Little itty bitty mods under $100.

Status
Not open for further replies.

pufZeppelin

Vaping Master
ECF Veteran
Jul 6, 2013
7,610
24,603
Florida, SW
It's a sad day. My not so itty bitty, but first mod, my MVP 2 appears to be on her last leg. Stayed on a charger for over 8 hours today, and her light never went out. Sigh, she's not gone yet, but I fear the end is near. I know that there are far more advanced mods out there, but it feels like I am losing an old reliable friend. Despite her size, and low wattage, she and my Anyvape Davide with a BVC coil have still been part of my daily rotation. I will hold on to her as long as she is willing, but a sad day indeed.

yes, Sad Indeed

did you try to FULLY discharge the `ole gal ?

hook something into the USB Out port,
and deplete the BATTERY down PAST the yellow light until it shuts off...
then try a full charge (guess it wouldn't hurt nuthin)

best of wishes

:cry:
 

Katdarling

I'm still here on ECF... sort of. ;)
Supporting Member
ECF Veteran
Verified Member
Jan 25, 2011
32,582
167,758
Utopia
In honor of His Faithful Service, I decided to not Unceremoniously chuck Him into the Trash. But Relegated Him to the Back of the Vape Drawer. Patiently awaiting Battery Transplant Surgery.

My little iTazte V3 went to the Radio Shack Rainbow Bridge. Even the minister (the guy behind the counter) shed a tear.
 

aikanae1

Vaping Master
ECF Veteran
Verified Member
Feb 2, 2013
8,423
26,259
az
Aha. Cero TANK! I was searching for Cero Vape and coming up with a hellofa lot different information that made no sense to me at all! :facepalm:
Talk about a mess. I've got 8 variations of Kanger coils now. I picked up the Davide before the bvc coils came out so it works with Kanger only, but haven't used in in a long time. It's retired with the pt2's and below. That was when I was still too new to know that one doesn't "have to" buy everything that comes out. Remember when T3's had bases with atty's attached? Yup still even have a small stash of those. Whadda ride. :smokie:

12196223_1618383818426747_7364847843924395084_n.jpg
 

jefsview

Vaping Master
ECF Veteran
May 2, 2013
9,756
11,127
Crete, Il
I don't know if anyone watched GrimmGreen's Vlog Thursday, but there was one "first impression" that impressed me.

It concerns the WISMEC Presa, which has already had two iterations, and is about to have a third. He showed off the latest Presa, not knowing of the first 2 iterations. Seems that the all-new, all-different WISMEC Presa will have more in common with the Evic VT mini than it's previous iStick origins. Yes, the newest Presa shall have a replaceable 18650 battery and share the Evic VT mini screen/board.

Hopefully these will see a wider distribution than the original.
 

Kyi

Ultra Member
ECF Veteran
Verified Member
Jan 7, 2010
1,867
1,343
40
Atlanta
I have to agree on the Wismec, I was this close to pulling the trigger on the Presa 40w TC a few nights ago, but decided to sit on it for a day and do some more research since there were a few mods I was interested in. The next day, I tried to find more information on the Presa and saw that there was the 75w version available for pre-order. Not only that, I was about to buy the 40w TC on Angelcigs and saw that they had taken that model off their site and replaced it with the 75w preorder instead. I had no idea this mod even existed and would have been pretty peeved if I had ordered the 40w TC and the better version came out a day after for the SAME price. In my opinion, Wismec saw the other 'viable' options in the same price range and knew if they wanted their newest mod to take off or stay competitive, they would have to release another one with better and more features. I know Wismec and Joyetech are the same company but it was probably smart of them to do it now when more people are making the switch to TC rather than when the market is more saturated and people have even more options. As far as I know, a week to a month later, there will be an even better mod at the same price. This is good and bad at the same time as the technology is improving at a very fast rate and the prices are very affordable but for people who like new stuff all the time, it means a lot of $$$ spent. But I think the ecig industry knows people will continue to buy new things when they don't need it so why not keep releasing a new mod every other month or two??

I honestly can't think of anything else that I do "daily" where I need to keep buying new things for and not even use half the time or upgrade very shortly after. I've needed a new frying pan for a while and when I think about buying a high quality one for like $40 or something, I'm like "Ugh too expensive!!" Even though I'd probably get good use out of it. But no sweat off my back for the 10 mods sitting in my closet that cost more than that and I never use lol.
 

DPLongo22

"Vert De Ferk"
ECF Veteran
Verified Member
Dec 17, 2011
32,979
182,885
Midworld
If any of you get up the gumption to order the Cerotank Mega from Bang Good...please report back! I know I want to get one, but know that, circumstances being what they are right now, I am maxed on my vape budget for this month. Yesterday I had to buy a new cage for our lovebird due to my son's careless treatment of the plastic door holding the feed cup in. It leaves things so that a bump could open that flap, and the bird could get out...or the cat get IN! Dang unexpected expenses! I also had to buy DIY supplies...and that is something that is a must, not a luxury like a new tank! I will await ya'll's reports with baited breath!

