Krimson Kustoms, 3.7v, 5, Variable Voltage and Evercool. Quality, Look, Great Price.

[JamesW]

yeah I always just slightly fit the tip in then tip the bottle over and it pushes air through the hose but I think your method may actually be better. You actually were the first mod I put a mosfet in and after doing it twice, I'll probably have to charge like $15 more for it because the parts for like $6 and it take an extra half hour to get it all wired. It's cool to use smaller and different buttons but I like the feel and reliability of the horn ones so I still stick with those on my main stuff.

Techno kind of got away with a killing on his, it's because he caught me and I really wanted to make it all the same color scheme so I put a bit more into his setup but it turned out great so it's worth it.

Bully, you and quattro are both on the table tonight. Tomorrow I should get the switches that were supposed to show up Friday for my feeders so I will have a couple of cool feeders done tomorrow.

As for my juices, I'm a sucker for bubble gum but really the only one I've found that I really dig is Viking Vapor's. I do like some RY-4 if it has more caramel in it than normal. I just can't really get into the tobacco stuff, I've tried dry blends and ry-4's but I've never tried the like boba's because I like sampler packs and it's hard to cough up $15 - 20 for something that I'm not sure about. I like some sweet flavors but haven't gotten any Ms. T's because I'm a cheap skate but now she sells smaller bottles so I may have to try it.

James

 

[bully mom]

James, you made my day. If I had known this post was here telling me my lil man was on the table, I would have dressed up and baked a cake

Quick question... the AW 14500 batteries will fit in my mod right??????

Just checking!!

Now...... GET BACK TO WORK!!!!!!


Love ya James as my grandson's would say, "U da Man"

 

[pineappledan]

yes they will bullymom, 14500(14mm wide by 50.0mm long) batteries are not exactly the dimensions claim, but the springs make up a lot of space while maintaining continuity. those batteries will fit and work fine in your mod. different batteries/suppliers do claim a common measurement(i.e. 14500, 18650, etc.) but they all vary. for example, the protected batteries, as far as my experience says, are a little bit longer. the extra length is for the protection circuit. you will not have a problem using aw batteries in your highly anticipated littleman. no worries my friend.

 

[bully mom]

yes they will bullymom, 14500(14mm wide by 50.0mm long) batteries are not exactly the dimensions claim, but the springs make up a lot of space while maintaining continuity. those batteries will fit and work fine in your mod. different batteries/suppliers do claim a common measurement(i.e. 14500, 18650, etc.) but they all vary. for example, the protected batteries, as far as my experience says, are a little bit longer. the extra length is for the protection circuit. you will not have a problem using aw batteries in your highly anticipated littleman. no worries my friend.

Perfect! Thanks PD....

Just out of curiosity about how often will I have to charge the batteries? I have 4 of them and they are the protected 14500 AW batteries? I'm not a heavy vaper but I have 1 ego 650 and 2 of the 900 ego batteries and I take turns with using them all at the same time, (three different flavors). The 650 needs to be charged nightly and the other two last me every other night bf having to charge them. Does this make sense?? I wonder how the 14500's will compare. At the same time, I will only have 1 mod going at a time.

Thanks again Dan.

 

[JamesW]

With using the AW's you will have closer to 2 days out of it then, depending on voltage and usage. I vape about 2mls a day so I normally change mine out before I go to work every morning and but I've forgotten and it will make me through most of the second day.

James

 

[JamesW]

Oh I forgot to mention I also got the buttons in, so for the couple of gentlemen that wanted to wait for them I will be finishing up your bottomfeeders as well this evening.

James

 

[macguy]

Woohoo!


*does a happy dance*

 

[bully mom]

Woohoo!


*does a happy dance*

Me too mac, lets dance!!!!!

 

[JamesW]

Was a busy busy night this evening. Got to sit down and finish not 1 but 4 mods! However, after 12 hours of modding I'm fairly tired and basically unable to make videos in my current slurry state so I have slideshows!

Clear Case Little Man off to France!

Red Little Man hopefully doesn't get eaten by a bulldog!

Clear Case Bottomfeeder that had half of it painted internally for sweet effect.


Blue on Blue Bottomfeeder with a deep well

Along with getting a good hunk of mods done, I finally got my grade on my final that I did a week ago, 82 out of 90! So I got a 97% in Business Law, little pat on my own back for that.

Other than that, you guys have a wonderful day, the mods will be getting in the mail and I'll be moving on to making Mo' Shtuff!

James

 

[kazz63758]

Congrats on the grade James! ...and for getting abit closer to being caught up

 

[bully mom]

THANK YOU JAMES!!!

