Life after provari
- Thread starter james chapman
- Start date
- th_trl_thread_readers 0
- Status
I you still love your Provari's you can send them in for repair/refurbish. The company Provape has closed their doors but I do believe the warranty service will still be available for a while longer.
You may want to check this thread Provape devices
You may want to check this thread Provape devices
You can contact Bill about repairs for the ones you have. A link to his email address is on the old Provape site. He fixed one of mine, and I just sent him some more for software updates. It can take a few weeks from start to finish, but I'm happy with the service.
Limited stock of 2.5's still available here:
Provari 2.5
If you go through the verification process you can watch the classifieds on ECF and try to catch some from the ECF people.
You could try a Pico if you want an inexpensive box mod. You will need to have tanks around 22mm, but if you were using something on a Provari, you might be OK with them. The Pico works with tootle tanks, and takes flat top batteries, so you might need to get a new pair of batteries if you are changing to a newer mod.
If I wanted a ProVari and couldn't find one, I would look at Dicodes. They make some wonderful mods. It's a fairly in depth chip set, but they work in basic wattage mode as well as any mods made. Top shelf stuff.
The Zmax is the poor mans provari. I have several and they work just as well
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
hey folks.
cool thread.
Yeah it really is a shame that they closed.
Personally, to me, the provari p3's and Procyon were/are some of the slickest—nope they were the slickest— tube mods ever made. Simple and clean. Most importantly, they were the easy to make whatever kind of tank you were running look good.
I'm a little obsessive on the cosmetic department...They have to look cool!
I'd suggest picking up a 2.5 in the classys by one of the many cool folks in there.
2.5's are bullet proof—well almost bullet proof.
@Asbestos4004
yeah those Dicodes definitely look cool. They definitely look sterdy!
IM interested, do you have one?
cool thread.
Yeah it really is a shame that they closed.
Personally, to me, the provari p3's and Procyon were/are some of the slickest—nope they were the slickest— tube mods ever made. Simple and clean. Most importantly, they were the easy to make whatever kind of tank you were running look good.
I'm a little obsessive on the cosmetic department...They have to look cool!
I'd suggest picking up a 2.5 in the classys by one of the many cool folks in there.
2.5's are bullet proof—well almost bullet proof.
@Asbestos4004
yeah those Dicodes definitely look cool. They definitely look sterdy!
IM interested, do you have one?
I've had dicodes in the past....dani box, a #9, an dani extreme.... I've had several. Build quality is about as close to perfect as I've seen. The only draw back to me is the complex menu. I'm sure it's easy enough if you really try to learn it but all I needed them to do was run in wattage mode. I got 'lost' in the menu a time or two....but this is coming from someone who can barely manage to send a text.
I have always loved ProVape products....but I'd say dicodes is as good or better, quality and fit and finish wise.
Lolbut this is coming from someone who can barely manage to send a text.
ME too... I'm in the same boat.
On the dicodes. Cool!
I was thinking about taking the plung on one of their tubes but... that little voice in the back of my mind keeps saying,"provari...provari." Lol
THe dicodes does look cool though.
There's plenty of good mods out there that provari being closed won't hurt. For an all day mod I'd rather carry a small pico, or single 18650 box mod over the longer regulated tubes. Since I never used cartos I can't give you any recommendations on what works best with them but all the newish mods should do you fine, might not be as reliable as the provaris tough.
Lots of decent mods out there but so far I have found Dicodes to be the only one comparable to provape in quality, service and styles. Hohm tech is to new to rate as a company yet but they have promise. Yihi mods are good but don't have the quality or service even though the cost is comparable. Any other company falls in the throw away class.
I'm definitely no Connoisseur De Vape but these worked just fine for me. Can't speak to longevity as I moved on to box mods not long after getting a couple of these.
SMOK SID Single – VapeZone
SMOK SID Single – VapeZone
Other than Dicodes, I'd think that innokin mod with the DNA chip would give a quality vape with a steel tube.
I d be looking soon for someone offloading their v2 Provaris cheap that they picked up during that $30 sale.
I d be looking soon for someone offloading their v2 Provaris cheap that they picked up during that $30 sale.
Tube - Ehpro 101 mod (looks good and has given me no issues in wattage mode so far) 22mm tanks look hybrid.
Box - Aspire NX75 - Small, heavy and customisable to the Nth degree.
If money isn't an issue - Dicodes all day long.
Box - Aspire NX75 - Small, heavy and customisable to the Nth degree.
If money isn't an issue - Dicodes all day long.
Yeah... But the Provari's especially the Procyon look...so darn slick.
The dicodes comes close in the looks department but... It's just not as slick.
Sure it check's the minimal box but... it feels like it's just a tube. That's what the looks of that Dicodes makes me think of, "It's just a tube." Obviously it's not. Obviously the thing performs great and all. What I'm trying to say is it's bordering on bland. It has no details.
The Procyon is so minimal—with mind you—just the right amount of third read details. Those little greek accents around the top and bottom...Just right.
The looks of the Procyon, as far as I'm concerned are just, well, perfect.
Keep in mind. I don't own one. I'd like a stealth one. Im not sure how much I'll like that end cap thingy.
Regardless, It's the most timeless mod I've ever seen.
The dicodes comes close in the looks department but... It's just not as slick.
Sure it check's the minimal box but... it feels like it's just a tube. That's what the looks of that Dicodes makes me think of, "It's just a tube." Obviously it's not. Obviously the thing performs great and all. What I'm trying to say is it's bordering on bland. It has no details.
The Procyon is so minimal—with mind you—just the right amount of third read details. Those little greek accents around the top and bottom...Just right.
The looks of the Procyon, as far as I'm concerned are just, well, perfect.
Keep in mind. I don't own one. I'd like a stealth one. Im not sure how much I'll like that end cap thingy.
Regardless, It's the most timeless mod I've ever seen.
Last edited:
I'm the other way round, lol. I think the exquisite finish of the Dicodes far out passes the detailing of the provape products. I was a steel worker tho. And the finish and disappearing threads on the GP mechs are sweeet also. Hate to see all that ruined by cnc detailing, or ugh, Paint
.
Glad I stopped in today. I have 2 Provari 2.5s that I purchased for vapocalypse, and I haven't used them at all. They won't work with my Triton 1 or 2s, nor my Lemo2s. They fault out. Can anyone tell me a tank that they will work with? Thanks!
- Status
Similar threads
- Locked
