I have only had my mod for a day. The battery is fully charged. Yesterday i would press the firing button and it wouldnt work everytime but sometimes it would. Today I go to take a hit and it doesnt work. I was messing around with it and it worked once. Its a hcigar m16 sentil with a hcigar helios rda and efest 18650 2000mah battery.
Mod not firing
- Thread starter Austinf100
- Start date
- th_trl_thread_readers 0
- Status
Here's what I'd do...
Double check your coil connections inside the atomizer. Verify the resistance using a meter.
Disassemble the mod and clean all threads (both male and female) with alcohol and Q-Tips including the threads on the bottom of the atomizer.
Disassemble and clean the switch mechanism also with alcohol and Q-Tips.
Make sure to do the above thoroughly..then reassemble and test.
Post back with your results and let us know how you made out...
Double check your coil connections inside the atomizer. Verify the resistance using a meter.
Disassemble the mod and clean all threads (both male and female) with alcohol and Q-Tips including the threads on the bottom of the atomizer.
Disassemble and clean the switch mechanism also with alcohol and Q-Tips.
Make sure to do the above thoroughly..then reassemble and test.
Post back with your results and let us know how you made out...
okay, i noticed something, whenever i i put the top piece on my rda the connection stops. why is that?
- Status
Similar threads
- Locked
- Locked
