You can find this product on the official lost vape website: Q-Ultra Pod Kit – Lost Vape
The lost vape Q-Ultra Aio, is essentially an enhanced orion, a little larger, still maintains the same shape as the previous Orions to which many are accustomed, adopts a 0.69 "LCD screen with adjustable power from 5 to 40W.
RBA available to buy separately, moreover the new pods offer an increased capacity (4,2ml).
The packaging shows on the front the brand, the product name and the relative image of the Q-Ulta.
On the back side are listed: the content, the warnings, logos, trademarks, the anti-counterfeiting security, the indication on the color of the product and the bar code.
Package contents:
1 Q-ULTRA AIO kit
1 0.6Ω UltraBoost coil with 20-28w range (pre-installed)
1 1.0Ω MTL UltraBoost coil with 8-15w range
1 USB Type-C cable
1 Strap shoulder strap
1 User Manual
Six colors available:
Measures and characteristics
Measurements: 105mm x 43.2mm x 16.5mm
Weight: 90g
Battery capacity: 1600 mAh Li-Po battery
Power range: 5-40w in half watt increments
Pod capacity: 4.2 ml, varies slightly depending on the coil used
Reload: quick Type-C
Drip-Tip: Removable
Screen: 0.69 "LCD
Protections: multiple
Air flow: adjustable
Below the new Q-Ultra compared to the younger sisters Q-pro and Orion Plus
Images of the side panels of the Q-Ultra
The first of the two narrow sides incorporates the key to lock / unlock the pod once on / off, below we find the square and beveled fire key in the corners, followed vertically by the 0.69 "LCD screen, the up / down keys and finally the Type-C charging socket.
On the other narrow side you can see a large grid arranged vertically for venting the internal 1,600Mah battery.
Here we see the housing for the pod with the internal part of the locking / unlocking mechanism for the pod itself, the C E mark, the disposal logo and the 2 gold-plated pins that take care of transmitting the voltage to the coil.
An image of the correct insertion of the pod (at the same time it is necessary to lower the hinged coupling mechanism), once the pod is in contact it is necessary to raise the usual mechanism.
In these images below we can see the pod with all its components, coil, air adjustment ring, screw cap and drip-tip (owner)
Depicted below we also see the procedure for refill, coil positioning and the upper air adjustment ring nut.
The lost vape Q-Ultra Aio, is essentially an enhanced orion, a little larger, still maintains the same shape as the previous Orions to which many are accustomed, adopts a 0.69 "LCD screen with adjustable power from 5 to 40W.
RBA available to buy separately, moreover the new pods offer an increased capacity (4,2ml).
The packaging shows on the front the brand, the product name and the relative image of the Q-Ulta.
On the back side are listed: the content, the warnings, logos, trademarks, the anti-counterfeiting security, the indication on the color of the product and the bar code.
Package contents:
1 Q-ULTRA AIO kit
1 0.6Ω UltraBoost coil with 20-28w range (pre-installed)
1 1.0Ω MTL UltraBoost coil with 8-15w range
1 USB Type-C cable
1 Strap shoulder strap
1 User Manual
Six colors available:
Measures and characteristics
Measurements: 105mm x 43.2mm x 16.5mm
Weight: 90g
Battery capacity: 1600 mAh Li-Po battery
Power range: 5-40w in half watt increments
Pod capacity: 4.2 ml, varies slightly depending on the coil used
Reload: quick Type-C
Drip-Tip: Removable
Screen: 0.69 "LCD
Protections: multiple
Air flow: adjustable
Below the new Q-Ultra compared to the younger sisters Q-pro and Orion Plus
Images of the side panels of the Q-Ultra
The first of the two narrow sides incorporates the key to lock / unlock the pod once on / off, below we find the square and beveled fire key in the corners, followed vertically by the 0.69 "LCD screen, the up / down keys and finally the Type-C charging socket.
On the other narrow side you can see a large grid arranged vertically for venting the internal 1,600Mah battery.
Here we see the housing for the pod with the internal part of the locking / unlocking mechanism for the pod itself, the C E mark, the disposal logo and the 2 gold-plated pins that take care of transmitting the voltage to the coil.
An image of the correct insertion of the pod (at the same time it is necessary to lower the hinged coupling mechanism), once the pod is in contact it is necessary to raise the usual mechanism.
In these images below we can see the pod with all its components, coil, air adjustment ring, screw cap and drip-tip (owner)
Depicted below we also see the procedure for refill, coil positioning and the upper air adjustment ring nut.