Looking for rebuildables

[jayyco]

I have the Lambo 4.0 (Chrome Lambo 4.0 with Resistance Checker | Variable Voltage Ecig) with the new kanger aero tank. I dont know if i got a faulty aero tank or what but the tank doesnt produce nearly as much vapor than the regular pro tank 3. Any suggestions?
-So this leads to the real question, if i cant fix the aero tank then im gunna end up just getting a new tank, most likely a rebuildable. I use PG 20%-VG 80% so i need a tank that can use that high of VG without any problems.
-Thinking of getting an A7 Rebuildable (A7 Rebuildable Atomizer - Chrome)

 

[Glenn_K]

Greetings and welcome to the forum.

I don't know anything about the A7, but I can say that since I switched from clearomizers to RBAs, I've never looked back. Much better taste and vapor production.

Good luck!

-- Glenn

 

[Silent Solution]

Welcome to ECF! I have never used the A7, but like Glenn, once I switched to rebuildables I haven't used a clearo or tank since. I have a Nimbus, Helios, Trident, IGO-L, IGO-W, and an IGOW3. Waiting on my Kayfun Black edition in the mail. The IGO's are relatively cheap at around 15-20 bucks each. All the devices I have are easy to build on, but some needed a little modification in the form of drilling bigger air holes. The Trident and Helios both have airflow controls on them.

My everyday setup is my Astro Mod with the Helios or IGO-W on top.

 

[Sthur]

Welcome to the forum, I am a fan of the tobeco KFL clones. They work great and I haven't had any problems with 50/50 up to 30/70 juice.

Kayfun Lite Clone by Tobeco with Airflow Control - Eciggity

I also have a trident clone and enjoy it too.

 

[jayyco]

Oh wow nice setup, im on a lower budget and i was just looking for a sturdy rebuildable.

Like i said i use PG 20%-VG 80% juices and i was wondering if it would work without clogging?

 

[jayyco]

Thanks for the suggestion, im most likely getting the Kayfun Lite clone!

 

[Silent Solution]

Here is the link for the Kayfun Black Replica from Ebay. Will let you know how it vapes when I get it, should be tomorrow. You can get a decent RBA for cheap. Are you looking for a dripping rebuildable or a system with a tank on it.
Black Edition Kayfun Lite Plus Russian Style RBA Atomizer with Adjustable 510 | eBay

 

[Imperialbeachboy]

igo L is great for beginners and cheap.

 

[lopdog]

black russian clone from ebay is working great for me - I'm a newbie and don't know the difference yet. Far as I can tell - great and differing tastes at different volts and low throat hit is what I am looking for - got it. I don't care about the clouds - haven't understood why that is great for most yet. I'll get there, takes time

 

[jayyco]

With a tank on it but im looking for a dual coil rba

 

[catalinaflyer]

Wish I could offer advice but after having been the whole route from the beginner CE4 clearo's up to a couple of non-clone high end RBA's I'm now on cartomizers and can't find any reason to go back. I have a KFL clone, a KFL, a 91%, a Steam Turbine, several drippers and all are good but none are better than the vape I've been getting from my cartomizer (which BTW I'm still vaping the original one I bought 3 weeks ago).

Now for a quad coil dripper, may I ask why first?? What is it your hoping to get from a quad coil??

 

[Jazzi Mike]

The A7 is a nice dripper. I tend to use 100% VG. It never caused me issues with any of my rebuildables. However, you really to do some research before attempting a quad coil. Each additional coil will halve the resistance of your total build. It would be pretty tough to build a quad coil and not be in sub-ohm territory.

 

[Phatdanuk]

Just got a kayfun lite plus my first build was a piece of cake after watching YouTube videos and is the tastiest vape I've had expensive though

 

[Jonathan]

Discountvapors has a few different rba's that are good for starters and only cost a few dollars. I picked one up a while ago for 3.99 and still use it when i drip. It has hardware for tri-coil, but works great with only one or two. Single coil is the way to go, IMO. I also get RBA supplies from evcigarettes and Juiceray. My favorite setup is my AGA-t2 with 450 mesh wick, ekowool sleeve, and .5x.1mm flat kanthal ribbon. All the convenience of a tank with all the flavor of an RBA

 

[TheReign]

Just rebuild the dual coil into a single coil like i did, Works way better than the stock dual coil setup and i vape it harder than before. around 8-9 watts is what i usually run 5050 juice on my svd with the Aerotank

 

[Mostwasted]

I been wanting to go to rba's for a while now, I just been rebuilding my triton tank coils. I ordered the nimbus driptip rebuildable should be here tuesday, along with my itaste mvp 2.0. If its any good I'll let you know.

 

[gm91z28]

I like the patriot rba, drilled out the air holes. I also use a kayfun lite and an aqua. I think im starting to like the kayfun better because of the single coil faster rebuild time.

 

[jayyco]

And how exactly is it better, ill take into consideration

 

[jayyco]

Mostly for cloud contest with some buddies of mine, but i realize the quad coil would be to sub-ohm my vape. So now im just looking for a nice dual coil rba that can produce nice clouds

 

[jayyco]

Ya thanks i just realized that, and ok thanks for letting me know about the VG amount, now i dont have to worry about any problems.