Looking to build Tanks

[Justinking]

I mainly just need to know of anywhere I can get Parts for Building Map tank or Liquinator Style tank mods. Not against buying the actual Mods, but I really wanna build a few myself, Any Info will be appreciated Highly!

Thanks Guys

 

[GIMike]

I'm having a hard time locating the syringes that everybody seems to be using. Looks as if you need 2 10 ml syringes to get a decent sized tank. I ordered some cartos from CCV and got a 5 ml syringe, but it's barely any bigger than my boge carto, can't see it being of any use in a tank mod.

 

[RatInDaHat]

mcmaster.com and mscdirect.com have tons of stuff. Just depends on what you are actually looking for.

 

[JonahNM]

I order my steel rod and polycarbonate from Enco. I don't know if that will help, but that is where I get my supply's.

 

[VpnDrgn]

Try this tank mod, it is extremely easy and high capacity.

 

[BigBulli]

I order my steel rod and polycarbonate from Enco. I don't know if that will help, but that is where I get my supply's.

Just got this Stainless Steel 316L Seamless Round Tubing, 3/4" OD, 0.62" ID, 0.065" Wall, 12" Length | SmallParts.com it fits on the torpedo tank perfectly, its slightly smaller id makes it stay on better. After I polish it tomorrow I'll post a pic.

 

[Justinking]

Awesome everybody, Big help to me, Thanks!!!

 

[JonahNM]

Just got this Stainless Steel 316L Seamless Round Tubing, 3/4" OD, 0.62" ID, 0.065" Wall, 12" Length | SmallParts.com it fits on the torpedo tank perfectly, its slightly smaller id makes it stay on better. After I polish it tomorrow I'll post a pic.

Cool I look forward to seeing it.

 

[Justinking]

Try this tank mod, it is extremely easy and high capacity.

Only pics I can see are the beveled faucet gaskets, I can't see the actual mod :/

 

[VpnDrgn]

Asnider does one here. The only difference is he seals in an adapter so that he just screws in replacement CE2's.
You can do it so that top and bottom are sealed with the washers. I think Scubabatdan did a video on it, check youtube.

edit - Here is a step by step from Para.

 

[sierra22]

The Modder Carto Tank Developement - Vapers Forum

 

[Dudeman]

Just got this Stainless Steel 316L Seamless Round Tubing, 3/4" OD, 0.62" ID, 0.065" Wall, 12" Length | SmallParts.com it fits on the torpedo tank perfectly, its slightly smaller id makes it stay on better. After I polish it tomorrow I'll post a pic.

Still waiting.

 

[Justinking]

Well Just got done with mine, Made it out of a 10ml Syringe, Two American Standard Stem Repair Aqua Seal Washers, and a Smok 2.5 ohm Mega Carto - Washers have two O-rings, and the seal is Seriously Tight, no air Leaks, Looks Just Like a Liquinator. Even tho It's Not A Liquinator, it has the same problems as one, it tends to leak from the Battery Connection end of the carto, but not the tank at all... Been Looking on U tube and other places to see if there's a fix other than trying to push the carto down to close off the holes, but haven't found anything, I was trying to see if you guys may have some suggestions on it, cuz the carto just continues to over fill, and it's drivin me crazy

Before anyone asks what kind of holes or slots there are... There are two Small Drilled holes right where they should be on the lower end of the carto, right above the bottom Tank seal Thanks Guys!

 

[BigBulli]

sorry posted in the vapor-age thread:


there is a gap near the bottom cap, I just needed to push the tube on a little more.

 

[breaktru]

There are so many tanks, here's yet another.....
Dual Coil Juice Tank

 

[Justinking]

ok screw it, I just did something that wasn't done before with it... the previous were just leaking too much, even though i USed rubber seals and o-rings... there's no air leak but it still overfills...So instead I just made it do something else, It works great, no leaks whatsoever, and as long as the rubber remains intact, it'll never leak... might be on to something here! lol

Anyway, will probably post pics soon Thx Guys