:(

It's a sad day. My not so itty bitty, but first mod, my MVP 2 appears to be on her last leg. Stayed on a charger for over 8 hours today, and her light never went out. Sigh, she's not gone yet, but I fear the end is near. I know that there are far more advanced mods out there, but it feels like I am losing an old reliable friend. Despite her size, and low wattage, she and my Anyvape Davide with a BVC coil have still been part of my daily rotation. I will hold on to her as long as she is willing, but a sad day indeed.View attachment 503750

:(:(

Aha. Cero TANK! I was searching for Cero Vape and coming up with a hellofa lot different information that made no sense to me at all! :facepalm:
Talk about a mess. I've got 8 variations of Kanger coils now. I picked up the Davide before the bvc coils came out so it works with Kanger only, but haven't used in in a long time. It's retired with the pt2's and below. That was when I was still too new to know that one doesn't "have to" buy everything that comes out. Remember when T3's had bases with atty's attached? Yup still even have a small stash of those. Whadda ride. :smokie:

View attachment 503775

:) (me likey!)

I don't know if anyone watched GrimmGreen's Vlog Thursday, but there was one "first impression" that impressed me.

It concerns the WISMEC Presa, which has already had two iterations, and is about to have a third. He showed off the latest Presa, not knowing of the first 2 iterations. Seems that the all-new, all-different WISMEC Presa will have more in common with the Evic VT mini than it's previous iStick origins. Yes, the newest Presa shall have a replaceable 18650 battery and share the Evic VT mini screen/board.

Hopefully these will see a wider distribution than the original.

:):) (ME LIKEY!!)

No no no! It was this lil cutie pie.


View attachment 503834

:(:(:(

"Ladies and gentlemen, we are gathered here today to pay tribute to two wonderful mod-souls, who served their vapers valiantly and with true honor..."
 

fourthrok

Vaping Master
ECF Veteran
Verified Member
Aug 12, 2012
3,192
7,709
Watertown, NY
It's a sad day. My not so itty bitty, but first mod, my MVP 2 appears to be on her last leg. Stayed on a charger for over 8 hours today, and her light never went out. Sigh, she's not gone yet, but I fear the end is near. I know that there are far more advanced mods out there, but it feels like I am losing an old reliable friend. Despite her size, and low wattage, she and my Anyvape Davide with a BVC coil have still been part of my daily rotation. I will hold on to her as long as she is willing, but a sad day indeed.View attachment 503750
My heartfelt condolences on your loss! Memories. Treasure them. :(
 

Kyi

Ultra Member
ECF Veteran
Verified Member
Jan 7, 2010
1,867
1,343
40
Atlanta
I've lost a couple of devices too. Not from wearing them out or breaking but from being drunk and leaving it at some public bar. Pretty sure someone took it once they saw that I had left but hopefully they used it to quit smoking.

Sent from my SM-N920P using Tapatalk
 

aikanae1

Vaping Master
ECF Veteran
Verified Member
Feb 2, 2013
8,423
26,259
az
On the local FB page, a person mentioned they had forgotten a full bottle of popular expensive eliquid just outside of a shopping mall. They realized it and went to fetch it not even 5 min later and it was gone. About an hour later, another person fessed up they saw it and nabbed it. What was so funny was realizing it's a small world, vapers are everywhere!
 

clnire

Vaping Master
ECF Veteran
Verified Member
Jan 15, 2013
7,719
73,217
Florida
Question for you Clouper mini 30 watt owners - does your device show correct status of your battery charge? I got one last week from Ecig Charleston, $19.99 - 15%. Great deal, but on this one the battery charge bar does not move as the battery depletes.

Any input greatly appreciated. It is still under warranty so I need to figure it out right away. Thanks!
 

DavidOck

ECF Guru
Supporting Member
ECF Veteran
Jan 3, 2013
21,239
178,486
Halfway to Paradise, WA
Question for you Clouper mini 30 watt owners - does your device show correct status of your battery charge? I got one last week from Ecig Charleston, $19.99 - 15%. Great deal, but on this one the battery charge bar does not move as the battery depletes.

Any input greatly appreciated. It is still under warranty so I need to figure it out right away. Thanks!

Have two, one moves, one doesn't. Until I pop the battery out and replace it. Everything else works fine, and since I got mine from FT (a while back) didn't want to bother with a "ticket."
 
Status
Not open for further replies.

Users who are viewing this thread