Just got my fancy drip tip from Signature Tips, doesn't it look nice? I can finally wack the wattage up to over 100w without burning my lips. Yay
Sent from my SM-N910F using Tapatalk
lJoy/Limitless RDTA (build tutorial and first impressions)
- Thread starter suprtrkr
- Start date
- th_trl_thread_readers 0
- Status
Just got my fancy drip tip from Signature Tips, doesn't it look nice? I can finally wack the wattage up to over 100w without burning my lips. Yay
Sent from my SM-N910F using Tapatalk
Just got my fancy drip tip from Signature Tips, doesn't it look nice? I can finally wack the wattage up to over 100w without burning my lips. Yay
Sent from my SM-N910F using Tapatalk
that cap and tip look great on there. i just can't spend that much on it
i could buy 2 more limitless attys for the price the cap/tip combo would cost me here in the US.if you trim your wicks down, you can get quite a bit more juice in your tank.
I know, not sure what I was thinking when I ordered, it still hasn't shippedthat cap and tip look great on there. i just can't spend that much on it
I know, not sure what I was thinking when I ordered, it still hasn't shipped
lol, i was pretty close to ordering it too. i had it all added to cart but when i did the pound = USD conversion, i was like "must.....resist!!!".
Curiosity compels me to ask what the factory twist coils ohm?
So since I originally posted I have ran this thinges through its paces and tested out every heavy coil I can throw at it with nothing but excellent vapor and flavor as a result. I vape this exclusively now. I bought a second 2 days ago and honestly I have no intention ofor looking back to my other rdas and tanks. Staple staggered fused, alien fraples, fraples, 3 core aliens, it will take them all except for cat track coils (which nothing will take except for my twisted messes and double visions). Awesome rdta, and a consistent vape. Just prepare to replace the grubs at some point if your a heavy builder.
Got one of these about a week or so ago, and I'm using the driptip from the griffin. I do think it delivers good flavor and cloud production but I dislike the cap, a lot. Even with the griffin tip in it, it's just a little wonky for my tastes. I do like the fact that it's designed to be used on a hybrid mod, that's how I use it a lot. I don't really get leaking, last night it was on its side for a few hours without leaks. It doesn't replace my cthulhu v2 mostly because I can't dial the airflow to be perfect, I can get it close but not quite there. Even with it closed way down, because of the size of the chamber and on up, flavor/vapor doesn't really concentrate as I'd like. I'll keep it, and happily use it, but my initial enthusiasm for it has waned somewhat. I also picked up a Modfather 30mm tank, and that thing is a beast, easily the best build quality of any atty I've used, and excellent flavor. It too has a very largish chamber and while the flavor is very good, nothing beats a small chamber for flavor, in my opinion. I have a boreas on its way (the company promised to send me one but never did, so when I saw them on sale for 20 bucks shipped, I though I might as well try one.) I actually bought two limitlesses, but after using it for a few days, traded one away for an avocado 24 and a hastur2 rda. That trade is motivated more by the rda than the avocado, although I look forward to messing around with the avocado, too. It's fun to have a lot of different atties to mess around with, and now that I've given up on the idea that there is a perfect one out there somewhere, I find that I enjoy them all a lot more. Cthulhu v2 has been my go-to tank for something like ten months now, and I don't see that changing, although all these other ones have their good points as well.
If you are a cthulu or goblin type tank vaper then this is not for you necessarily. This is a lung hitters/ big coilers/rda style vapers dream, with outstanding flavor considering all those points, this isn't for your prototypical round wire builds in my opinion.
I geuss what I mean to say is in my experience if u want that dense flavorful vape on this thing, build for it... take up the chamber space with large surface area coils. You'll get all the flavor and vapor u can handle because it is designed for large coils and huge airflow to go with them. Proportions are key to huge airflow attys if you want huge flavor with your huge clouds.
well, i'm running fused clapton coils, 2x24ga 36ga wrap, all ni80, 3mm, six wraps each, pretty big coils...i get plenty of flavor and vapor, just not, i don't know, as refined maybe...it's more like a dripper, which is good, but not like a great dripper. as i said i do like it, it just isn't my favorite...i'm not good at describing or understanding all the mechanics. the airflow is huge but not smooth. it could easily be an all day vape device for me, but for the fact that others just hit the spot a little bit better. i'm not trashing the device at all, there are some that i just can't stand, this isn't one. i don't think it's an issue of too much airflow, it's just not directed in the same way as a rta. maybe i just need to adjust my expectations. i've been using the limitless quite a bit, i find the higher my wattage the more i like it. right now i just have it on a dual parallel mech box. edit: 3.5 mm coils.
Last edited:
I have to say I am loving mine too. I have vaped it every day since I got it. It'll coil high, it'll coil low. It's just a beast.
Picked one of these up with a Limitless mod clone yesterday. Initially I was kinda disappointed, tried a few builds with not much success on the flavour front, but I think I've nailed it now!
I'm running dual claptons - 0.3x0.8mm ribbon wrapped in 0.2mm, kanthal, 2.5mm ID and 4.5 wraps - coming out to 0.2 ohms. Flavour was alright initially, but I've just moved the coils down and outwards so the bottom of the coils line up with the center of the air slot, and the coils are as close to the air slot as they'll get - much better, love it!
I also found that the Avocado (22, don't know about the 24) chuff tip almost fits in. Since I never use it, I filed down the threads a bit, and it clips in nicely to the Limitless chuff cap. Looks basically identical to those using the Griffin wide-bore tip.
Edit: Airflow is closed off about half, with the barrel turned so the air slot starts and ends at the ends of the coil.
I'm running dual claptons - 0.3x0.8mm ribbon wrapped in 0.2mm, kanthal, 2.5mm ID and 4.5 wraps - coming out to 0.2 ohms. Flavour was alright initially, but I've just moved the coils down and outwards so the bottom of the coils line up with the center of the air slot, and the coils are as close to the air slot as they'll get - much better, love it!
I also found that the Avocado (22, don't know about the 24) chuff tip almost fits in. Since I never use it, I filed down the threads a bit, and it clips in nicely to the Limitless chuff cap. Looks basically identical to those using the Griffin wide-bore tip.
Edit: Airflow is closed off about half, with the barrel turned so the air slot starts and ends at the ends of the coil.
You can buy a "Replacement accessories set for Griffin RTA atomizer" from Fasttech for $1.12. Includes the 510 drip tip adapter and a bunch of o-rings, screws etc that might be of use.
Sent from my M7_PLUS using Tapatalk
Just got my Signature Tip but still no Limitless, ho hum, it looks nice, itll look nicer with an attie which isn't even in the country yet, wondering if ill want 2 Limitless atties and should order another local with 1 as back up or wait? Didn't expect them to Fed-ex the tip so quick to me ill wait ,spent enough
ill wait ,spent enough
Ordered this from Fasttech as you suggested, thanks bud. Oh, and ordered a spare glass tank at the same time!
$1.20 Replacement Glass Tank for IJOY Limitless RDTA Atomizer at FastTech - Worldwide Free Shipping
Last edited:
- Status
