Making coil on rba stk mini

[Sandrodec]

I want to make my coils for the rba on the subtank mini for making 1 ohm and 1.5 ohm wich kanthal and how many wraps would i need thanks in advance

 

[Psofos]

Coil wrapping | Steam Engine | free vaping calculators

 

[dbrandt01]

What gauge kanthal do you have?
28g - single coil - 6 wraps - 2.4mm diameter should put you close to 1.2 ohms.
26g - single coils - 9 wraps - 2.4mm diameter should also put you close to 1.2 ohms if my numbers are correct.

sorry, just realized I read it as between 1.0 and 1.5 ohms. I apologize if you meant you want a 1.0 ohm and a 1.5 ohm build.

 

[Sandrodec]

Yeah want build 1ohm coili and 1.5 ohm coili on subtank rba thans allready i need to buy kanthal first if you say 28g and 26g i Will buying these

 

[Sandrodec]

Now i al using à 20 piece pack pre build coils on THE rba section 1 ohm that i bought

 

[dbrandt01]

All of these are 2.4mm in diameter to save on typing.

Try 26g, single coil, 7 wraps for 1.0 ohm
Try 26g, single coil, 12 wraps for 1.5 ohm

With 28g, single coil, 7 wraps for 1.5 ohm
with 28g, single coil, you'd need 4 wraps for 1.0 ohm.

Honestly, I only use 28g more for twisted kanthal builds, I'd think 26g would be easier for the subtank mini rba deck. Kanthal is cheap enough if ordered online from lightning vapes or temco. I run twisted builds in my subtank mini.

 

[RandyF]

I use 28g in my STm. 6 wraps around a 6-32 machine screw (2.5ID) comes out to 1.2Ω. I vape it with the airflow on the 2 holes at 22 watts.

 

[Sandrodec]

Allright thank you Guy's no i can go further