KICK BASS VAPOR Season open! Come wet a carto or atty! (ordering thread)

[chimney55]

ok, I have a question for you hidey holers, I'm looking for a joose that isn't sweet. My sister has started vaping and I vape sweet. She literally gags with sweet so I am not sure what to suggest to her. Im hopping you all can help

She has tried my waffle, I felt it was the least sweet thing I had, she said she could vape that. I also have a small amount of Special K, I'm gonna give her, and everything else I have from here, Mega sweet. She wouldn't try after the first one lol.

Any and all suggestions will be very much appreciated!

Thanks!

Debbie

I find that Auntie M's coffee is NOT sweet. It could also be just me, but I don't find that Bograt is sweet at all.

 

[rkayw]

I rec'd a KBV pkg this weekend. GBC and PIC..nom nom! Thank you very much Skeeter! and you too Bob & Missy for the goodies!

 

[zbasspro]

ok, I have a question for you hidey holers, I'm looking for a joose that isn't sweet. My sister has started vaping and I vape sweet. She literally gags with sweet so I am not sure what to suggest to her. Im hopping you all can help

She has tried my waffle, I felt it was the least sweet thing I had, she said she could vape that. I also have a small amount of Special K, I'm gonna give her, and everything else I have from here, Mega sweet. She wouldn't try after the first one lol.

Any and all suggestions will be very much appreciated!

Thanks!

Debbie

Debbie, my suggestion would be 555, Bogart, or Crossfire Trail with 555 being 1st choice.

Oh I am sorry you started hurting. I'm telling you move to florida, much less pain. I hope you are feeling up to it today.

Thanks Medic, we had a darn frost last night! Don't keep tempting me, I may take you up on that! IDK, if it weren't for Bradley I'd already be somewhere warm, I don't like the idea of uprooting a soon to be teen plus I'd miss Kyle way too bad

Morning Hidey Holers!!

Got vape mail yesterday!! My usual V-spot, Caramel cookie, an my new favorite morning vape....Cafe Latte! Thanks again boB and yissiM!! You guys are the best!!

Busy day for me today....have FOUR ScubagenVs to get built for folks....and didn't send all the parts so I am about to start running all over town to get supplies...

Picked up a new PV last night after selling one of my mods....can't wait to show you guys and gals....and if I'm lucky....the "mod ho" will chime in with her opinon...

Hope everyone is having a great weekend! And hope you had a great b-day Bob!

Thanks UA No complaints, got a K-cup coffee maker which I've always wanted but couldn't see spending that much money on and sold my boat pulling Jeep that has sat for a year so all in all can't complain ;-) I got an old 98 Contour and Tara has an old Kia, her daughter needs a little car so we may trade and I'll use that if I ever get time to fish again.


Yeah on the ST! I'm no Mod HO but that was my 1st mod over a year ago. I really thought it was a good mod but at that time they had those garden hose looking end caps, I sold it but it was a good mod. I have a new 3.7 mini I took in trade but this one I really have issues with my hands not being moist enough to fire it so it's sat for 6 months. A lot will depend on how the switch likes your finger, if it does they're great mods.


rkayw, like I told ya Skeeter did the heavy lifting and the rest was our pleasure



To everyone else, we'll be moving into an addition mid month which will allow for more mixing room and growth and will be down close to a week, I will post those details in the next few days but we may change the ordering days to allow for an extended weekend, I have to sit down and figure when it'll be ready along with how it'll least interrupt things. If I had to give an estimate now I'd say no orders on Friday the 14th but we'll try to take more both before and after to compensate.

 

[medic123]

You are really pushing that two weeks notice you promised me.

 

[UA72Riddle]

Thanks UA No complaints, got a K-cup coffee maker which I've always wanted but couldn't see spending that much money on and sold my boat pulling Jeep that has sat for a year so all in all can't complain ;-) I got an old 98 Contour and Tara has an old Kia, her daughter needs a little car so we may trade and I'll use that if I ever get time to fish again.

We have the Tassimo....and absolutely LOVE it....bute hate how expensive the T-disks are. so it doesn't get used as much as our maker...which also was expensive! (I drink coffee 24-7) our coffee maker is a Capresso Team with conical burr grinder to keep from overheating the beans during the grind....about $300, but I got mine off eBay for half that. It's my alarm clock in the mornings....sounds like a jet taking off!

