Micro Coils to increase Vapor, flavor & TH

[SLIPPY_EEL]

the wire is holding up the weight of my jig
it prob would have held up the G-clamp in the background no probs



Reme41
between 20 & 21 gauge (1mm)
2mm id 11wrap
bouncing around 0.1-0.2Ω on the multi-meter
installed it in the Rm2 but cus of the angle of the leg it kept springing itself back towards the post, after blowing two fuses I decided to leave this build for another day


I'm gonna try wrap a diamond coil with this beast wire to get more wire into the build

 

[Whiplash205]

Can someone post a wicking method for a rda with a single coil that will cover the other side of the rda with wick to soak up extra juice?

I wanna be able to dripp as much cotton as I can so the wick doesnt get dry as faster. Also a method that covers the top of the coil too.

Reo. Extra juice should stay in the bottle nice and fresh, not in cotton on the deck getting cooked.

Sent from my EVO using Tapatalk

 

[Idaholandho]

For all you microcoilers out there, how are you building your origens? I've never had any problems with my micro coil builds in standard drippers, but for whatever reason this one is giving me some trouble. I rebuilt my vertical coil with a horizontal and it's a little better, but I still think it could be even better. Any ideas?

Here is the test fire

There is a ton of builds on UK vapes for the O v1 on Norberts thread.

 

[Idaholandho]

I prefer the cyclone because it's SS. Not a big fan of brass in the juice path anymore. I know sometimes it's unavoidable and you can pickle it to remove surface lead too, but since there are SS options, I started to opt for them.

Additionally, I found that with the RM2, possibly because of the semi hollow ceramic shelf, would sometimes leave juice in the catchcup unless I used a thick oring in the catchcup and really wrenched down on the base.

My theory is that juice collects under that shelf and in some situations, like overnight, or when not used for a while, will rapidly drain out thru the slots in the 510. Dunno.

I get zero juice in the catchcup with cyclones and chalices. Yes the catchcup was made for juice but I'm a little OCD about juice anywhere outside the RBA and juice bottle.

But vape wise they can both be built to provide an exceptional vape.

Thanks SX. I noticed after it was sent the brass. Not a fan myself. I will vape it today a bit(still a virgin) but do not see it as a keeper because of it. I will be in a pickle soon with another order of REO's and fewer atomizers available right now. I would punch a nun for a Chalice and the Dbug is ready for trade.

 

[super_X_drifter]

Thanks SX. I noticed after it was sent the brass. Not a fan myself. I will vape it today a bit(still a virgin) but do not see it as a keeper because of it. I will be in a pickle soon with another order of REO's and fewer atomizers available right now. I would punch a nun for a Chalice and the Dbug is ready for trade.

Yes a chalice is an atty I'd slap a sister or two for myself. Thankfully mine were acquired in a less less violent and sinful manner.

Several friends picked them up off the want add section of the classies. I always recommend just stating what you want and let the other party state what they want for it rather than offering possibly more than the other party was thinking.

I also see a FT thread with the doodlebug for chalice

Just be aware that the first run chalices had brass posts and feed tube. They have threaded posts and different screws. A great atty but the brass is why I sold mine.

Second run had no brass but funky screws that didn't like tools.

Third run is same as Second run but with new flat head screws that also work in second run.

 

[Idaholandho]

Yes a chalice is an atty I'd slap a sister or two for myself. Thankfully mine were acquired in a less less violent and sinful manner.

Several friends picked them up off the want add section of the classies. I always recommend just stating what you want and let the other party state what they want for it rather than offering possibly more than the other party was thinking.

I also see a FT thread with the doodlebug for chalice

Just be aware that the first run chalices had brass posts and feed tube. They have threaded posts and different screws. A great atty but the brass is why I sold mine.

Second run had no brass but funky screws that didn't like tools.

Third run is same as Second run but with new flat head screws that also work in second run.

Again with the no less than awesome photo's SX. I could stare it most the day my friend.
I was on the last Chalice in the classifieds and found the post was brass so, I bailed. I actually am filled with patience, been playing this game too long to over pay, support a flipper or the intent to even give a heartfelt noogie to one pursuing their spiritual goals for a chance to own one.
As always Thanks for the advice, it is always welcome! I feel like I need to be billed weekly from you Brother.

 

[Alexander Mundy]

Same R41 as SLIPPY_ELL, .030" diameter and about 14" per ohm.
Somewhere between .2 ohm and .3 ohm.
Tried on my SX350 mod at 35 watts and my 20A VV mod at 4 volts.
Very good vape once it gets some heat in it, but heat up and cool off lag are too much.

