Merlin by Augvape and Roxy

[Shawn Hoefer]

Does anyone here have the eagle ?

I do not. As I understand it, and from looking at it closely, it is nothing more than a Griffin with coil heads. As I already have both Griffins (and both Geminis negating the need for top air Griffins), I'm giving the Eagle a pass. I would be interested in hearing... uhm... reading... any one else's thoughts.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[mgmrick]

Last wick...

This setup..... not enough wick. It will leak

 

[mgmrick]

New wick

Better but may still leak... I use more wick in the deck. In the holes is good don't go more than 1/3 of the way into the holes. It will fill in as cotton gets wetter

 

[mgmrick]

My zero leak setup.... 1 ohm coil running 70pg at 26 watts..juice control wide open

 

[hittman]

I just rewicked mine and paid closer attention to not getting any wick on the top near the air hole. I'll see how this one goes.

 

[tmcase]

When I click I get this message:

This website has been reported as unsafe
www.efun.top
We recommend that you do not continue to this website. It has been reported to Microsoft for containing threats to your computer that might reveal personal or financial information. If you do download something, it might install other programs you don't want or change your settings (like your home page). So be sure to carefully review what's being installed.

• 
  Go to my home page instead
  
• Continue to this site

More information 
This website has been reported to contain the following threats:

• Malicious software threat: This site contains links to viruses or other software programs that can reveal personal information stored or typed on your computer to malicious persons.

• Disregard and continue (not recommended)

Microsoft SmartScreen

It is possible to be a fake message. Please let me know if you've got the same message?

I use Google Chrome on my PC and I didn't get that msg although I have seen it before on other sites.

 

[MMW]

Hi all... Been a silent reader all these time and decided to join and contribute to the community...

Grab a Merlin a couple of weeks back. Like the flavour so far, but not so much about leak and seepage. Sometimes it's just a little bit other times is a lot worse. And keep reading a lot of what others do to fix their problem.

I got a new Merlin I think, since my JFC is not circle, and wondering why I got this problem when it suppose to be not. So a couple of days back I tinkering with the wicking which I think had cured my leaking/seepage problems. So hopefully it can cure some member who still got the same problem with their Merlin.

So here's what I did (the picture is what my merlin looks like after a couple of refills)

I make sure my wick is stay clear from touching the deck with Airflow, I marked it with the red arrow above.

and for the wick on the juice channel, I just gently pushed it up the top circle part until I can see the Juice hole got no wick left and check back the wick again on the center to make sure it still not touching the deck with Airflow, and make adjustment if they do touching.

and after 2-3 refill I noticed the wick is coming down half circle.

So far its great, I even try to refill without closing the JFC and no leaking.
I don't know if this will work for some of you who got these problems, but hopefully it does.

ps : Sorry if my english is far from perfect, english is not my main language

Welcome! Nice job on wicking.

 

[philbh]

Hi all... Been a silent reader all these time and decided to join and contribute to the community...

Grab a Merlin a couple of weeks back. Like the flavour so far, but not so much about leak and seepage. Sometimes it's just a little bit other times is a lot worse. And keep reading a lot of what others do to fix their problem.

I got a new Merlin I think, since my JFC is not circle, and wondering why I got this problem when it suppose to be not. So a couple of days back I tinkering with the wicking which I think had cured my leaking/seepage problems. So hopefully it can cure some member who still got the same problem with their Merlin.

So here's what I did (the picture is what my merlin looks like after a couple of refills)

I make sure my wick is stay clear from touching the deck with Airflow, I marked it with the red arrow above.

and for the wick on the juice channel, I just gently pushed it up the top circle part until I can see the Juice hole got no wick left and check back the wick again on the center to make sure it still not touching the deck with Airflow, and make adjustment if they do touching.

and after 2-3 refill I noticed the wick is coming down half circle.

So far its great, I even try to refill without closing the JFC and no leaking.
I don't know if this will work for some of you who got these problems, but hopefully it does.

ps : Sorry if my english is far from perfect, english is not my main language

Thanks for the pics and pointers

 

[philbh]

Did you dry burn that coil? It looks filthy

I don't like to dry burn nickel . Just a hot water bath and wipe it dry

 

[EyesoreJr]

No idea but for the sake of an extra $6 i would get one from subtank supply.Free shipping and it will be at your door in a couple of days plus they have great customer service,they are based in Kentucky.

I just got one from subtank supply and it was a v1.5. New base but v1 of the rest.

 

[Fozzy71]

Did any of you get yours from efuntop?
Just wondering if they have the latest version.

Yep I ordered from efun.top and it is the latest one.

http://www.efun.top/augvape-merlin-rta-atomizer-4ml.html?mw_aref=94bb7442d7206d9875cbfa1725887f60
15.99 ss
16.99 black

I got 2 of the SS in my cart that I plan to order next week.

No idea but for the sake of an extra $6 i would get one from subtank supply.Free shipping and it will be at your door in a couple of days plus they have great customer service,they are based in Kentucky.

I got one from STS, and one from Eciggity. Both excellent service and quick shipping, maybe an extra 2 day wait on delivery with Eciggity. OTOH, I had some questions for customer service at eciggity, and found them helpful and extremely quick to respond. STS might very well have the same excellent CS, I just haven't tried it so I can't judge it. I've also gotten other tanks from eciggity and again always happy.

STS is closer to me for shipping though so standard mail shipping does arrive faster.

STS and eciggity are basically double the price:
- Augvape Merlin Two Post Flavor RTA
- Merlin RTA by Augvape

 

[philbh]

I have plenty of hardware to keep me busy, so a 2 week wait is no problem. I am happier when it arrives if I have to wait. I ordered an RX200 on 7/6 with free priority shipping for $27 from Code 3 Vapor (US), and they also threw in a free Rta. Postal tracking shows it was picked up the same day, and they must have lost it because no other info is shown. So sometimes shipping front China is faster..... Anyway I'll be happier when it finally gets here!

 

[Cumulo Vapus]

i order one from efun 3 weeks ago and got the version 1 with round juice holes.

 

[hittman]

My latest wick is working great. I put more wick in the holes than I've seen in other people's pics but it's still wicking well and not leaking at all yet.

 

[ricks]

i order one from efun 3 weeks ago and got the version 1 with round juice holes.

The one with round holes works the same. I really don't think it makes any difference at all.

 

[ricks]

My latest wick is working great. I put more wick in the holes than I've seen in other people's pics but it's still wicking well and not leaking at all yet.

I fill my holes completely with my 100% PG. I tried them half closed and they flooded.

 

[Eskie]

The one with round holes works the same. I really don't think it makes any difference at all.

They changed the juice hole punch size after several complaints of dry hits, assuming the holes were the limiting factor. However, the one I got from STS had a swapped out new base with rectangular/oblong holes, with the "original" round on the chimney. The one from eciggity was a v2 with oblong on both chimney and base. I can't tell any difference, and never had a dry hit from either.

 

[DP2Raja]

Same here. I have V1 and V2 and they both seem to function the same. 80VG and no problem with either.

 

[Vinnybagodoughnuts]

Thanks everyone! Mine is on the way!! Can't wait.......

Its all Ricks fault.

 

[MMW]

Woooooot! Effin' Rick!