Merlin by Augvape and Roxy
- Thread starter MMW
- Start date
- th_trl_thread_readers 0
-
- Tags
- augvape merlin single coil
- Status
Im most likely guilty of over tightening. Plus every time i screw fill top on i tighten it a little more.
Sent from my SM-T230 using Tapatalk
Thats why I want to get some better o rings for it.
Sent from my SM-T230 using Tapatalk
I would agree with you if it was not press fitted.Just too much hassle compared to my Kayfun v5's.
Have the kayfuns gotten better? I had the 3.1 lite clone, and it was plastic tank, and really small build deck and juice wick wells.
Sent from my SM-T230 using Tapatalk
All i use now,i have 8 kayfun v5 clones.All work perfectly,no leaks easiest build deck i ever tried and amazing flavor.All parts are easily available and you can fully strip them down.The perfect tank to me.
So I am looking to finally get around to buying better o-rings for the Merlin. I sent the company an email asking for a specific list of all the o-rings and position they go. So far this is what I have. (I am only listing the ones I can reach without unpressing anything)
Quantity : size
1 : 5x1 mm
1 : 8x1 mm
1 : 12x1 mm
1 : 15x1 mm
3 : 20x1.2 mm
One question I have is does anyone know the type of material that the o-rings are made of?
"O-rings are available in several different materials such as PTFE, Nitrile (Buna), Neoprene, EPDM Rubber and Fluorocarbon (Viton)." (source)
Quantity : size
1 : 5x1 mm
1 : 8x1 mm
1 : 12x1 mm
1 : 15x1 mm
3 : 20x1.2 mm
One question I have is does anyone know the type of material that the o-rings are made of?
"O-rings are available in several different materials such as PTFE, Nitrile (Buna), Neoprene, EPDM Rubber and Fluorocarbon (Viton)." (source)
I have no idea what the originals are made of but was told to use buna 70.That is what i use in my kayfun v5's.Here is a link what i use.
Checkout Our Buna 70 Orings | Orings And More.
Thanks. Now I just need to triple confirm the sizes before I buy. Hopefully Augvape emails me back.
I have managed to dodge the bullet on the leakage. Balanced out by one of my fav RTAs the Billow V3 Plus leaking between the base seams. I do hope they fix that. In any case took advantage of eciggity Black Friday and third Merlin on the way. They just have the blacks left. Nothing in my experience rewicks faster than Merlin.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Merlins are better than Kayfuns for building and vaping for me. I use my Kayfuns for tasting new liquids only now.
Does anyone know if there are any mod options available for the Merlin?
It would be sweet to have more juice capacity. I vape my 2 tanks at 30 watts and blaze through juice.
I find that they don't have time to leak or seep anymore with a hotter build in the 0.5 ohm range.
Great vape despite the flaws. my 2 are from STS from the first batch with serial numbers well under 1,000 so I got one with a wonky deck and loose jfc. when @ccwaters makes a Youtube video showing his easy fix i might attempt the fix ( probably not)!!
Wicking is a breeze ( I actually blow on mine to fluff them )!!
Congrats on getting a 3rd merlin
It would be sweet to have more juice capacity. I vape my 2 tanks at 30 watts and blaze through juice.
I find that they don't have time to leak or seep anymore with a hotter build in the 0.5 ohm range.
Great vape despite the flaws. my 2 are from STS from the first batch with serial numbers well under 1,000 so I got one with a wonky deck and loose jfc. when @ccwaters makes a Youtube video showing his easy fix i might attempt the fix ( probably not)!!
Wicking is a breeze ( I actually blow on mine to fluff them )!!
Congrats on getting a 3rd merlin
Never tried the V5. It looks too tall. I've had all the older versions tho. I heard that they're too airy to vape also. I like some restriction when I vape.
Wicking is a breeze ( I actually blow on mine to fluff them )!!
Congrats on getting a 3rd merlin
I've gotten into the habit of wicking a lot more frequently than I have in the past. Don't know if it's the juice I use but I don't go through more than two tanks without rewicking. The vape just tastes better. Flip the Merlin upside down, unscrew and everything is right there easily accessible. I don't have enough patience to remove chambers and to fiddle with those old style Griffin-like wells that take extra time. For me anyway. I don't want to spend more than five minutes if possible.
Sent from my iPhone using Tapatalk
When I rewick my Merlins I fill the tank from the liquid feed holes before putting it back together. I find I can get a little more liquid in them and it makes the whole process quicker.
I would agree. I had one of the older Kayfuns, but that thing was tiny, and had so many parts that had to be cleaned when I would rebuild it. I just looked at some of the newer Kayfuns, and they still look like they have a very small build deck and a lot of parts.
I wouldn't mind if Merlin's top juice fill holes were larger. I used a syringe for the first time yesterday for grins because you have to be extra careful with glass droppers.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Status
