Lots of Goodies in the Door and on the Shelf ---> Stardust/CE4 510 Drip tip adapter, SMOKtech Carto Punch and Air Flow Controller, GotVapes Convenien

[dannoman]

GotVapes Stardust, ReDuX, CE4 to 510 Drip Tip Adapter
$2.95

CE4 to 510 Drip Tip Adapter! This adapter slips in to any Stardust (regular or rebuildable) ReDux or any CE4 style eGo clearomizer, screws in and then and allows for use of nearly any 510 drip tip!

GotVapes Stardust, ReDuX, CE4 to 510 Drip Tip Adapter [gv-StardustCE4DripTipAdapter] - $2.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

---

Air Flow Controller for eGo batteries by SMOKtech
$2.50

An exciting concept, this threads over your eGo cone threads and provides air flow governance by screwing up or down. It can restrict at the base and also its collar can partially cover air holes in the stem of your tank or carto.

Air Flow Controller for eGo Batteries by SMOKtech [gv-SMOKtechAirFlowController] - $2.50 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

---

Stainless Steel SMOKtech Carto Punch - Durable & Longer Lasting
$7.95

This is the brand NEW improved carto puncher manufactured by SMOKtech in solid stainless steel. Strong sharper tip and material increases the life of the punch!

Key ring lanyard included and installed.

Stainless Steel SMOKtech Carto Punch - Durable & Longer Lasting [gv-SMOKtechCartoPunch] - $7.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

---

The GotVapes Convenience Fill Kit - 10ml
$1.95

This is a nifty pocketable 10ml soft plastic, easy-to-squeeze, fill kit with bottle, silicone attached tip cover and cap with built-in blunt needle for filling.

Get several for your favorite juices and you are good-to-go!

The GotVapes Convenience Fill Kit - 10ml [gv-Convenience10mlFillKit] - $1.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

 

[badkolo]

nice nice nice, i like those alot

 

[AG51]

WHOO-HOO GOODIES !! Great lil stockin stuffers dere you guys !! Thank you !!

 

[kellie]

Stocking stuffers! What a great idea! Your are a genius!

 

[AG51]

Stocking stuffers! What a great idea! Your are a genius!

yeah, wish I had a stockin

 

[Gypzy.Mama]

I'm not allowed to stuff stockings from GV.... Prolly cause I'd spend a couple thousand doing it.

 

[Adrena]

my drip tips will be sooooo Happy<3 thank you Guys <3

 

[priorities]

ooh love those goodies!! thank you!! and Have a great day everyone!

 

[AG51]

GotVapes Elfs have been busy here Peoples Working Hard to Bring Us These GOODIES !!

 

[yiddleboge6]

Can I hang more than one stocking at Christmas?

 

[mikecup]

The air controller really works well, makes the draw much tighter on my original phoenix's. I'm still disappointed with the reborns, hope new batch is better. If there is a new batch?
The drip tip adaptor is very tight, won't accept all drip tips, might be the o rings on them.

 

[dannoman]

Thanks Mike...on the reborns was it just the drip tip you had concerns with?

The air controller really works well, makes the draw much tighter on my original phoenix's. I'm still disappointed with the reborns, hope new batch is better. If there is a new batch?
The drip tip adaptor is very tight, won't accept all drip tips, might be the o rings on them.

 

[dannoman]

LOLLLL....ty Monkeys Mama for makign my day : )

GotVapes Elfs have been busy here Peoples Working Hard to Bring Us These GOODIES !!

 

[mikecup]

Thanks Mike...on the reborns was it just the drip tip you had concerns with?

Dan,
The drip tip adaptor for the stardust doesn't accept all drip tips, not a major problem, I have tried 10 only 5 fit, I guess they are not all created equal.
As far as the phoenix reborns, I know this is not the thread, but they don't wick well at all, I have gone thru a box and all are the same, I have no idea why. I have to squeeze the tube just to get a non burnt taste. The originals have been my favorite since they came out. So I'm hoping something will change with the new batch.

 

[dannoman]

Thanks Mike--I use the reborns and they kind of work same for me but I'll paste your feedback to Betterlife, its much appreciated...

 

[mikecup]

Thanks Dan
I have gone thru 5 boxes of the originals with excellent results. But the reborns are a disappointment. For me anyhow.

Enough of that though.
The MVP is great, nice solid device, its a winner for sure.
Another note on the air controller, not only does it work well, but it puts a nice finishing touch on the ego, covering up the threads. I think I need a few more for sure.

 

[AG51]

Hi !

Aggie here wants ta take a minutes to tell you about some of this stuff here.

The Starduster/510 drip tip adapter is pretty darned cool in my opinions I got one and all of my 510 drip tips with the exception of 2 fit in this wonderful ! I think the 2 that don't fit had too much to eat and got wide in the bottom section just like I have since I came to this forum and spend too much time here

yes peoples, Aggie has a fat Patooties but that's besides the points. I loving the budgie from GV in this adapter on my stardusts

of course I am a budgie lover anyways

Okays, nebermind that. These DO work nicely and even the new Knucklehead drip tips fit into them. They would be great stocking stuffers

The other thing I got here is the lil GotVapes Convenience Fill Kit - 10ml

This lil handy unit is just what I needed ! I have found the needle tip on this is still small enough to fill my SRT II and my Splitfire tanks by sliding it down alongside the wicks. This way I don't have to remove the plug or unscrew anything. The lil tippy thingy-ma-bobs on this bottle is tight nuff so as it don't come off by itself and I can carry this in my handbag vapin container without juice leaking out of it and no more syringes in my carry around stuff

I will be gettin more of these fer sure

Okays, Ova n Out.........Just had to tell ya'lls bout this

 

[burns_erin]

On the stardust adaptor, it works well with the knucklehead, and overall I like it. My only concern is that since it is so smooth, it is rather difficult to unscrew. I rather wish that it had some sort of kneeling.

 

[AG51]

On the stardust adaptor, it works well with the knucklehead, and overall I like it. My only concern is that since it is so smooth, it is rather difficult to unscrew. I rather wish that it had some sort of kneeling.

You're absolutely right on that one Erins, I agree

 

[burns_erin]

You're absolutely right on that one Erins, I agree

On second thought, the other option besides knurling could be to add a lanyard loop like on the battery in the mini kit I just got. It would be both functional and convenient, giving a space to use for gripping and also keeping the pv much more vertical when used on the lanyard, something I prefer.

Does anyone have any suggestions for how to get this adaptor off for refilling, besides carrying around my nubby silicone pot holder?

Hey AG, is this something that can be engraved? I'm not much for artistic stuff, considering I'm hopeless with it, but I may break out my husbands dremel to see about adding some texture if you think it could be done.