They ALL look great. Of course I like mine best. Congrats on the grade. Well done my friend.

You can be sure I will keep my lil man far away from the bull dog. He is a much happier boy now that he never has to smell real smoke again. He hated it!!

Merry Christmas to you and your family. Be well.

bullymom

 

[donesmokin]

Was a busy busy night this evening. Got to sit down and finish not 1 but 4 mods! However, after 12 hours of modding I'm fairly tired and basically unable to make videos in my current slurry state so I have slideshows!

Clear Case Little Man off to France!

Red Little Man hopefully doesn't get eaten by a bulldog!

Clear Case Bottomfeeder that had half of it painted internally for sweet effect.


Blue on Blue Bottomfeeder with a deep well

Along with getting a good hunk of mods done, I finally got my grade on my final that I did a week ago, 82 out of 90! So I got a 97% in Business Law, little pat on my own back for that.

Other than that, you guys have a wonderful day, the mods will be getting in the mail and I'll be moving on to making Mo' Shtuff!

James

I read "Clear Case Little Man" (OH BOY!), then "off to France!" (Rats!). Why oh why didn't I order sooner...LOL!

bully mom it's almost time to start stalking the mailman!

Congrats on the grade James!

Merry Christmas to all!

 

[Frostedflames]

The new mods look sweet!! I just got my cartomizers, batteries and chargers so when I get my mine I won't have to wait! Grats on your finals

 

[bully mom]

Just put my batteries in to charge. I selected the 3.7 setting rather than 3.2 and I selected the 650mA rather than the 300mA. My batteries say 750mAh on them. Do I need to do anything differently? I am going to label them A1 and A2 and the second set I'm gonna label B1 and B2.

You guys said that no question was a dumb question so don't laugh at me.

Oh yeah, my attys are all Joye 510 only one is a LR. Does anyone like something different??

Okay, thats it for now. I need to get back out to the mailbox!!

 

[Modrod.]

Just put my batteries in to charge. I selected the 3.7 setting rather than 3.2 and I selected the 650mA rather than the 300mA. My batteries say 750mAh on them. Do I need to do anything differently? I am going to label them A1 and A2 and the second set I'm gonna label B1 and B2.

You guys said that no question was a dumb question so don't laugh at me.

Oh yeah, my attys are all Joye 510 only one is a LR. Does anyone like something different??

Okay, thats it for now. I need to get back out to the mailbox!!

3 ohms is a good all around resistance for attys/cartos at all voltage ranges from my experience.

 

[everman7]

bullymom,

since you got a little-man, don't use that LR on high voltage! it will burn it up. (in case you don't already know...)

I just received and fired up my Boge 2.0 carto and it is miles better than all of the smoketech 1.7 dual coil and madvapes xl dual coil cartos I've tried previous to this. I just have a roughstack and an ego passthrough running 3.7v and 3.2or3.6v respectively.
Well that is until that bottomfeeder arrives.
Mine is the one that is the half painted. ZOMG! I can't waitz!

 

[bully mom]

bullymom,

since you got a little-man, don't use that LR on high voltage! it will burn it up. (in case you don't already know...)

I just received and fired up my Boge 2.0 carto and it is miles better than all of the smoketech 1.7 dual coil and madvapes xl dual coil cartos I've tried previous to this. I just have a roughstack and an ego passthrough running 3.7v and 3.2or3.6v respectively.
Well that is until that bottomfeeder arrives.
Mine is the one that is the half painted. ZOMG! I can't waitz!

Thanks for the advice and I will be oh so careful with the 1.7 and will probably just keep those for my eGo, if I ever use it again. LOL

I have already ordered a bunch of the boge 3.0's and still have a few boge 2.0's. I don't blame you for being so excited about your mod. It is really neat looking. Was that your idea or James's?? I have a feeling he will be getting orders for some more of those. Get those batteries in the charger buddy, it won't be long now!!!

 

[bp400]

no way, crank your 1.7s up to 4.0-4.2v on your little man!

 

[pineappledan]

bullymom, as far as batts go, you should label, charge, use, and discard in sets. the reason, the power from 1 battery will pass through the other battery in a full loop. if one of those batteries varies from what it's "used to", failure, reduction in life, and over discharge may occur. I mark mine with a sharpie with a solid line of black on 1 pair of batts. you could yse markers, paint, masking tape, electrical tape pull tabs in different locations, etc. not everyone thinks this is nessisary but it's easy enough to do and it makes me feel better.

 

[bully mom]

no way, crank your 1.7s up to 4.0-4.2v on your little man!

So bp, I can use the 1.7's as long as I don't go over 4.2????

That would be nice!!! Just want to be safe. Thanks buddy