The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

Limitless single coil build for Stretchpants

Discussion in 'Copper Creek' started by FlyingV, Sep 2, 2016.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. FlyingV

    FlyingV ECF Guru Verified Member ECF Veteran

    Supporting member
    #1 Start by putting out these items, plus a scissors for cutting the cotton:
    [​IMG]

    #2 Take the top cap off:
    [​IMG]

    #3 Take it apart to this point:
    [​IMG]

    #4 Loosen the top screws, do not drop them as they will gone forevermore:
    [​IMG]

    #5 Put in your premade coil and tighten said screws. You don't want it to touch the center, nor stick out very far:
    [​IMG]

    #6 Cut off the excess little coil legs sticking out the other side:
    [​IMG]

    #7 Use the screwdriver to straighten out the coil:
    [​IMG]

    #8 It's ready for the cotton now:
    [​IMG]

    #9 Put it on your Radius and hit the button to make sure your coil is the right ohms:
    [​IMG]

    #10 Cut a strip of your cotton:
    [​IMG]

    #11 Twist the end so that it will go through your coil:
    [​IMG]

    #12 Feed the end through your coil:
    [​IMG]

    #13 Pull it through half way:
    [​IMG]

    #14 Tuck the ends into the glass, keeping the cotton in the metal grooves:
    [​IMG]

    #15 Put the silver ring back on:
    [​IMG]

    #16 Press the plastic piece in the open grooves:
    [​IMG]

    #17 Put the next piece on:
    [​IMG]

    #18 Put the top cap and drip tip adapter on:
    [​IMG]

    #19 Slide the pretty part up to fill it through the filling port:
    [​IMG]

    #20 Turn the black top cap to adjust the airflow:
    [​IMG]

    Vape. Let me know if you need me to email the bigger pics. :)
     
    • Like Like x 1
  2. stretchpants

    stretchpants ECF Guru Verified Member ECF Veteran

    I'm on step 3 and only have 3 pieces. I don't have the piece that's right out front of all of them in the pic..
     
  3. stretchpants

    stretchpants ECF Guru Verified Member ECF Veteran

    Step 5..How does the coil go on? There's a bunch of holes.Which ones for a single build?
     
  4. stretchpants

    stretchpants ECF Guru Verified Member ECF Veteran

    I have really fine wire and it's shorter than what they sent.Will it even work? It looks much smaller than what they sent.Should I put in what they sent? I'm not sure how it should look when it's completed.
     
  5. FlyingV

    FlyingV ECF Guru Verified Member ECF Veteran

    Supporting member
    The top holes, under the blue screws are the easiest. You have the parts, honest. Keep taking stuff apart.

    Let me know how you're doing!
     
Thread Status:
Not open for further replies.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice