Mini Protank II

[omyeyes]

Just got 2 of them and took them to my local vape shop and I had them drill the air holes a teensy bit larger. Much better vape!!!! Has anyone else tried this???

What makes me angry about this is that I had to also replace the drip tips because of the schmootzie skin factor buildup. Now I've changed the whole look of the tank that looked great (I thought) to begin with. Darn it!

 

[Craig_B]

My mini was kinda airy but I did open up the holes on my pt2 and that did help it a bunch

 

[Alter]

I didn't drill the holes but just finger twisted with a drill bit the holes a little bigger. I gradually drilled and tested to have the draw I wanted. I drilled a base right through before trying to get better air and found that the holes were too big and I went from 1 extreme to the other. The metal is soft so with a new bit it was fairly easy to do.

 

[omyeyes]

I didn't drill the holes but just finger twisted with a drill bit the holes a little bigger. I gradually drilled and tested to have the draw I wanted. I drilled a base right through before trying to get better air and found that the holes were too big and I went from 1 extreme to the other. The metal is soft so with a new bit it was fairly easy to do.

Nice! I'm not that handy!!!

 

[Photogirlkim]

Wow, I like an airy vape but my mini gives that to me. I would love to do that on my pt 2

 

[AdamGott]

I taped one of my holes closed because I thought that it was too airy. Was this not the correct applied theory?

 

[Getndusty]

I ported just one hole in the mini.. Vapes more like the full sized version now.. With 1.8 ohm 28 gauge kanthal cotton wicked coil

 

[pipster]

I can't get my fekking PT2 mini off of my ITVV3.. it seriously will not budge! Anyone ever experience this? I am afraid if I use pliers to get it off it will strip the threads, if they aren't already..

 

[GetVaked]

I had to cover one hole to make in enjoyable for myself.

Is anyone's Mini top cap/post slightly crooked? It doesn't affect performance at all, but it makes my top cap sit slightly at an angle. I feel very OCD about it and want to bend it, but don't want to damage it. Oh well I guess. China QC.

 

[erikbal]

I can't get my fekking PT2 mini off of my ITVV3.. it seriously will not budge! Anyone ever experience this? I am afraid if I use pliers to get it off it will strip the threads, if they aren't already..

Try putting a rag or something around it then use some pliers on the rag to turn it. Do it really gently just enough to break it loose. Hopefully you can figure it out. Then make sure next time just to tight it snug, they don't need to be very tight.

Sent from my DROID4 using Tapatalk

 

[eMats]

I can't get my fekking PT2 mini off of my ITVV3.. it seriously will not budge! Anyone ever experience this? I am afraid if I use pliers to get it off it will strip the threads, if they aren't already..

Wrap pliers with enough cloth so it doesn't scratch the tank... or leave it on. It's a good tank! You can just fill and change heads by turning the device upside down. LOL.

 

[GetVaked]

I broke the threads off on my mini pt 2 last night trying to bend the stem straight. They are pretty weak. Bought another for 15$ at my local b&m because this tank truely is awesome on my Winders. This one is much better, not crooked. Going to get another soon. Atleast I have a spare tube and parts from the broken one.

 

[omyeyes]

Just broke my glass this AM on my mini Protank II. Don't even know how it happened.

 

[Ohms Lawbreaker]

Can't you just feel it, the second before you drop it? You know it's going to pop out of your fingers and disintegrate in the sink or on the floor, but you are powerless to stop it.

 

[omyeyes]

Can't you just feel it, the second before you drop it? You know it's going to pop out of your fingers and disintegrate in the sink or on the floor, but you are powerless to stop it.

I was cleaning it out in the sink and it did hit the stainless steel but I didn't think it broke. Oy, what a klutz!