Micro Coils to increase Vapor, flavor & TH

[Idaholandho]

My first attempt at sub ohm with Alexander Mundy's Magic Twisted Ribbon. 4 wraps 1/16 ~ .55 ohms using Kanthal A Ribbon resistance heating wire 0.6mm X 0.07mm on VA Cyclone.

Stud. That is all. Close thread Russ .

 

[treehead]

My first attempt at sub ohm with Alexander Mundy's Magic Twisted Ribbon. 4 wraps 1/16 ~ .55 ohms using Kanthal A Ribbon resistance heating wire 0.6mm X 0.07mm on VA Cyclone.

Very nice, that's what I like my MMR at too about .5 or lower, it makes great flavor and vapor all around. It doesn't allow the juice to escape until it's actually vapor that' what I like. In my immortalizer (what I usually put the magic ribbon in), I usually get spit back because of the airflow right underneat the drip tip, but with mundys magic ribbon under .5, it gives an amazing amount of fluffy vapor (with no spit back), as well as the legendary flavor.

This five pawns Castle Long was TOO strong in this .4 setup, it brought out the bourbon backnot until it was intense.

 

[Aal_]

My first attempt at sub ohm with Alexander Mundy's Magic Twisted Ribbon. 4 wraps 1/16 ~ .55 ohms using Kanthal A Ribbon resistance heating wire 0.6mm X 0.07mm on VA Cyclone.

Nice one xtreme101. It is a beast of a wire! Goes through liquid like crazy!

 

[Aal_]

I'm really liking this Odin. It is a very thick vapor producing atomizer. Loki Labs, the creator, confirmed on redit that there is a bottom fed version a few weeks out

And you will let us know before it solds out? Lol. Really interested to getting one now.

 

[super_X_drifter]

And you will let us know before it solds out? Lol. Really interested to getting one now.

Loki labs (the maker) is talking about it now on redit. If you search for Odin atomizer, there's a thread called "Odin is in the house all hail the all father"

It would be nice for other feeders to comment, right now I'm the only one suggesting to place the feed hole at deck level. He's placed it 2mm up in his prototype.

With those big juice wells, a hole higher than the deck would mean a lot of liquid remaining in the wells beyond what the wick can absorb. That's not good. It'll mean floods and leaks.

The way turbo did it with the holes at deck is perfect. It drains as well as it feeds and leaves the wick fully saturated and allows several or more big , video style hits between squonks.

 

[KurrptSenate]

Went to the new vape shop and showed off my dual 18650 bap DNA I put together. Worker asked me if I tried out rayon yet and I told him I wanted to but didn't get a chance yet. He wound up giving me like a 5 month supply for free.

Very pleases with this

 

[MasterofNone]

Loki labs (the maker) is talking about it now on redit. If you search for Odin atomizer, there's a thread called "Odin is in the house all hail the all father"

It would be nice for other feeders to comment, right now I'm the only one suggesting to place the feed hole at deck level. He's placed it 2mm up in his prototype.

With those big juice wells, a hole higher than the deck would mean a lot of liquid remaining in the wells beyond what the wick can absorb. That's not good. It'll mean floods and leaks.

The way turbo did it with the holes at deck is perfect. It drains as well as it feeds and leaves the wick fully saturated and allows several or more big , video style hits between squonks.

Where on the page are they talking about it Russ. Wanted to post about the feed hole but can't find it


Sent from my iPhone using Tapatalk

 

[super_X_drifter]

Thank you. Here's a link:

http://www.reddit.com/r/electronic_.../odin_is_in_the_house_all_hail_the_allfather/

 

[super_X_drifter]

Thank you. Here's a link:

http://www.reddit.com/r/electronic_.../odin_is_in_the_house_all_hail_the_allfather/

My man ethermion has already joined in. The more of us that speak up will increase your chances of getting one with holes in the right place

 

[turbocad6]

guys that are used to dripping think that the more juice it holds the less they have to drip, when they think of bottom feeding they think their goal is the same, to have a squonk feed as much juice as the well can hold to simulate the way they drip so they think the hole should be a bit higher so the well holds more juice, but once you really get to know bottom feeders you realize that we really don't want the same thing as a dripper, we want just enough juice to saturate the wick/coil and that's it, we want all excess drained back for the best saturation without any excess juice in the atty... that's the benefit of bf over drip, you don't need nor want to have enough juice for many pulls before squonking again because squonking is not an inconvenience like dripping, we can get away with less wick and less excess juice for an ideal vape each hit

 

[UKPaul]

Hi everyone.

I havn't been paying attention to the cotton threads (KGD & Rayon) as I have been satisfied with my normal cotton.

