kbox mini platinum + Aspire V2

[TraceKira]

Dear all i switched to this Temperature control KBox Mini Platinum 7-60W with 0.5 Ohm Titanium coils and an Aspire Atlantis 2 tank on top (and 12 mg nic juice)

On the cooil it doesnt says which watts shall i use (i selected randomly 25 w). I set temperature to 160 degree celsius

Can someone tell me what wattage shall i use and if 160 C temperature is OK ?
I cant tell if the taste is right at the moment (tabbaco juice)

 

[suprtrkr]

Dear all i switched to this Temperature control KBox Mini Platinum 7-60W with 0.5 Ohm Titanium coils and an Aspire Atlantis 2 Tank on top (and 12 mg nic juice)

On the cooil it doesnt says which watts shall i use (i selected randomly 25 w). I set temperature to 160 degree celsius

Can someone tell me what wattage shall i use and if 160 C temperature is OK ?
I cant tell if the taste is right at the moment (tabbaco juice)

That's about 320degrees F, and it's lower than I use in TC mode. I'm usually 400-450 (200-230C). It doesn't matter much, so long as you like the vape. Higher temps will produce more and warmer vapor, lower the opposite. Neither is the watts setting important so long as you get vapor soon after you push the button. If you find you have to wait to get vapor out of it when you push the button, raise the watts. The machine uses your temp setting to make the vapor, it only see the watts as like a speed limit, a "do not exceed" value. Once the wire reaches whatever temp you set, the machine backs off the power to keep it there and not let it get too hot. Also FWIW, 12mg is stiffer juice than I would use subohming. If you raise the temp much more, you might find yourself getting lightheaded from too much nic. In that case, cut down to 9 or 6 mg.

 

[TraceKira]

Ok i found watts i set doesnt matter, the machine always uses max 60W of power and then drops if i press too long.at