Looking For a new RDA need some help..

[SgtSponge]

So I have a tugboat(V1) and an MX(V1) and I am sick of 3 posts. It gets in the way and I cant do good builds due to the little room in the center post for dual coils. So my question what do you guys suggest for a 4 post rda... there is a lot out there. I am mostly a cloud guy but I want a little amount of flavor quality as well.
Thankyou for your guys help and have a wonderful weekend.

 

[Signmaker]

Really not much to reccomend if you're in between clouds and flavor...most will fit the bill. It's more up to how much you want to spend, how much does fit/finish/leaking matter to you, and what you want it to look like.

But, just to throw one out, the Hobo has been making good waves with people.

 

[readeuler]

I just got a Plume Veil from FT, and it's very airy and good for clouds. Mind you, I'm only down around 0.6 and using twisted 30ga, but it's quite nice! 4 post, lots and lots of airflow available that can be dialed down. It's actually been surprising me with flavor lately. It's not the best, but it can get pretty good.

I will say that the airholes through the negative posts do lead to lots of leaking. It's quite easy to overfill. Not an "out and about" atty, for me (well, it is occasionally, but it can get messy).

 

[Signmaker]

I will say that the airholes through the negative posts do lead to lots of leaking.

Short term, you can just turn the barrel a few degrees and block off the neg post airflow holes. Longer term, you can use a bit of kanthal to stuff a pinch of cotton into the holes. Once wet, they swell, and wont leak (but then you dont get the extra air until you poke them out).

 

[Garym93]

So I have a tugboat(V1) and an MX(V1) and I am sick of 3 posts. It gets in the way and I cant do good builds due to the little room in the center post for dual coils. So my question what do you guys suggest for a 4 post RDA... there is a lot out there. I am mostly a cloud guy but I want a little amount of flavor quality as well.
Thankyou for your guys help and have a wonderful weekend.

Mutation x v2. I have 2 of them that's how much I like them.


Sent from my iPhone using Tapatalk

 

[readeuler]

Short term, you can just turn the barrel a few degrees and block off the neg post airflow holes. Longer term, you can use a bit of kanthal to stuff a pinch of cotton into the holes. Once wet, they swell, and wont leak (but then you dont get the extra air until you poke them out).

Good tip. I've been contemplating what to use for that, and for some reason, wick never occurred to me - of course!

Also to clarify, I shouldn't say it leaks a lot. But there is often a little drip of liquid coming out of the lower airholes, which gets annoying. I'll try the wick though, and see how restrictive it is to the airflow. I'd imagine not a whole lot, but we'll see.

 

[SgtSponge]

Really not much to reccomend if you're in between clouds and flavor...most will fit the bill. It's more up to how much you want to spend, how much does fit/finish/leaking matter to you, and what you want it to look like.

But, just to throw one out, the Hobo has been making good waves with people.

Dont really car about how its looks, just how it prefoms, leaking though i would mind not dealing with but id rather have posts and deal with leaking haha

I just got a Plume Veil from FT, and it's very airy and good for clouds. Mind you, I'm only down around 0.6 and using twisted 30ga, but it's quite nice! 4 post, lots and lots of airflow available that can be dialed down. It's actually been surprising me with flavor lately. It's not the best, but it can get pretty good.

I will say that the airholes through the negative posts do lead to lots of leaking. It's quite easy to overfill. Not an "out and about" atty, for me (well, it is occasionally, but it can get messy).

Kool man thanx aill look into a plume veil!

Mutation x v2. I have 2 of them that's how much I like them.


Sent from my iPhone using Tapatalk

Alright man thankyou!

 

[Dougiestyle]

why not throw a 1/16" drill bit through the center post of what you have? Quad-strand-twisted 30ga duals fit in mine that way.

 

[SgtSponge]

why not throw a 1/16" drill bit through the center post of what you have? Quad-strand-twisted 30ga duals fit in mine that way.

dont got drill unfortunetley

 

[JKnight5]

Onslaught. I love mine, and can build 6 coils on it.


Sent from my iPhone using Tapatalk

 

[DaveSignal]

I also like the onslaught.
And the Stillare v3, which is a similar 3 coil design. I prefer the build deck on the stillare.
Mutation v2 is great, except for the triangle-head grub screws.
Dark Horse is really fantastic. So easy to build with the massive post holes and square posts that will never spin.
And plume veil is good too, as has been mentioned, but I think the above attys are even better.