Are they an improvement over normal cotton and does anyone know where I can find some in the UK.

I think I found some KGD on Amazon a while back but they didn't ship to the UK.

Or is there a thread where I can do some homework.

 

[ethermion]

My man ethermion has already joined in. The more of us that speak up will increase your chances of getting one with holes in the right place

When X speaks, e listens.

 

[MasterofNone]

I have to actually join reddit to post? Ugh lol


Sent from my iPhone using Tapatalk

 

[ethermion]

I have to actually join reddit to post? Ugh lol
Sent from my iPhone using Tapatalk

Yeah, that's the way it goes these days. Too many scum bags out there to allow anonymous posts.
Joining does not require any personal info. Sign up as MasterOfPickles if you like. No email to back it up necessary.

Toughen up dude. Take one for the team. Sign up and back up the X.

A USA made atty that makes the X happy is a good thing. X is much less interesting when he is not happy. And you have been on this thread long enough to know that there will be 2000 posts if the "hole" is 2mm too high.

Do it, for all of us.

-e

 

[MasterofNone]

He'll I'll be one if those posters... Lol. Yes sir! Right away sir! Actually as soon as my son goes home, sir! Lmao


Sent from my iPhone using Tapatalk

 

[SLIPPY_EEL]

Hi everyone.

I havn't been paying attention to the cotton threads (KGD & Rayon) as I have been satisfied with my normal cotton.

Are they an improvement over normal cotton and does anyone know where I can find some in the UK.

I think I found some KGD on Amazon a while back but they didn't ship to the UK.

Or is there a thread where I can do some homework.

Go and PM Davetherave, if you flick through the last few pages of the rayon thread you shall find him, he ordered a mammoth size box of rayon and has been giving it away to get all the uk guys interested, ask him to show you the picture of himself holding the box while your at it
As regards the cotton pads go to ebay japan and search for muji cotton pads, there are bleached and unbleached, make sure you get the unbleached, Alwanni put me onto them

 

[Aal_]

Go and PM Davetherave, if you flick through the last few pages of the rayon thread you shall find him, he ordered a mammoth size box of rayon and has been giving it away to get all the uk guys interested, ask him to show you the picture of himself holding the box while your at it
As regards the cotton pads go to ebay japan and search for muji cotton pads, there are bleached and unbleached, make sure you get the unbleached, Alwanni put me onto them

Glad the muji is working for you. You know I used up only 1 and a half pads before the rayon fiasco. Crazy hobby we have here. BTW I haven't replied to ur pm yet. That's silly of me but will get to it .

 

[SLIPPY_EEL]

guys that are used to dripping think that the more juice it holds the less they have to drip, when they think of bottom feeding they think their goal is the same, to have a squonk feed as much juice as the well can hold to simulate the way they drip so they think the hole should be a bit higher so the well holds more juice, but once you really get to know bottom feeders you realize that we really don't want the same thing as a dripper, we want just enough juice to saturate the wick/coil and that's it, we want all excess drained back for the best saturation without any excess juice in the atty... that's the benefit of bf over drip, you don't need nor want to have enough juice for many pulls before squonking again because squonking is not an inconvenience like dripping, we can get away with less wick and less excess juice for an ideal vape each hit

there's definatly good & bad in both, when i first started out dripping i was using stupid little narrow bore DT's that ment i had to keep taking the cap or DT off to drip, that becomes a chore real fast but so does squonking, i havent squonked for about 4 weeks now & i definatly havent missed it, if you like to sit down and have a proper vape sesh then squonking & waiting for the wick to saturate and excess to drain every toot or so is a royal pita imo
i also found myself using less & less juice in the squonk bottle as time went on & was only putting in 1ml at a time so i could change flavour more often.
now i have widebore DT's that i can drip straight through, its much faster, i now just leave a few differant flavours on the side with caps off ready to drip, i still use minimal amount of wick like i used to with squonking so im constantly dripping but atleast i wont get squonkers finger!
no faffing about cleaning/installing squonk tube and bottle anymore, no stupid juice in places it shouldnt be

overall its quicker, cleaner! i love it!

 

[SLIPPY_EEL]

Glad the muji is working for you. You know I used up only 1 and a half pads before the rayon fiasco. Crazy hobby we have here. BTW I haven't replied to ur pm yet. That's silly of me but will get to it .

which pm lol!?

yeah the muji, i only got through 2 or i was on my 3rd, something like that

 

[MasterofNone]

I tried going back to a tube. It's just so... Inconvenient. Meh. $37 to remind myself squonking rules over all


Sent from my iPhone using Tapatalk