Formula, we all were new to ecigs once upon a time, so dont worry about asking questions.
Firstly I would suggest you joined the Janty Club, just click the link on my signature, as most things and questions re Janty products are covered there.
Right when using an 801 atomiser, its common to drip, plus it helps the lifetime of the atomiser, providing you do not over do it.
So, take out your atomiser, and now remove the cart. Now you can clean the atomiser. Get a tissue or better still a Q tip, and gently clean around the coil inside the atomiser itself. Now take a tissue and twist it gently inside the atomiser to get any fluid on the inner wall, and then clean the outside.
Lastly take the Q tip and clean the connection on the underside.
Now with the underside on top, and a tissue under the open side of the atomiser, blow through the connector. This should remove any
juice within the atomiser.
Now clean up the body of the JS, by taking your tissue and screw it gently into the atomiser shaft, this should remove any fluid or condensation within the shaft.
Ok, you are set to go now...
Replace that atomiser, making sure the connection is fairly tight.
Now take your e-juice, and drop two drops directly onto the coil. I know you cannot, unless you are using a syringe or long dropper be totally accurate, but do it as best you can.
Make sure your cart is full and replace it in the atomiser.
Now hold the JS to your ear... yes I said, ear... press the switch and listen for a hissing sound.. if you hear this all is working as it should.
Now pressing the switch, inhale... release switch when you have almost reached the draw you want... continue to inhale for a second or two... and that should be it... perfection...
Hope that works ok for you.