Save here, his video for updating the reo to new parts helped tremendously.
-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
Micro Coils to increase Vapor, flavor & TH
- Thread starter super_X_drifter
- Start date
- th_trl_thread_readers 0
- Status
Fantastic, and very worthy. The difference of those builders who show the desire to learn from ordinary everyday vapors is encouraging, makes a big difference and makes me want to support them. Thanks SX and so you know, I don't consider you ordinary broI received a PM from the manufacturer (Loki Lab) of the Odin - Craig - basically thanking me for the positive feedback and praise of the Odin
He was also telling me about how he's been testing different sizes and positioning of the feed holes for the upcoming bottom fed Odin. The dude is passionate about his products. I like it. He even grabbed a REO to facilitate his testing. Pretty damn cool I'd say. He was persuaded to venture into the bottom fed version of the atty by another (forum?) called HEM. My praise to the HEMmers
Since it's so rare to participate in such interactions, it further amped my enthusiasm for this already venerable rda - the Odin - I recently purchased.
Figured that was worthy of sharing.
HEM...yawn.
So X how much longer till modders start sending you gear for review??
Half joking, but then again, "what does the guy that invented the micro coil think?" that's what I would want to know.
Half joking, but then again, "what does the guy that invented the micro coil think?" that's what I would want to know.
^ thanks to you guys for the compliments. Damn. That's nice stuff to hear. You guys make me enjoy putting together these videos and I'm sure I've learned from you and enjoy your contributions
I am just a dad, husband and vape enthusiast (albeit a narrow minded one) That's it. No other hidden me (I don't think)
And I don't think I fit the profile of the person to get free gear to review. I only walk thru products I like and intend to use
I make these little vids as a hobby. Never imagined they'd be so well received by the people that make this thread and the areas I hang on ECF what they are.
Thank you guys. You started my day off on a killer note
I am just a dad, husband and vape enthusiast (albeit a narrow minded one) That's it. No other hidden me (I don't think
)And I don't think I fit the profile of the person to get free gear to review. I only walk thru products I like and intend to use
I make these little vids as a hobby. Never imagined they'd be so well received by the people that make this thread and the areas I hang on ECF what they are.
Thank you guys
. You started my day off on a killer note
Last edited:
And just a note on that theme, even a slight variation (.01 ohm) will give you a small hot spot on one coil vs the other.
I received a PM from the manufacturer (Loki Lab) of the Odin - Craig - basically thanking me for the positive feedback and praise of the Odin
He was also telling me about how he's been testing different sizes and positioning of the feed holes for the upcoming bottom fed Odin. The dude is passionate about his products. I like it. He even grabbed a REO to facilitate his testing. Pretty damn cool I'd say. He was persuaded to venture into the bottom fed version of the atty by another (forum?) called HEM. My praise to the HEMmers
Since it's so rare to participate in such interactions, it further amped my enthusiasm for this already venerable RDA - the Odin - I recently purchased.
Figured that was worthy of sharing.
This is great to hear. As vaping becomes bigger, there's going to be modders that continue to listen to feedback and react to it, and those that push their designs out with the 'take it or leave it' attitude. Guess who's going to prosper? My opinion of Loki Labs just shot up by a lot.
I don't squonk, nor do I drip that much anymore, but hearing stuff like this makes me want to go out an buy an Odin just to support the guy.
Thanks for giving me another name to add to the 'good guy' list.
^ thanks to you guys for the compliments. Damn. That's nice stuff to hear. You guys make me enjoy putting together these videos and I'm sure I've learned from you and enjoy your contributions
I am just a dad, husband and vape enthusiast (albeit a narrow minded one) That's it. No other hidden me (I don't think
And I don't think I fit the profile of the person to get free gear to review. I only walk thru products I like and intend to use
I make these little vids as a hobby. Never imagined they'd be so well received by the people that make this thread and the areas I hang on ECF what they are.
Thank you guys
It is all you Bro.
It is just refreshing to me when I come across vapors who aren't in this game to pad their ego or prove themselves only to themselves. Some of you know I get frustrated on ECF with those that talk down to others, use the title noob, and cant find the time to help someone along without hesitation and respect.
SX you, the others on this thread that I have gotten to know the posts I've seen and a bit are a perfect fit for this community. Thanks
Thank you Opl. The moderators found out that I sometimes have issues with the vaping elitists in the green pastures in which we graze .
in the green pastures in which we graze . This is the 'ol aal I know and love!
I <3 a single microcoil 0.8 ohms on my kayfun and a dual 0.5 ohm microcoil build on my Zenith V2 dripper have tried other builds but nothing tastes better. Have gone from needle size to 5/64ths, tight wrap. Still a NOOB, but I'm pretty good
have tried other builds but nothing tastes better. Have gone from needle size to 5/64ths, tight wrap. Still a NOOB, but I'm pretty good
I <3 a single microcoil 0.8 ohms on my kayfun and a dual 0.5 ohm microcoil build on my Zenith V2 dripper
where are your air hole inlets in relation to that wall of cotton? might want to try and move those coils out towards the outer edge a bit and don't put cotton between the coil and the air inlets
OK, most of us have been rebuilding for a while and maybe its just me but, raise your hand if you would would suggest a Kayfun or Russian as a beginner RBA?
How about if they had no multimeter or mech and planned on using a regulated mod?
How about if they had no multimeter or mech and planned on using a regulated mod?
here's a modified 22 mm bottom feeding atty, built from an original origen V2. new stainless steel feeding deck with new posts, still uses the original upper air flow cap.
That looks great. Bone dry drainage as I see. Great plumbing.here's a modified 22 mm bottom feeding atty, built from an original origen V2. new stainless steel feeding deck with new posts, still uses the original upper air flow cap.
Yes... and yes only if the Regulated Mod could check resistance, if not, Harbor Freight has multimeters ~$6.00-8.00.
TC that is, once again, brilliant work. The squonk hole looks perfect. I bet it fills quickly and evenly a drains quickly.
I like the posts position. Perfect for air hole placement.
here's a modified 22 mm bottom feeding atty, built from an original origen V2. new stainless steel feeding deck with new posts, still uses the original upper air flow cap.
I want one
. That is BEAST turbo. Dude, you are a BEAST modder. Rock on TC6
- Status
Similar threads
- Locked
