Kayfun Prime Easy Box

[vapingpilot21]

Hello to everyone.
Yesterday I purchased the Easy Box SBS by Ambition Mods and I immediately tried to match it with my favorite, kayfun Prime. It seems though that the 510 pin on the KP is too short and combined with the fact that the pin on the mod has very short travel, the mod itself, wont read the KP coil. I tried loosen the 510 pin on the KP but it just got the whole deck loose even with half a turn. Any thoughts or advices will be highly appreciated.
Thank you in advance.

 

[smacuser]

The only thing I can think of would be to get a 22mm 510 Adjustable Heat Sink. Though, the odds might be the throw on any contact could be the same.

 

[UncleJunkle]

If your KP pin is protruding at least 1mm from the threads, and if in fact the problem is the pin not contacting with the Easy Side mod pin, then I say return it. If it can't accommodate a KP pin then it can't accommodate a plethora of other tanks either.

 

[evan le'garde]

I had a similar problem with a K4 fitting a Provari. I got a small o ring and fitted it round the screw then gently tightened the screw back on. Worked like a charm.

I found the o ring on one of those little metal screwdrivers you might get with hardware sometimes.

 

[vapingpilot21]

oh thats great Evan! thanks!

 

[evan le'garde]

Let me know how you get on.