebrated a year without cigs, never though that could happen!
I purchased a Kayfun Lite + and received the 4 juice channels and it works fine with a bit of ingenuity.
Not a single flood, dry hit or problem and I've ran about 10 tanks through it, including 60pg/40vg, 50pg/50vg and 98vg/2pg juice without any issues.
I'm using a microcoil @ 1.8 Ohms, with a relatively thick cotton wick split in 2 at each end to fill the channels, I let the cotton touch the base of the channels and just slip under the chimney section.
Dab the cotton with juice and use a small screwdriver or toothpick to align the wick with the channels and bobs your uncle!
Not a single flood, dry hit or problem and I've ran about 10 tanks through it, including 60pg/40vg, 50pg/50vg and 98vg/2pg juice without any issues.
I'm using a microcoil @ 1.8 Ohms, with a relatively thick cotton wick split in 2 at each end to fill the channels, I let the cotton touch the base of the channels and just slip under the chimney section.
Dab the cotton with juice and use a small screwdriver or toothpick to align the wick with the channels and bobs your uncle!
Think I'm about to purchase the EHPro Kayfun lite. What kind of wick and coil set up are you using? I'm using a ss mesh wick with 32 twist wire 4/5 wrap in my ihybrid pure now. Don't have a big assortment of wire and wick materials and trying to figure out whether to order anything else.
I would suggest getting some cotton if you're planning on purchasing a Kayfun, plus maybe some 30 or 28 gauge Kanthal for microcoil building depending on whether you're using a VV/VW mod or a mechanical mod.
I'm using a 30 gauge kanthal microcoil @ 1.8 ohms, with cotton wick, works great the only downside is having to change the wick every 2 tanks or so but so far not a single flood or dry hit.
I'm using a 30 gauge kanthal microcoil @ 1.8 ohms, with cotton wick, works great the only downside is having to change the wick every 2 tanks or so but so far not a single flood or dry hit.
Change it every two tanks, really? I might just stay with the SS mesh then, ran at least 10 or 12 tanks through it and still works great. At about the end of the second tank I'll dry burn it and it's good to go and taste great.
Yeah thats the downside to cotton wick unfortunately, whatever sails your boat mate when it comes to your preferred wick. I'm sure there are some tutorials on wicking a kayfun with mesh! Happy hunting
I've had many frustrating hours trying to get get mesh working in a genny and eventually gave up on it for cotton/silica.
I've had many frustrating hours trying to get get mesh working in a genny and eventually gave up on it for cotton/silica.
- Status
Similar threads
- Locked