Yeah on the ST! I'm no Mod HO but that was my 1st mod over a year ago. I really thought it was a good mod but at that time they had those garden hose looking end caps, I sold it but it was a good mod. I have a new 3.7 mini I took in trade but this one I really have issues with my hands not being moist enough to fire it so it's sat for 6 months. A lot will depend on how the switch likes your finger, if it does they're great mods.

This one has the new switch...not sure what they changed, but its supposed to work better since that was a big issue. Most people I have talked to, said they would just lick their finger tips every now and then, and it seemed to help.

As for that mini....we may have to talk about that....


Ok...back to building Scubagens while the paint is drying on my Don....it needed a make over. Sweaty hands and polished metal don't mix to well....I'll post a pick of it with my Genisis Hybrid atty shortly! Hope everyone has had a great weekend!

 

[UA72Riddle]

Before......



After.....

With my BB/ScubagenV3


Sent from my C771 using Tapatalk

 

[ChrisKY]

Morning Hidey Hole Fisherfolk! Fall is in the air and I have finally pried my bottom from the saddle of my bike for a while... Figured I would stop by and say Howdy to all the fine KBV friends on a beautiful fall day.

Hope you had a wonderful birthday boB and tell Ciego to watch were he is going with that "thing" in his hand... Might put someones eye out.

 

[zbasspro]

Good morning fine Fisherfolk at the Hidey Hole! Well after my Cardinals mounted the impossible comeback against the Phillies last night I may be in the market for a new web developer and Supplier Associate Great game and 2 great historic teams! I never knew they had never faced each other in the playoffs before, kind ODD considering they are both original teams.

Hope everyone has a great week! We did quite a bit of volume Friday night and Saturday morning so I may be scarce for the next 2 days trying to get these out ahead of time. Last week we managed to stay right around 48 hours with turn around, this week some may fall into the 72 hour, but we're trying to avoid that

Before......

View attachment 56076

After.....

With my BB/ScubagenV3
View attachment 56077
View attachment 56078
Sent from my C771 using Tapatalk

Awesome job! I was unable to get in the co op for the Scubagen due to my status since it was in the classifieds but have heard great things, I know nothing about them. As far as the mini LMK, it's collecting dust and I'd rather see someone use it

Morning Hidey Hole Fisherfolk! Fall is in the air and I have finally pried my bottom from the saddle of my bike for a while... Figured I would stop by and say Howdy to all the fine KBV friends on a beautiful fall day.

Hope you had a wonderful birthday boB and tell Ciego to watch were he is going with that "thing" in his hand... Might put someones eye out.

A Jelly Man sighting! Ciego offered to "light my candle", I figured that was probably not a good idea. Good to see you! Fall made a short visit, we actually had a frost Sun morning but gonna be 80s all week. I like 80s this time of year with no humidity and cool nights but it doesn't help my evenings in the woods, guess I gotta get up at 4 or so and get out early. That's if I ever find time to sight in my X-bow I am switching to with my back


*runs from medic with the big needle!*

 

[Dalton63841]

...I was unable to get in the co op for the Scubagen due to my status since it was in the classifieds but have heard great things, I know nothing about them...

Hey boB, have you seen Scubabatdans newest design, the DSUv6? Adjustable air and liquid flow like a UFS, with a much simpler rebuildable coil/wick. The only tool you will need to assemble it is a screwdriver. You can make it as tall or as short as you want to define how much joose it should hold. Also, he is making it so you can use polycarbonate tubing, Pyrex, or stainless steel.

 

[zbasspro]

Is that on an ego batt? Looks about the right diameter for a Provari Is he selling them? Forgive me for being out of the loop I never have time to get on anymore

Hey boB, have you seen Scubabatdans newest design, the DSUv6? Adjustable air and liquid flow like a UFS, with a much simpler rebuildable coil/wick. The only tool you will need to assemble it is a screwdriver. You can make it as tall or as short as you want to define how much joose it should hold. Also, he is making it so you can use polycarbonate tubing, Pyrex, or stainless steel.

 

[Dalton63841]

Is that on an ego batt? Looks about the right diameter for a Provari Is he selling them? Forgive me for being out of the loop I never have time to get on anymore

LOL Actually I think it is on an eGo battery. It is sized perfectly for a Provari, since that is primarily what he uses. He isn't selling them. He is waiting on price quotes to come back, and will be having a coop, just like he did with the Scubagen.