 

[johni]

Same R41 as SLIPPY_ELL, .030" diameter and about 14" per ohm.
Somewhere between .2 ohm and .3 ohm.
Tried on my SX350 mod at 35 watts and my 20A VV mod at 4 volts.
Very good vape once it gets some heat in it, but heat up and cool off lag are too much.

Well, you can make springs for your trailer with the rest of it!

 

[DejayRezme]

Yikes, what is the black stuff between the wraps, is that burned / condensed eliquid? Or does it just look so black because of the kanthal? Now I'm scared to look into my atty.

 

[Alexander Mundy]

Yikes, what is the black stuff between the wraps, is that burned / condensed eliquid? Or does it just look so black because of the kanthal? Now I'm scared to look into my atty.

That's just juice. It isn't actually black it's just the way the lighting refracted in the photo.

 

[SLIPPY_EEL]

nice job also Mundy is a shame they don't make it between the two sizes we have already, would be just right..
i'll sure the rest will come in handy for something, wrapping 26g nano's onto maybe lol..


Below I've got 0.8x0.1mm A1 Ribbon
0.6Ω
4/3 wrap
on 2mm voodoo
RM2 with SS ScrewsOfDestiny from StealthVape(these shouldn't wear out to easily)
Peach & Pear juice mmmm

 

[Aal_]

So I've been working with the MUJI unbleached cotton. I'm not sure about one thing. I'm getting a metallic taste sometimes. I'm not sure it is the cotton or the wire. Can it be the wire because I dry burn it before rewicking? Or with a new coil? I'm not sure. Does it happen with KGD? It is just like the first few minutes of the vape. I hope it is not the cotton. I don't want to go look again for KGD that ships internationally

Sent from my SM-N9005 using Tapatalk

 

[super_X_drifter]

So I've been working with the MUJI unbleached cotton. I'm not sure about one thing. I'm getting a metallic taste sometimes. I'm not sure it is the cotton or the wire. Can it be the wire because I dry burn it before rewicking? Or with a new coil? I'm not sure. Does it happen with KGD? It is just like the first few minutes of the vape. I hope it is not the cotton. I don't want to go look again for KGD that ships internationally

Sent from my SM-N9005 using Tapatalk

Never had that problem with KGD bro.

 

[Idaholandho]

So I've been working with the MUJI unbleached cotton. I'm not sure about one thing. I'm getting a metallic taste sometimes. I'm not sure it is the cotton or the wire. Can it be the wire because I dry burn it before rewicking? Or with a new coil? I'm not sure. Does it happen with KGD? It is just like the first few minutes of the vape. I hope it is not the cotton. I don't want to go look again for KGD that ships internationally

Sent from my SM-N9005 using Tapatalk

A good friend of mine in Greece also could not find it to ship to Greece so I ended up ordering and sending a few boxes for him. I could probably send you at least a bit in a package.

 

[Aal_]

A good friend of mine in Greece also could not find it to ship to Greece so I ended up ordering and sending a few boxes for him. I could probably send you at least a bit in a package.

Thanks my friend, but our good friend xtreme101 already took care of me. And fairly fast too lol. Kudos to the micro coilers family and friends.

Sent from my SM-N9005 using Tapatalk

 

[Aal_]

I was really hoping this MUJI works out well. I still believe it is the same as KGD. Something is wrong with my coil. Read my next post.

Sent from my SM-N9005 using Tapatalk

 

[Aal_]

So friends and family. Anyone micro coiling a KFL? I know I do. So i have this microcoil that is still going since 10 months no kidding. I can't remember how I did it but It is great. Now I have my other kfl which I'm trying to coil. 8 wraps 28g around a 1.55 mm. 1 ohm. Cotton wick. Dry hits all the time. It is a 15 watts coil. Dry hitting like there is no tomorrow. I know how to wick a KFL I've been doing it to my other one for 10 months. Maybe I should run it less? How are your experiences with the high wattage kfl?

Sent from my SM-N9005 using Tapatalk

 

[DejayRezme]

That's just juice. It isn't actually black it's just the way the lighting refracted in the photo.

When you can make a coil and photograph it so that people can't decide whether it belongs into /r/coilporn or into /r/coilgore, you become a true artist in the fine art of coil wrapping!

 

[MasterofNone]

I need to go look at reddit lol


Sent from my iPhone using Tapatalk

 

[sedge]

26g
7wrap
1.6 ID
Ko Gen Do organic cotton
Copper Detouche Taurus on a BCV XXIX

New Wide Bore Trippy Tip cobalt pyrex