Lauched!Original Smoant Battlestar Baby Pod Kit

Status
Not open for further replies.

GinaVape

Forum Supplier
ECF Veteran
Feb 14, 2017
11,303
404
32
www.3fvape.com
Hi, guys! Welcome to New Product Introduction! I have a question: do you need a Pod Kit at present? Today let me introduce you one pod kit named Original Smoant Battlestar Baby Pod Kit . Now let’s take a closer look at the pod kit below.

The Smoant Battlestar Baby Pod System Kit is powered by built-in 750mAh battery (max output 15 watts) to provide you long time vaping. The Battlestar Baby Pod kit adopts LED battery indicator to show the battery life. It utilizes innovative Lanyard, Charging cable and CPR technology without finger print. The Smoant Battlestar Baby Pod Kit comes with a pod cartridge, which is made of PCTG, featuring 2ml capacity and you can fill it through the port on the left side. There are two type of coils: 1.2ohm Ni80 coil and 0.6ohm mesh coil are included, they can provide you a smooth flavor. And the organic cotton wrapped inside delivers pure flavor. Due to the charging power is 5V / 0.8A only, so it'll take you about 60 minutes to fully charge. On the left side, the indicator will tell you the current battery life in different colors. Inside of the battery, the ANT Smart Chipset equipped ensures the stable output voltage to keep powerful every time. The USB-C charging cable is specially designed as well which you can use it as a lanyard or the cable if necessary.

authentic-smoant-battlestar-baby-750mah-box-mod-pod-system-starter-kit-black-2ml-06ohm-12ohm.jpg
authentic-smoant-battlestar-baby-750mah-box-mod-pod-system-starter-kit-black-2ml-06ohm-12ohm.jpg

authentic-smoant-battlestar-baby-750mah-box-mod-pod-system-starter-kit-black-2ml-06ohm-12ohm.jpg
authentic-smoant-battlestar-baby-750mah-box-mod-pod-system-starter-kit-black-2ml-06ohm-12ohm.jpg


Main Information:
Battlestar Baby Mod
Size45 x 60 x 15mm
Battery: 750mAh
Power output: 10 / 15W
Charging: 5V / 0.8A
Port Type: Type-C
Charging Time: 45~60 minutes
Surface Process: Electroplate + Patch
Battlestar Baby Pod Cartridge
Capacity: 2.0ml
Material: PCTG
Coil Type: 0.6ohm Mesh Coil (15W), 1.2ohm Ni80 Coil (10W)
Innovative CPR technology without finger print
LED indicator: red 5%~30%, blue 30%~60%, white 60%~100%
Lanyard & Charging cable
Independent airflow design
Smooth flavor
Over time protection (8 seconds)
Short circuit protection
Low power protection

There are six colors for you to choose, so which color is your favourite? Check the product page to know more:
Original Smoant Battlestar Baby Pod Kit >>>

Replacement Coils you will need:
1.2ohm Ni80 Coil:
Original Smoant Replacement Ni80 Coil Head for Battlestar Baby Pod Kit - 1.2ohm (3 PCS) >>>
0.6ohm Mesh Coil:
Original Smoant Replacement Mesh Coil Head for Battlestar Baby Pod Kit - 0.6ohm (3 PCS) >>>

Replacement Pod Cartridge + Coils (0.6ohm Mesh / 1.2ohm Ni80):
Original Smoant Battlestar Baby Pod Kit Replacement Pod Cartridge + with 0.6ohm Mesh + 1.2ohm Ni80 Coil >>>

Replacement USB-C Charging Cable Lanyard:
Original Smoant Battlestar Baby Pod Kit Replacement USB-C Charging Cable / Lanyard >>>

More Pod Kits are in stock now:
3FVAPE - Pod Kit >>>
 

GinaVape

Forum Supplier
ECF Veteran
Feb 14, 2017
11,303
404
32
www.3fvape.com
Hello everyone.
Have you ever worried about that you not know enough about the product?
Don't worry,this time we present to you the Original Smoant Battlestar Baby Pod Kit unboxing video.



This product is in stock now, buy it immedaitely on 3FVAPE:
Original Smoant Battlestar Baby Pod Kit >>>

Replacement Coils you will need:
1.2ohm Ni80 Coil:
Original Smoant Replacement Ni80 Coil Head for Battlestar Baby Pod Kit - 1.2ohm (3 PCS) >>>
0.6ohm Mesh Coil:
Original Smoant Replacement Mesh Coil Head for Battlestar Baby Pod Kit - 0.6ohm (3 PCS) >>>

Replacement Pod Cartridge + Coils (0.6ohm Mesh / 1.2ohm Ni80):
Original Smoant Battlestar Baby Pod Kit Replacement Pod Cartridge + with 0.6ohm Mesh + 1.2ohm Ni80 Coil >>>

Replacement USB-C Charging Cable Lanyard:
Original Smoant Battlestar Baby Pod Kit Replacement USB-C Charging Cable / Lanyard >>>

More Pod Kits are in stock now:
3FVAPE - Pod Kit >>>
 

GinaVape

Forum Supplier
ECF Veteran
Feb 14, 2017
11,303
404
32
www.3fvape.com
Hey there mates.
What a exciting news!
The Original Smoant Battlestar Baby Pod Kit is in stock now at 3FVAPE.

Real Scene Photos:
a3ylSBV.jpg


Main Info:
Battlestar Baby Mod
Size45 x 60 x 15mm
Battery: 750mAh
Power output: 10 / 15W
Charging: 5V / 0.8A
Port Type: Type-C
Charging Time: 45~60 minutes
Surface Process: Electroplate + Patch
Battlestar Baby Pod Cartridge
Capacity: 2.0ml
Material: PCTG
Coil Type: 0.6ohm Mesh Coil (15W), 1.2ohm Ni80 Coil (10W)
Innovative CPR technology without finger print
LED indicator: red 5%~30%, blue 30%~60%, white 60%~100%
Lanyard & Charging cable
Independent airflow design
Smooth flavor
Over time protection (8 seconds)
Short circuit protection
Low power protection

If you want to get one, buy it on 3FVAPE:
Original Smoant Battlestar Baby Pod Kit >>>

Replacement Coils you will need:
1.2ohm Ni80 Coil:
Original Smoant Replacement Ni80 Coil Head for Battlestar Baby Pod Kit - 1.2ohm (3 PCS) >>>
0.6ohm Mesh Coil:
Original Smoant Replacement Mesh Coil Head for Battlestar Baby Pod Kit - 0.6ohm (3 PCS) >>>

Replacement Pod Cartridge + Coils (0.6ohm Mesh / 1.2ohm Ni80):
Original Smoant Battlestar Baby Pod Kit Replacement Pod Cartridge + with 0.6ohm Mesh + 1.2ohm Ni80 Coil >>>

Replacement USB-C Charging Cable Lanyard:
Original Smoant Battlestar Baby Pod Kit Replacement USB-C Charging Cable / Lanyard >>>

More Pod Kits are in stock now:
3FVAPE - Pod Kit >>>
----------------------------
Coupon for Halloween
Oct 28th 2019 00:00 - Nov 3rd 2019 23:59 (UTC-6 / Denver Time)
Offer: site-wide 5% off
Code: Halloween2019
Note: This offer is not stackable with other MAP discounts.
 
Status
Not open for further replies.

Users who are viewing this thread