It has changed slightly. You see the tapered tube in the center. That has been swapped out for a SS chamber covering the coil, with a straight piece of tubing connected to the top, to make it easier to change the size.

The first quote he got was about $55, but he has made the design simpler since then, and is checking for a cheaper place. In either case, this one is solder-free, air and liquid control, and the wick is a small 1" straight piece since it is gravity fed, so to me it's worth that much LOL.

 

[dmj4]

Oh my......no filler! I love it! My KBV Crisp Cola, Hummingbird and the other 10 or so KBV flavors want this!

 

[sonicdsl]

Oh my......no filler! I love it! My KBV Crisp Cola, Hummingbird and the other 10 or so KBV flavors want this!

^^^^ That!

Sent from my DROID X2 using Tapatalk

 

[UA72Riddle]

Bob....

I'm letting you know.....I want it! LOL

Yeah, I agree with Dalton......the SGv3 is nice if you are used to making wicks bend.....but it is a pain in the .... to get the hang of it. Wait for the new versions, will be much easier to build and use.

If you get in on it, let new know. I have plenty of mesh and wire I can send you. Stocked up when I bought my first Genisis atty.

If you want, I have an extra SGv3 I can send you to try out to see if its even something you would like.

Sent from my C771 using Tapatalk

 

[UA72Riddle]

No filler, just a SS wick.... and of course the heating coil..... and your favorite KBV joose!

Sent from my C771 using Tapatalk

 

[Dalton63841]

Oh my......no filler! I love it! My KBV Crisp Cola, Hummingbird and the other 10 or so KBV flavors want this!

^^^^ That!

Sent from my DROID X2 using Tapatalk

No filler, just a SS wick.... and of course the heating coil..... and your favorite KBV joose!

Sent from my C771 using Tapatalk

LOL Riddle, I'm the same way. Got a 1lb. roll of Nichrome, several feet of Kanthal, and a bunch of SS Mesh.

Since others seem to be interested in it as well, I will post here, when the coop goes live. It should be much easier to get into this coop. The last one was done in 8 hours. He said this one would probably go for a week, regardless of how many names are on the list.

 

[UA72Riddle]

Oh my......no filler! I love it! My KBV Crisp Cola, Hummingbird and the other 10 or so KBV flavors want this!

^^^^ That!

Sent from my DROID X2 using Tapatalk

No filler, just a SS wick.... and of course the heating coil..... and your favorite KBV joose!

Sent from my C771 using Tapatalk

LOL Riddle, I'm the same way. Got a 1lb. roll of Nichrome, several feet of Kanthal, and a bunch of SS Mesh.

Since others seem to be interested in it as well, I will post here, when the coop goes live. It should be much easier to get into this coop. The last one was done in 8 hours. He said this one would probably go for a week, regardless of how many names are on the list.

Try this on for size......

Didn't read close enough when I was buying my kanthal from eBay, ordered two spools then read that each spool was 75ft ..... I've given away 50ft and haven't even dented it yet.....

Ordered one sheet of mesh, they sent six.....

I have wick material for my grandkids!! LOL

Sent from my C771 using Tapatalk

 

[SmokingBullet]

So I fill up a new DC carto with some of my very last gooey better cake and put it onto my eGo 1100, sit back and take a nice long vape.....ahhhhhh.....then I take another one except this time I'm not getting a draw...hummmmm....I try again.....bammmm, snap, crackle and pop...smoke everywhere, my carto and battery are too hot to handle, and I can't tell if it's vapor or smoke coming from my carto.....oh man and the smell....yuck.
Does this mean my eGo battery just died?

 

[Dalton63841]

So I fill up a new DC carto with some of my very last gooey better cake and put it onto my eGo 1100, sit back and take a nice long vape.....ahhhhhh.....then I take another one except this time I'm not getting a draw...hummmmm....I try again.....bammmm, snap, crackle and pop...smoke everywhere, my carto and battery are too hot to handle, and I can't tell if it's vapor or smoke coming from my carto.....oh man and the smell....yuck.
Does this mean my eGo battery just died?

Probably...Something definitely shorted out, and if it shorted out, it almost definitely killed the battery.

 

[SmokingBullet]

I figured that much LOL. What a bummer about my fresh carto

Probably...Something definitely shorted out, and if it shorted out, it almost definitely killed the battery.